离聚物及其共混体系的研究 Ⅰ．聚合物链引入同种离子的增容作用

通过苯乙烯（Ｓ）及甲基丙烯酸正丁酯（ｎＢｍａ）分别与少量的甲基丙烯酸（Ｍａａ）和马来酸酐（Ｍａｎ）共聚，从而在聚苯乙烯（ＰＳ）及聚甲基丙烯酸丁酯（ＰＢｍａ）链上分别引入了功能基因羧酸基和酸酐基，制得共聚物ＳＭａａ、ＢｍａＭａａ、ｓＭａｎ及ＢｍａＭａｎ．通过将这些共聚物分别交换上金属离子制备得相应的离聚物（Ｉｏｎｏｍｅｒ）及其共混物．红外光谱（ＩＲ）、差示扫描量热法（ＤＳＣ）及透射电镜（ＴＥＭ）的研究结果表明，共混物两组分均具有同种（负）电荷时，仍表现明显的增容作用．     

Influence of the technical process parameters on structural,mechanical and electrochemical properties of LiNi0.8Co0.15Al0.05O2 based electrodes – A review

The electrode manufacturing for lithium-ion batteries has been systematically evaluated. It has been shown that a proper tailoring of the electrodes can greatly improve both the electrochemical performance and the energy density of the battery. The pre-treatment of the electrode components, the degree of the electrode compacting and the mixing process have proven to have a strong impact on the electrochemical performance of the composite electrodes based on LiNi_0.80Co_0.15Al_0.05O₂. In addition, blending LiNi_0.80Co_0.15Al_0.05O₂ – NCA with lithium manganese oxide spinel (LiMn₂O₄, LMS) has exhibited beneficial effects on the discharge capacity of the blends, thus on the energy density and in the same time decreases the Mn dissolution from spinel structure. Moreover, the detailed study of the storage behaviour of LMS/NCA blend reveals that dissolved Mn from spinel structure is re-precipitable on NCA particles and so that less Mn²⁺ ions will be available in the electrolyte, which can migrate to the anode graphite and deposit thereof.     

基于SIFT特征的彩色图像拼接方法研究

针对传统特征提取拼接算法在复杂图像中配准过程中出现的过多误匹配,导致拼接后图像出现鬼影、模糊等问题,从而影响拼接图像的质量,提出一种改进的SIFT配准算法。在对目标图像提取SIFT特征后,利用SIFT描述子的尺度以及梯度方向信息建立最小邻域匹配剔除误匹配点,之后利用局部均方根误差(RMSE)评价映射矩阵与RANSAC算法相结合,迭代出精确变换模型。在对图像进行几何矫正后,提出一种自适应的混合线性算法对重合区域图像变换至HIS颜色空间进行图像拼接,最后得到平滑无缝的完整彩色全景拼接图像。实验结果证明,该算法在拼接复杂场景并且重合区域不多时仍有较好的准确性及稳定性。     

Preparation and characterization of CPPO/BPPO blend membranes for potential application in alkaline direct methanol fuel cell

A series of hydroxyl-conducting anion-exchange membranes were prepared by blending chloroacetylated poly(2,6-dimethyl-1,4-phenylene oxide) (CPPO) with bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO), and their fuel cell-related performances were evaluated. The resulting membranes exhibited high hydroxyl conductivities (0.022–0.032 S cm⁻¹ at 25 °C) and low methanol permeability (1.35 × 10⁻⁷ to 1.46 × 10⁻⁷ cm² s⁻¹). All the blend membranes proved to be miscible or partially miscible under the investigations of scanning electron microscopy (SEM) and differential scanning calorimeters (DSC). By condition optimization, the blend membranes with 30–40 wt% CPPO are recommended for application in direct methanol alkaline fuel cells because they showed low methanol permeability, excellent mechanical properties and comparatively high hydroxyl conductivity.     

Photodegradation of polypropylene/polystyrene blends: Styrene-butadiene-styrene compatibilisation effect

The mutual influence between the PP/PS polymer blend components during UV photodegradation was studied. Polypropylene (PP) and polystyrene (PS) have different photodegradation mechanisms, due to the larger UV absorption of polystyrene and formation of more stable tertiary carbon radicals. To compare the stabilities the kinetics of carbonyl formation was measured in different blend compositions. The results show that polystyrene presented a faster carbonyl formation than polypropylene, while the blends display faster kinetics than the isolated components. The kinetics of carbonyl formation of the blends was a function of polypropylene content. This result is unexpected if one considers the behaviour of each component alone. The kinetics and mechanism of UV degradation can be only explained taking into account the interaction between the blend components. PS absorbs UV light and energy is transferred to PP, which produces more reactive tertiary carbon free radicals. The effect of the interaction between the domains is enhanced when a compatibiliser is used, corroborating the hypothesis of energy transfer.     

