Properties of Natural Rubber/Recycled Chloroprene Rubber Blend: Effects of Blend Ratio and Matrix

The present study investigated the effects of two types of natural rubber and different blend ratios on the cure, tensile properties and morphology of natural rubber/recycled chloroprene rubber blends. The blends of natural rubber/recycled chloroprene rubber were prepared by using laboratory two-roll mill. The result showed that the cure time prolonged with the addition of recycled chloroprene rubber (rCR). Comparability, natural rubber/recycled chloroprene rubber (SMR L/rCR) blendcured rapidly than epoxidized natural rubber/recycled chloroprene rubber (ENR 50/rCR) blend. The addition of rCRalso caused a decrement in the tensile strength and elongation at break for both rubber blends. The SMR L/rCR blendsshowed higher tensile strength and elongation at break compared to those of ENR 50/rCR blends at any blend ratios.     

Heat capacities of solid polymers

The heat capacity of a solid polymer is governed by the manner in which the internal energy is distributed over the various degrees of freedom. If the internal energy manifests itself in harmonic oscillatory motions, the heat capacity is the sum of contributions of the normal modes of motion. In practice, full frequency data are not generally available for polymers. This paper proposes an empirical method for determining the heat capacities of linear high polymers by the addition of contributions from different chain segments. A survey of heat capacity data for 30 linear high polymers and several copolymer systems has revealed that additivity is usually valid for a temperature range from about 60°K to the glass-transition temperature. A table of heat capacity contributions of a number of polymer constituents is derived which permits the calculation of unknown heat capacities to an accuracy of ±5% or better. In addition, δC_p data for the increase of the heat capacity at the glass-transition temperature were found to agree with the rule of constant heat capacity increase per mole of “bead” proposed 8 years ago.     

Polypropylene/polystyrene/clay blends prepared by an innovative eccentric rotor extruder based on continuous elongational flow: Analysis of morphology,rheology property,and crystallization behavior

The polypropylene (PP)/polystyrene (PS)/montmorillonite (MMT) blends were prepared by an innovative eccentric rotor extruder based on continuous elongational flow. Addition of MMT nanoparticles was found to reduce the PS droplet size and improve the compatibility of PP/PS. The MMT nanoparticles had clear intercalation and/or exfoliation structures and were located mostly at the interface of PP/PS. It was found that the intercalation and exfoliation of MMT was finished under the synergy of interfacial interaction and tensile deformation so that we called the mechanism as “MMT exfoliation mechanism induced by synergy of interface and tensile deformation”. The rheological analysis showed that incorporation of MMT led to an increase in complex viscosity to an optimum level (5 wt%), after which any further increase in MMT concentration decreased the complex viscosity. Moreover, the degree of crystallinity of blends was controlled by the heterogeneous nucleation effect of MMT and the inhibition effect of PS.     

Impact of side‐chain length on the phase structures of P3ATs and P3AT:PCBM films as revealed by SSNMR and FTIR

It is known that poly(3‐alkylthiophene) (P3AT) side‐chain length notably influences the photovoltaic performances of relating devices. However, comprehensively study on its impact on the structures of P3ATs and their blends with [6, 6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) is insufficient. By using solid‐state NMR and FTIR techniques, four P3ATs and their PCBM blends are investigated in this work, focusing on the phase structures as modulated by side‐chain length. Recently, we revealed multiple crystalline main‐chain packings of packing a and b together with a mesophase in poly(3‐butylthiophene) (P3BT) films (DOI: 10.1021/acs.macromol.6b01828). Here, the semicrystalline structures are investigated on poly(3‐hexylthiophene) (P3HT), poly(3‐octylthiophene) (P3OT), and poly(3‐dodecylthiophene) (P3DDT) with traditional form I modification, where packing a and the amorphous phase are probed. Furthermore, crystallized side chain within packing a is detected in both P3OT and P3DDT films, which shows a FTIR absorption at 806 cm⁻¹. Structural studies are also conducted on P3AT:PCBM blends. Compared with the pure P3ATs, the polymer crystallinities of the blends show reduction of about 40% for P3OT and P3DDT, whereas only about 10% for P3HT. Moreover, in P3BT:PCBM and P3HT:PCBM, the crystalline polymers and PCBM are phase separated, while in P3OT:PCBM and P3DDT:PCBM, blend components are mostly miscible. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 751–761     

