A reinvestigation of quaternary layered bismuth oxyhalides of the Sillén X1 type

A family of layered bismuth oxyhalides, L^I_0.5Bi_1.5O₂X and L^IIBiO₂X has been reinvestigated. Formation of X1-type Sillén compounds has been established for L^I=Li, Na, L^II=Ca, Sr, Ba, and X=Cl, Br, I, but the details of their crystal structures are different. While all L^I_0.5Bi_1.5O₂X, CaBiO₂Br, and CaBiO₂I adopt the disordered tetragonal Nd₂O₂Te structure, all compounds of L^II=Sr and Ba are orthorhombic and isostructural to PbSbO₂Cl, due to L/Bi cation ordering. Crystal structures have been determined for CaBiO₂I, SrBiO₂Br, SrBiO₂I, and BaBiO₂I. We discuss the factors which determine the occurrence and type of cation ordering in the quaternary bismuth and antimony X1-type oxyhalides. We also predict that more isostructural compounds can be prepared with antimony.     

A study of bismuth-film electrodes for the detection of trace metals by anodic stripping voltammetry and their application to the determination of Pb and Zn in tapwater and human hair

This work reports the simultaneous determination of Cd(II), Pb(II) and Zn(II) at the low μg l⁻¹ concentration levels by square wave anodic stripping voltammetry (SWASV) on a bismuth-film electrode (BFE) plated in situ. The metal ions and bismuth were simultaneously deposited by reduction at −1.4 V on a rotating glassy carbon disk electrode. Then, the preconcentrated metals were oxidised by scanning the potential of the electrode from −1.4 to 0 V using a square-wave waveform. The stripping current arising from the oxidation of each metal was related to the concentration of each metal in the sample. The parameters for the simultaneous determination of the three metals were investigated with the view to apply this type of voltammetric sensor to real samples containing low concentrations of metals. Using the selected conditions, the limits of detection were 0.2 μg l⁻¹ for Cd and for Pb and 0.7 μg l⁻¹ for Zn at a preconcentration time of 10 min. Finally, BFE's were successfully applied to the determination of Pb and Zn in tapwater and human hair and the results were in satisfactory statistical agreement with atomic absorption spectroscopy (AAS).     

高性能Bi3+掺杂改性PbO2电极的制备及表征

采用电沉积法制备了金属Bi3+改性PbO2(Bi-PbO2)电极,并通过扫描电镜(SEM)、X射线能谱(EDS)、X射线光电子能谱(XPS)、X射线衍射(XRD)、紫外-可见漫反射(UV-VisDRS)、荧光光谱(FP)、莫特-肖特基(Mott-Schottky)曲线、电化学阻抗谱(EIS)和线性极化扫描(LSV)等方法表征了其微结构和电化学性能.SEM、EDS和XPS结果表明,Bi3+以Bi2O3的形式掺杂进入PbO2镀层,同时其掺杂改性可明显改善PbO2镀层的微结构,使电极表面颗粒细化;XRD和UV-VisDRS分析结果显示Bi3+掺杂改性后,PbO2晶体的晶胞参数发生变化,同时禁带宽度(Eg)变小;荧光光谱分析表明Bi-PbO2电极可促进羟基自由基的产生,增强电极降解有机物的催化活性;电化学性能测试显示,Bi3+改性PbO2电极电催化活性的提升与电极的平带电势(Efb)负移、活性表面积增大、电化学反应电阻减小和析氧电位提高有关.     

Synthese und Kristallstruktur von [(Me3Si)2BiCu(PMe3)3], dem ersten Komplex mit einer Bismut—Kupfer‐Bindung

Synthesis and Crystal Structure of [(Me₃Si)₂BiCu(PMe₃)₃] — the First Complex with a Bismuth—Copper Bond The reaction of CuO^t Bu with PMe₃ and Bi(SiMe₃)₃ in hexane yields the phosphine‐stabilized complex [(Me₃Si)₂Bi‐Cu( PMe₃)₃]. This synthesis gave rise to the first binuclear Bi—Cu compound to be structurally characterized by X‐ray crystallography.     