石墨负极在Et4NBF4+LiPF6/EC+PC+DMC电解液中的电化学行为

在PC+EC+DMC复合溶剂体系中, 研究了Et4NBF4(四氟硼酸四乙基铵)与LiPF6组成的复合盐电解质对石墨负极材料界面性质的影响. 用循环伏安和恒电流充放电测试方法研究了电解液与石墨负极的相容性, 通过傅里叶变换红外光谱(FTIR)对固体电解质中间相膜(SEI)的成分变化进行了研究. 结果表明, 电解液中的Et4NBF4参与了SEI膜的形成; 当Et4NBF4浓度为0.2 和0.5 mol·L-1时, 电池首次充放电不可逆容量损失明显减少, 循环效率分别上升到76.0%和81.6%. Et4NBF4/LiPF6复合盐电解质改善了PC基电解质与石墨负极的相容性.     

聚乙烯醇/单宁共混膜的制备及其抗菌性能

采用溶液共混浇膜法制备了不同单宁含量的聚乙烯醇/单宁共混膜材料,利用扫描电镜(SEM)、广角X-射线衍射(WAXD)及示差扫描量热分析(DSC)对共混膜的结构进行了表征.结果表明,单宁和聚乙烯醇具有良好的相容性,聚乙烯醇的结晶能力及熔点均随单宁的加入量增大而稍降低.少量戊二醛的轻度交联作用使单宁在共混膜中非常稳定,在水中浸泡24 h后也仅有不到1.8%的单宁(相对膜中单宁总质量)渗出.接触法抗菌试验表明,所制备的共混膜对大肠杆菌(E.coli,CMCC 44103)、金黄色葡萄球菌(S.aureus,ATCC6538)和表皮葡萄球菌(S.epidermidis,ATCC 12228)都具有良好的抗菌能力,且随着单宁含量的升高而增强.     

PTW对PA1010/PP共混物的增容作用

为了增加聚酰胺1010/聚丙烯(PA1010/PP)共混物的相容性,提高共混物的力学性能,采用一种新型的反应型增容剂乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯共聚物(PTW)进行增容,通过扫描电镜(SEM)、力学性能、傅里叶变换红外光谱(FTIR)和差示扫描量热(DSC)测试,研究了PTW对PA1010/PP共混物的增容作用.结果表明,随着PTW的加入,共混物的相区尺寸明显变小,当PA1010/PP/PTW质量比为70∶30∶7时,分散相尺寸细小而均匀,表明PTW有较好的增容作用.FTIR结果表明,PTW上的环氧基团和PA1010在熔融共混中发生了化学反应.DSC研究结果表明,PA1010的结晶温度随PTW的加入而降低,说明PTW对PA1010结晶有抑制作用.另外,PTW的加入使PP的结晶温度下降,当PTW质量分数为5%时出现2个结晶峰,即出现异相成核结晶和均相成核结晶,PP均相成核结晶的出现从另一个方面说明,在PA1010基体中分散相PP尺寸非常细小.当PTW质量分数为7%时共混物的力学性能最佳,干态冲击强度达到13.93kJ/m2,是未加增容剂时的2倍,拉伸和弯曲性能基本不变.PTW的增容机理在于其分子链中的甲基丙烯酸缩水甘油酯能与PA1010发生化学反应,而乙烯链段与PP有较好的亲和性,从而降低界面张力,减少相区尺寸,大幅度提高力学性能.     

Using two-dimensional time resolved light scattering to study the cure reaction induced phase separation process of epoxy-amine-polyethersulfone blend with secondary phase separation

<正>The generalized two-dimensional correlation analysis based on time-resolved light scattering patterns(2D TRLS) has been employed to study the phase separation process of an epoxy-amine-polyethersulfone blend in which the secondary phase separation takes place.The results of the 2D TRLS provided more detailed information that was not readily observed in the 1D TRLS patterns.(i) During the first process of phase separation,the sequential order of coarsening in size of the domains among the larger and smaller ones has been reversed between the diffusion regime and the hydrodynamic regime. (ii) The change of the larger domains in size,due to the hydrodynamic flow in the late stage of the first phase separation process,keeps on taking place earlier than that of the new domains appeared in the secondary phase separation process. (iii) During the secondary phase separation process the size growth of the smaller domains takes place earlier than that of the larger ones,probably due to the assumption that the coarsening mode could decrease the interface tension more quickly.     

两亲性共聚物的分子设计与合成及其共混膜性能

从分子结构设计出发,采用自由基聚合、醚化、酯化、原子转移自由基聚合(ATRP)、可逆加成断裂链转移自由基聚合(RAFT)等方法合成了一系列具有不同分子结构(包括接枝、嵌段、交替、超支化等)和链形态(包括直链、梳状、哑铃状、链球状等)的两亲性共聚物,并对这些聚合物进行了谱学表征和性能测试.将这些两亲性共聚物与聚合物膜材料(包括聚偏氟乙烯、聚氯乙烯、聚砜、聚醚砜、聚醚砜酮等)进行溶液共混,通过相转化法制备共混膜,在成膜热力学和动力学分析的基础上,对共混膜的结构和性能进行调控.研究发现,两亲性共聚物在成膜过程中自发地向膜表面迁移富集,并进行自组装,在膜表面形成两亲性共聚物包膜,显著改善了聚合物多孔膜的亲水性和抗污染性能.此外,两亲性共聚物中的功能基团还可赋予共混膜某些功能特性,如生物相容性、环境响应性(pH、温度敏感性)、酶活性等.