Exploratory Analysis for Elemental Characterization of Biomass Residues From Biodiesel Production by Inductively Coupled Plasma Optical Emission Spectrometry

Edible and non-edible seeds with high oil content are used as the main raw material for biodiesel production. The residual biomass (press cake or oil cake) can be used as animal feed, to aggregate value to the biodiesel production cycle. In this work, a microwave-assisted-digestion procedure for elementary determination by inductively coupled plasma optical emission spectrometry (ICP OES) using dilute nitric acid was developed. Inter-laboratorial reference material was used to check the accuracy. A full factorial design in addition to exploratory analysis through principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to classify the samples: press cakes from castor (Ricinus communis), jatropha (Jatropha curcas), radish (Raphanus sativus), sunflower (Heliantus annus), and coffee (Coffe arabica), according to their similarities.     

Deuterium solid echo line shape study of poly(ethylene oxide) dynamics in a blend with poly(methyl methacrylate)

Deuterium solid echo line shapes were measured on deuterated poly(ethylene oxide) (d₄PEO) in a blend with protonated poly(methyl methacrylate) to characterize chain dynamics of this component in the blend. Line shapes were observed as a function of temperature from 183 to 243 K and echo delay times from 10 to 100 μs on a blend containing 20 wt % d₄PEO. The line shapes and the associated relative intensities were quantitatively interpreted in terms of segmental motion and libration. The results of the interpretation are compared to an earlier study of deuterium spin‐lattice relaxation times over the temperature range of 313 to 413 K. A combined interpretation of both sets of data is developed based on bimodal distribution of correlation times that are separated by about 2 orders of magnitude in time. The faster mode is 30% of the correlation function with a stretched exponent near one while the slower mode is characterized by an exponent of 0.5. The source of the bimodal character is not revealed by the line shape and relaxation data but is consistent with the presence of two glass transition temperatures in this miscible blend and anomalous translational diffusion of diethyl ether through the blend. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2433–2444, 2005     

Percolation Thresholds in Ternary Polymer Melt Blends with Separate Dispersions of the Inner Phases: Mathematical Model

A mathematical model based on a straightforward geometrical background is developed which enables predictions of a transition of one dispersed phase to a cocontinuous one (i.e., the percolation threshold) on addition of another dispersed phase during melt mixing in ternary polymer blends. The present work concerns only ternary blends with two separate dispersions of the inner phases in which no encapsulation takes place. In addition, in order to simplify the model, one of the inner phases was represented by hard, nondeformable microspheres The expression developed describes well an experimental relationship between the percolation threshold, the concentration above which the former dispersed phase transforms to a continuous one, and concentrations of both inner phases. The results agree well with the experimental data obtained in a previous work.     

Antibacterial and Miscibility Properties of Chitosan/Collagen Blends

The miscibility, bioactivity, and antibacterial properties of chitosan/collagen specimens were systematically studied. The specimens were prepared by blending collagen and chitosan with varying deacetylation degrees in solutions; the collagen molecules had been extracted from pigskins using the acid swelling-pepsin digestion method. To understand the miscibility properties of collagen and chitosan molecules, the intrinsic viscosity and differential scanning calorimetry analysis of collagen, chitosan, and collagen/chitosan specimens were performed. The instrinsic viscosity measurements suggested that chitosan and collagen molecules with varying deacetylation degrees were miscible at molecular level for all compositions and degrees of deacetylation of chitosan/collagen mixture solutions prepared in this study. Fourier transform infrared analyses suggested that the percentage of preserved triple helix structures present in collagen molecules in collagen/chitosan specimens decreased with increasing chitosan contents, since the ratios of peak absorbance at 1239 cm^?1 of amide III and 1455 cm^?1 of C?H bending of collagen/chitosan specimens decreased significantly with increase in their chitosan contents. Abnormally high denaturation temperatures (T_d) were observed as the chitosan contents of collagen/chitosan specimens reached 40 wt%, at which T_d of collagen molecules was even higher than that of the corresponding pure chitosan molecules with varying deacetylation degrees. The antibacterial activity of collagen/chitosan blends increased consistently with increasing deacetylation degrees and concentrations of chitosan molecules in collagen/chitosan solutions. Possible explanations for these interesting thermal denaturation, antibacterial, and miscibility properties of chitosan/collagen specimens are reported.