Cyclic esters of aliphatic diacids with pyrocatechol and hydroquinone

Cyclic esters of adipic acid, suberic acid and sebacic acid were prepared by reaction of the acid dichlorides and pyrocatechol or hydroquinone in benzene under high dilution conditions. While only the cyclic dimers could be obtained from hydroquinone, pyrocatechol formed cyclic monomers as well as cyclic dimers (and also a cyclic dimer with succinic acid). The structure of all compounds was confirmed by¹H-NMR- and mass spectra. The crystal structures of the pyrocatechol esters were determined by single crystal X-ray analysis.

---

Cyclische Ester aliphatischer Dicarbonsäuren mit Brenzcatechin und Hydrochinon

Zusammenfassung Es wurden cyclische Ester von Adipinsäure, Korksäure und Sebacinsäure durch Reaktion der entsprechenden Säure-Dichloride mit Brenzcatechin oder Hydrochinon bei hoher Verdünnung hergestellt. Während mit Hydrochinon lediglich die cyclischen Dimeren erhalten werden konnten, wurden mit Brenzcatechin sowohl cyclische Monomere als auch cyclische Dimere erhalten (ebenfalls das cyclische Dimer mit Bernsteinsäure). Die Strukturen wurden mittels¹H-NMR und Massenspektren gesichert. Die Kristallstrukturen der Brenzcatechin-Ester wurden mittels Röntgenstrukturanalyse bestimmt.

     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

TG and DSC studies of filled porous copolymers

A complex approach including thermogravimetry, differential thermal analysis and differential scanning calorimetry was applied to study characteristics of non-filled and filled porous copolymers of divinylbenzene with styrene or some acrylic monomers: di(methacryloyloxymethyl)naphthalene, methacrylic ester of p,p’-dihydroxydiphenylpropane diglycidyl ether, and dimethacrylglycolethylene. High disperse silicas with the grafted methyl and silicon hydride groups in the surface layer were used as fillers. The kinetic parameters of thermal degradation for composites obtained were determined by different methods.     

胆甾-4α-甲基-8-烯-3β，7α-二醇二乙酸酯的结构与性质研究

Lophenol, cholest-4α-methyl-7-en-3β-ol (1), obtained from Dracaena cochinchinensis (Lour.) S. C. Chen, was structurally modified. It was acetylated to protect 3β-hydroxyl group, and then oxidised by selenium dioxide in acetic acid to give cholest-4a-methyl-8-en-3β, Ta-diol diacetate (3). This compound 3 is unstable in chloroform solution or when heated and easily converted to a diene compound, cholest-4a-methyl-7,14-dien-3β-ol acetate (4). The structures of 3 and 4 were elucidated by means of IR, ^1H NMR, ^13C NMR and MS, and the absolute configuration of 3 was established by X-ray crystallography. The property of 3 was also discussed in this paper. Both 3 and 4 are new compounds and were reported for the first time.     

Highly luminescent diyne (?CC?CC?) containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer: Synthesis and characterization

Luminophoric dialdehyde 1,4‐bis[4‐formylphenylethynyl‐(2,5‐dioctadecyloxyphenyl)‐buta‐1,3‐diyne] ( 4 ) enables the synthesis of diyne‐containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer poly[1,4‐phenylene‐ethynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐butadi‐1,3‐ynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethynylene‐1,4‐phenylene‐ethene‐1,2‐diyl‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethene‐1,2‐diyl] ( 7 ) with a well‐defined general structure (? Ph? C?C? Ar? C?C? C?C? Ar? C?C? Ph? CH?CH? Ar? CH?CH? )_n, which was confirmed by NMR and infrared spectroscopy. The highly luminescent material is thermostable, soluble in usual organic solvents through the grafting of octadecyloxy side groups, and can be processed into transparent films. With the aim to investigate the effect of ? C?C? C?C? in the photophysical behavior of 7 , a comparison of the photophysics of monomers 3 [1,4‐bis(4‐formylphenylethynyl)‐2,5‐dioctadecyloxybenzene] and 4 and subsequently of their respective polymers 6 and 7 has been carried out. Similar photophysical behaviors for 6 (poly[1,4‐phenylenethynylene‐1,4‐(2,5‐dioctadecyloxyphenylene)ethene‐1,2‐diyl]) and 7 were observed in dilute CHCl₃ solution as a result of an identical chromophore system responsible for the absorption (λ_a = 448 nm) and emission (λ_f = 490 nm) in both compounds. The increased planarization and enhanced rigidity of the conjugated backbone in the solid state at room temperature as well as in frozen dilute tetrahydrofuran solution at 77 K cause the bathochromic shift of the absorption and emission spectra. The large octadecyloxy side chains obviously limit strong π‐π interchain interactions in the solid films, which explains the high fluorescence quantum yields of 35 and 52% obtained for 6 and 7 , respectively. The energetically arduous migration of the π electron through the diyne units not only requires a higher threshold voltage for the detection of photoconductivity in 7 but could possibly limit radiationless deactivation channels of the exciton, which explains the approximate 20% fluorescence quantum yields difference between 6 and 7 in the solid state. The electron‐withdrawing effect of the triple bonds confer both 6 and 7 with a good electron‐accepting property (E^ox = 1.39 V vs Ag/AgCl) if used in light‐emitting diode devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2670–2679, 2002     

