Solvent‐free inkjet printing process for the fabrication of conductive,transparent, and flexible ionic liquid‐polymer gel structures

A new and solvent‐free process for the fabrication of inkjet printed ionic liquid‐polymer gel microstructures with high‐resolution (line widths of ～40 μm), good electrical conductivity (5–30 mS cm^?1), optical transparency, and mechanical flexibility is presented. Carrying out the printing and polymerization process in nitrogen atmosphere eliminates the inhibiting influence of oxygen and guarantees homogeneously gelled structures. Careful selection and combination of ionic liquids (ILs) and unsaturated monomers makes it possible to achieve low viscosities which are printable with commercially available inkjet printers and printheads without adding extra solvents. By using different types and amounts of ILs and monomers the resulting properties of the printed IL‐polymer gels can be controlled in terms of ionic conductivity, optical transmission, and mechanical flexibility. Higher conductivities are possible by using a bifunctional instead of a monofunctional monomer, which allows one to lower the amount of monomer without loss in mechanical strength. Cast samples make it possible to obtain data of transmission (～90% for 170‐μm thick films) and mechanical flexibility (E = 0.02–0.23 MPa) of bulk material. Comparing electrical conductivity of printed and cast samples, the higher values of printed samples indicate the conductivity enhancing influence of moisture absorbed from the surrounding atmosphere after the fabrication process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Hexanes/acetonitrile: a binary solvent system for the efficient monosilylation of symmetric primary and secondary diols

Symmetric diols are useful compounds in the synthesis of natural products, their value often dependent on their successful monoprotection. A general and simple method for the monosilylation of symmetrical primary and secondary diols is reported. The method exploits the solubility differential of diols and their monosilylated counterparts in a binary hexanes/acetonitrile solvent system.     

“Kick‐Starting” oxetane photopolymerizations

In the presence of small amounts of 2,2‐dialkyl‐, 2,2,3‐trialkyl‐, or 2,2,3,3‐tetraalkyl substituted epoxides such as isobutylene oxide, 1,2‐limonene oxide, and 2,2,3,3,‐tetramethyl oxirane, the photoinitiated cationic ring‐opening polymerizations of 3,3‐disubstituted oxetanes are dramatically accelerated. The acceleration affect was attributed to an increase in the rate of the initiation step of these latter monomers. Both mono‐ and disubstituted oxetane monomers are similarly accelerated by the above‐mentioned epoxides to give crosslinked network polymers. The potential for the use of such “kick‐started” systems in applications such as coatings, adhesives, printing inks, dental composites and in three‐dimensional imaging is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2934–2946     

Highly active polymeric organocatalyst: Chiral ionic polymers prepared from 10,11‐didehydrogenated cinchonidinium salt

Since few examples of 10,11‐didehydrogenated (3‐ethynyl) cinchona alkaloids have been utilized as organocatalysts in asymmetric reaction, we synthesized 10,11‐didehydrogenated cinchonidine. The 3‐vinyl group of cinchonidine was transformed into a 3‐ethynyl functionality. Based on the resulting 10,11‐didehydrogenated cinchonidine, the corresponding quaternary ammonium salt and its dimers were prepared. The ion‐exchange reaction between the quaternary ammonium salt and sodium sulfonate produced the quaternary ammonium sulfonate as a stable ionic compound. Chiral ionic polymers were then synthesized by the ion‐exchange polymerization of the 10,11‐didehydrogenated cinchonidinium salt dimer and a disulfonate. The chiral ionic polymers were found to be capable of efficiently catalyzing the asymmetric alkylation of N‐(diphenylmethylene)glycine tert‐butyl ester. The enantioselectivities obtained with the polymeric catalysts were higher than those obtained with the corresponding monomeric catalyst. Dimers of 10,11‐didehydrogenated cinchonidinium salts were prepared. Treatment of the dimer with disodium disulfonate gave the chiral ionic polymers, which showed high catalytic activity in asymmetric benzylation of N‐(diphenylmethylen)glycine tert‐butyl ester. The polymeric catalysts were reused several times without the loss of catalytic activity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 621–627     

Polyazomethines Bearing Furan Moieties. Solution Polycondensation of Bis(furanic diamine)s and Aromatic Dialdehydes

A series of new polyazomethines containing furan moieties was synthesized by polycondensation of bifuranic diamine monomers with commercially available aromatic dialdehydes viz., terephthaldehyde (TPA), isophthaldehyde (IPA). Inherent viscosities and number average molecular weights of polyazomethines were in the range 0.90–1.56 dL/g and 10460–17850 (SEC, polystyrene standard), respectively indicating formation of medium to reasonably high molecular weight polymers. The resulting polyazomethines were characterized by solubility tests, viscosity measurements, FTIR, NMR, UV spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA). These furan-based polyazomethines were essentially amorphous and exhibited glass transition temperatures (Tg) in the 150–190°C range. The temperature at 10% wt loss (T₁₀), determined from TGA of polyazomethines were in the range 300–380°C, indicating their good thermal stability.     