化学修饰铋膜电极的制备和应用研究进展

本文综述了近年来化学修饰铋膜电极的制备和应用的研究进展。首先介绍了铋膜电极的制备方法,然后介绍铋膜电极的应用和研究进展,包括铋膜电极在检测重金属离子、硝基酚类化合物、药物、杀虫剂及一些生物活性物质等方面的应用。     

碱性体系在线氢化物发生—原子荧光光谱法测定痕量铋

提出了一种碱性体系在线氢化物发生－原子荧光光谱法测定痕量铋的分析方法。设计了在线氢化物发生系统流路及操作程序，研究了碱性体系氢化物发生的各项最佳条件。方法操作简便快速，能有效地消除过渡元素的严重化学干扰。应用于黄铜标样中痕量铋的直接测定，获得满意结果。     

Selen‐Polykationen stabilisiert durch polymere Chlorobismutat‐Anionen: Synthesen und Kristallstrukturen von Se4[Bi4Cl14] und Se10[Bi5Cl17]

Selenium Polycations Stabilized by Polymeric Chlorobismuthate Anions: Syntheses and Crystal Structures of Se₄[Bi₄Cl₁₄] and Se₁₀[Bi₅Cl₁₇] Reactions of selenium with selenium(IV) chloride and bismuth(III) chloride in sealed evacuated glass ampoules at temperatures between 110 and 155 °C yield a series of compounds which are composed of discrete selenium polycations and polymeric chlorobismutate anions. Besides the already known Se₈[Bi₄Cl₁₄] two new compounds have been identified by crystal structure analyses as Se₄[Bi₄Cl₁₄] (tetragonal, P4/n, a = 1089.1(2) pm, c = 993.7(2) pm, Z = 2) and Se₁₀[Bi₅Cl₁₇] (monoclinic, P2₁/c, a = 1079.24(8) pm, b = 2062.9(2) pm, c = 1676.1(2) pm, β = 90.87(1)°, Z = 4). Se₄[Bi₄Cl₁₄] was obtained as red transparent platelike crystals and is the first example of a compound with (chalcogen₄)²⁺ ions of exact square‐planar symmetry and molecular point group D_4h in the solid state. The cations are surrounded by layers of two‐dimensional polymeric anions [Bi₄Cl₁₄]^2–. Se₁₀[Bi₅Cl₁₇] forms dark grey crystals with a reddish luster. The structure contains the known bicyclic polycation Se₁₀²⁺ which is disordered over two positions and the first three‐dimensional polymeric chlorobismutate anion [Bi₅Cl₁₇]^2–. The different BiCl_x polyhedra are linked by sharing common vertices, edges, and faces.     

Bismuth compounds in organic synthesis. Bismuth nitrate catalyzed chemoselective synthesis of acylals from aromatic aldehydes

Aromatic aldehydes are smoothly converted into the corresponding acylals in good yields in the presence of 3-10 mol% Bi(NO₃)₃·5H₂O. Ketones are not affected under the reaction conditions. The relatively non-toxic nature of the catalyst, its ease of handling, easy availability and low cost make this procedure especially attractive for large-scale synthesis.     

Bismuth triflate catalyzed Claisen rearrangement of allyl naphthyl ethers

Bismuth triflate was found to be an efficient catalyst for the Claisen rearrangement of allyl naphthyl ethers. The reaction proceeds smoothly with a catalytic amount of bismuth triflate (20 mol %) to afford the corresponding ortho-allyl naphthol in moderate to good yields in most cases.     

复合卤氧化铋纳米材料的合成及其光催化性能

采用低温沉淀法合成了一系列Bi OMxN1-x(M,N=Cl、Br、I)(0X1)复合材料,通过XRD、FESEM、TEM、EDS、UV-vis和PL等一系列表征和对有机物罗丹明光催化降解性能的研究表明:通过对复合材料合成过程中卤素离子含量的控制,使得此类固溶体具有独特的微观形貌和可控能带隙,使其在可见光下具有独特的光催化性能。在相同的光照条件下,Bi OCl0.5Br0.5、Bi OCl0.75I0.25和Bi OBr0.75I0.25相对于其他同系列的Bi OMxN1-x(M,N=Cl、Br、I)(0X1)微球样品而言,具有最好的光催化性能。