Studies on the electro-optical and the light-scattering properties of PDLC films with the size gradient of the LC droplets

Polymer dispersed liquid crystal (PDLC) films with the size gradient of the LC droplets were prepared based on the epoxy/acrylate hybrid polymer matrix. The ultraviolet (UV) intensity gradient was induced by the UV-absorbing dye over the thickness of the samples. Taking advantage of the difference between the epoxy monomers and acrylate monomers in polymerisation rates and the UV intensity gradient, the gradient distribution of the LC droplet size was formed in PDLC films. The effect of the size gradient of the LC droplets on the electro-optical and the light-scattering properties of PDLC films was investigated. The results showed that due to the size gradient distribution of the LC droplets, PDLC films could exhibit the strong light scattering in the UV-visible-near infrared (VIS-NIR) region. Consequently, it provides a potential approach for modulating NIR light transmittance.     

Alternative Approach to an AB2 Monomer for Hyperbranched Poly(Arylene Ether Ketone Imide)s

An alternative approach to an AB₂ monomer, N‐[3,5‐bis(4‐hydroxybenzoyl)benzene]‐4‐fluorophthalimde, 4, for hyperbranched poly(arylene ether ketone imide)s has been developed. The key steps were a para‐position selective electrophilic aromatic substitution of fluorobenzene with 5‐nitroisophthaloyl dichloride and a subsequent clean conversion of the aryl fluorides to phenol groups using potassium hydroxide as the nucleophile. The overall yield for the synthesis of 4 was 51.6%.     

Radical addition fragmentation chain transfer (RAFT) polymerization of ferrocenyl (Meth)acrylates

We report on the controlled free radical homopolymerization of 1‐ferrocenylethyl acrylate as well as of three new ferrocene bearing monomers, namely 4‐ferrocenylbutyl acrylate, 2‐ferrocenylamido‐2‐methylpropyl acrylate, and 4‐ferrocenylbutyl methacrylate, by the RAFT technique. For comparison, the latter monomer was polymerized using ATRP, too. The ferrocene containing monomers were found to be less reactive than their analogues free of ferrocene. The reasons for the low polymerizability are not entirely clear. As the addition of free ferrocene to the reaction mixture did not notably affect the polymerizations, sterical hindrance by the bulky ferrocene moiety fixed on the monomers seems to be the most probable explanation. Molar masses found for 1‐ferrocenylethyl acrylate did not exceed 10,000 g mol^?1, while for 4‐ferrocenylbutyl (meth)acrylate molar masses of 15,000 g mol^?1 could be obtained. With PDIs as low as 1.3 in RAFT polymerization of the monomers, good control over the polymerization was achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Simultaneous analysis of bisphenol A based compounds and other monomers leaching from resin‐based dental materials by UHPLC–MS/MS

Resin‐based dental materials have raised debates concerning their safety and biocompatibility, resulting in a growing necessity of profound knowledge on the quantity of released compounds into the oral cavity. In this context, the aim of this study was to develop a comprehensive and reliable procedure based on liquid chromatography with mass spectrometry for the simultaneous analysis of various leached compounds (including bisphenol A based compounds) in samples from in vitro experiments. Different experiments were performed to determine the optimal analytical parameters, comprising mass spectrometry parameters, chromatographic separation conditions, and sample preparation. Four internal standards were used as follows: deuterated diethyl phthalate and bisphenol A (commercially available), and deuterated analogues of triethylene glycol dimethacrylate and urethane dimethacrylate (custom‐made). The optimized method was validated for linearity of the calibration curves and the associated correlation coefficient, lower limit of quantification, higher limit of quantification, and intra‐ and interassay accuracy and precision. Additionally, the developed liquid chromatography with tandem mass spectrometry method was applied to the analysis of leaching compounds from four resin‐based dental materials. The results indicated that this method is suitable for the analysis of different target compounds leaching from dental materials. This method might serve as a valuable basis for quick and accurate quantification of leached compounds from resin‐based dental materials in biological samples.     

Effect of different plasticizers on the secondary relaxation of poly(vinyl chloride)

Samples of poly(vinyl chloride) plasticized with variable amounts of either dibutyl phthalate (DPB) or dicyclohexyl phthalate (DCHP) were investigated by dynamic-mechanical measurements in the β relaxation temperature range. In this range of temperature, a superposition of the relaxation due to the cyclohexyl group with the PVC β peak was found for the samples plasticized with DCHP. By studying the dependence of the activation energy and of the peak broadness on the DCHP concentration it was possible to show that the PVC β relaxation is reduced to zero at the critical plasticizer weight fraction W₁ = 0.2. For the PVC-DBP series the β peak disappears at the same plasticizer content. These results strengthen the hypothesis that the β peak of PVC is due to a kind of cooperative motion since 1 mole of plasticizer for every 20 repeating units of the polymer is sufficient to suppress the PVC β relaxation.