Influence of Carboxylic Acids on the Synthesis of Chlorohydrin Esters from 1,3‐Butanediol

The influence of diverse carboxylic acid on the preparation of chlorohydrin esters using a one‐pot esterification–chlorination reaction, in which one of the reagents (chlorotrimethylsilane) acts as solvent, is described. Whereas the acid with low pKa provided higher amounts of the 2‐chloro regioisomer, the ones with higher pKa rendered the 1‐chloro regioisomer in 80% yield. These results are in accordance with the mechanism proposed in a previous article.     

The Influence of Monomers upon Microemulsions with Short Chain Cosurfactant

Several monomers (i.e., acrylonitrile (ACN), ethyl acrylate (EtA), acrylate of 2 ethylhexyl (EHA), butyl acrylate (BuA), vinyl acetate (VAc), methyl methacrylate (MMA) and styrene (St)) were investigated in order to study their capacities to form microemulsions. The surfactant was nonyl phenol ethoxylate with 25 moles ethylene oxide and ethanol was used as the cosurfactant. The phase diagrams prove that the capacity for microemulsion formation varies in the following sequence: ACN = EtA > VAc > BuA > MMA > St > EHA. Conductometric and refractometric studies allowed us to evidence the formation of microemulsions with W/O, bicontinuous or O/W structure. Fluorescence studies give interesting informations on the stabilization capacity of the monomers dispersed by interaction with hydrophobic chain of the cosurfactant. H-NMR studies suggest that the monomers in microemulsions lie in regions with various polarities as function of their chemical nature. In polymerization initiated with benzoyl peroxide the minimum conversions were obtained in zones of composition where the initial microemulsions possess a bicontinuous microstructure. The reactions of degradative transfer of the increasing macroradicals account for these conversion modifications. For initiation with ammonium persulphate, its rate of decomposition depends on its ability to displace the proton bonded to the substituted vinylic carbon of the monomer. The productivity of this initiator varies within the sequence MMA > EtA > BuA > St > ACN > VAc. The consumption of the initiator, as induced by the monomer, depends on its chemical nature and on the solubilization site of the microemulsions.     

Monomers and polymers from plant oils via click chemistry reactions

As a consequence of the depleting of fossil reserves and environmental issues, today, plant oils and fatty acids derived therefrom have a respectable status within the polymer chemistry community. However, maximizing the benefits of these renewable feedstocks requires the utilization of sustainable and efficient chemical transformations. The emergence of click chemistry concept and especially the renaissance of thiol‐ene addition reaction have had an impact on the way to make plant oil‐derived polymers. This highlight discusses the applicability and success of thiol‐ene addition and other click reactions in the transformation of oleochemicals into monomers and polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013     

The 2‐Cyano‐2,2‐dimethylethanimine‐N‐oxymethyl Group for the 2′‐Hydroxyl Protection of Ribonucleosides in the Solid‐Phase Synthesis of RNA Sequences

The reaction of 2‐cyano‐2‐methyl propanal with 2′‐O‐aminooxymethylribonucleosides leads to stable and yet reversible 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl)ribonucleosides. Following N‐protection of the nucleobases, 5′‐dimethoxytritylation and 3′‐phosphitylation, the resulting 2′‐protected ribonucleoside phosphoramidite monomers are employed in the solid‐phase synthesis of three chimeric RNA sequences, each differing in their ratios of purine/pyrimidine. When the activation of phosphoramidite monomers is performed in the presence of 5‐benzylthio‐1H‐tetrazole, coupling efficiencies averaging 99 % are obtained within 180 s. Upon completion of the RNA‐chain assemblies, removal of the nucleobase and phosphate protecting groups and release of the sequences from the solid support are carried out under standard basic conditions, whereas the cleavage of 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl) protective groups is effected (without releasing RNA alkylating side‐products) by treatment with tetra‐n‐butylammonium fluoride (0.5 m) in dry DMSO over a period of 24–48 h at 55 °C. Characterization of the fully deprotected RNA sequences by polyacrylamide gel electrophoresis (PAGE), enzymatic hydrolysis, and matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry confirmed the identity and quality of these sequences. Thus, the use of 2′‐O‐aminooxymethylribonucleosides in the design of new 2′‐hydroxyl protecting groups is a powerful approach to the development of a straightforward, efficient, and cost‐effective method for the chemical synthesis of high‐quality RNA sequences in the framework of RNA interference applications.