Meshless simulation of equilibrium swelling/deswelling of pH‐sensitive hydrogels

Hydrogels have been widely used in microelectromechanical systems (MEMS) and Bio‐MEMS devices. In this article, the equilibrium swelling/deswelling of the pH‐stimulus cylindrical hydrogel in the microchannel is studied and simulated by the meshless method. The multi‐field coupling model, called multi‐effect‐coupling pH‐stimulus (MECpH) model, is presented and used to describe the chemical field, electric field, and the mechanical field involved in the problem. The partial differential equations (PDEs) describing these three fields are either nonlinear or coupled together. This multi‐field coupling and high nonlinear characteristics produce difficulties for the conventional numerical methods (e.g., the finite element method or the finite difference method), so an alternative—meshless method is developed to discretize the PDEs, and the efficient iteration technique is adopted to solve the nonlinear problem. The computational results for the swelling/deswelling diameter of the hydrogel under the different pH values are firstly compared with experimental results, and they have a good agreement. The influences of other parameters on the mechanical properties of the hydrogel are also investigated in detail. It is shown that the multi‐field coupling model and the developed meshless method are efficient, stable, and accurate for simulation of the properties of the stimuli‐sensitive hydrogel. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 326–337, 2006     

Effect of glass bead packing on the fibrillation of liquid‐crystalline polymer in polycarbonate

Polycarbonate (PC) was melt blended with small amount of liquid‐crystalline polymer (LCP) and various contents of glass beads (GB) having different diameters. The rheological measurements indicated that the GB addition increased the viscosity ratio and seemed unfavorable to the LCP fibrillation. However, the morphological observation showed that the LCP fibrillation was promoted by the GB addition and varied with the GB packing. With the increased GB packing by increasing the GB content and/or decreasing the GB diameter, LCP deformed from spheres and ellipsoids into stretched ellipsoids at lower shear rates and into long fibrils at higher shear rates. Although higher content of smaller GB jammed into the larger LCP droplets and inhibited the LCP fibrillation, very long LCP fibrils formed at higher shear rates at a high enough packing of GB. The relationship between GB packing and LCP fibrillation revealed two kinds of hydrodynamic effects of GB promoting the LCP fibrillation: at lower GB packing, the shear flow was enhanced by the high local shear between GB, in quantity; and for a high enough GB packing, the shear flow was changed, in quality, into elongational flow, which was more effective for the LCP fibrillation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1020–1030, 2006     

Standardization and certification in the area of environmentally degradable plastics

Environmentally degradable polymers and plastics (EDPs) are a group of polymeric materials experiencing a rapid growth in number as well as in their applications and quantities used. The assessment of their key characteristic - degradability, including eventually biodegradability as the ultimate stage, is scientifically and technically a challenging issue and has led to differing interpretations in the past. In order to standardize techniques and criteria a number of standards were established by different standardization bodies which are also used as a basis for certification schemes. An up-to-date inventory of the rapidly growing standardization body is presented with basic interpretation to help guide the non-expert. A basic introduction to EDPs and polymer degradation is added for clarity.     

Moisture sorption, transport, and hydrolytic degradation in polylactide

Management of moisture penetration and hydrolytic degradation of polylactide (PLA) is extremely important during the manufacturing, shipping, storage, and end-use of PLA products. Moisture transport, crystallization, and degradation, in PLA have been measured through a variety of experimental techniques including size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Quartz crystal microbalance and dynamic vapor sorption experiments have also been used to measure moisture sorption isotherms in PLA films with varying crystallinity. A surprising result is that, within the accuracy of the experiments, crystalline and amorphous PLA films exhibit identical sorption isotherms.     

Branched polymers in a wedge geometry in three dimensions

We investigate the statistical and dimensional properties of uniform star polymers attached by the branching vertex of degreef in a wedge geometry in three dimensions and described by the wedge angles and. We show that the growth constant is equal to ^f , where is the self-avoiding walk limit. Thef and (, ) dependences of the corresponding critical exponent _f (, ) are studied using Monte Carlo techniques. In the casef=1, our results are compared with existing predictions obtained from series expansion and renormalization group methods. We have also estimated the amplitudes for the mean square radius of gyration and the mean square end-to-end branch length. Our results for the ratio of the mean square radius of gyration of anf-star to that of a linear polymer of the same degree of polymerization attached in a similar wedge, and the analogous ratio for the mean square end-to-end branch length, are consistent with these ratios being lattice-independent quantities.     

Novel scaling behavior of directed polymers: Disorder distribution with long tails

We study the problem of directed polymers (DP) on a square lattice. The distribution of disorder is assumed to be independent but non-Gaussian. We show that for distributions with a power-law tailP() 1/||¹⁺ , where>2, so that the mean and variance are well defined, the scaling exponentv of the DP model depends on in a continuous fashion.     

Directed polymers in Hartree-Fock approximation

A replica trick is used to map the problem of directed polymers into a quantum mechanics problem ofn-body bound states. This bound-state problem is then treated using a self-consistent method of Hartree-Fock. Ford=2, the exact result of the DP exponents is reproduced; and for complex DP, the ground-state energyE _n n² is found, confirming previous numerical results.     

聚(酪氨酸酯对苯二甲酰胺)碳酸酯药物控制释放材料的研究

报道了一类生物可降解聚（酪氨酸酯对苯二甲酰胺）碳酸酯的合成和结构表征，研究了聚合物的性质和体外降解性能，并以５ 氟脲嘧啶和牛血清白蛋为模型，对它们作为药物控制释放材料的性能进行了初步评价．     

热活化延迟荧光聚合物及其电致发光器件

热活化延迟荧光(TADF)聚合物,不仅具有小分子TADF材料高的激子利用效率特性,而且还具备分子多样性好、可溶液加工、低成本、以及易实现大面积柔性器件等诸多优势,在近几年受到广泛的关注并展现了良好的应用前景。本文从TADF聚合物分子设计原理、器件结构及发光机理出发,依据TADF聚合物的构筑方法不同,概括了其结构设计策略,详述了各种类型TADF聚合物的分子结构和光电性能及其在有机电致发光器件领域应用的研究进展,最后探讨了TADF聚合物存在的问题,并展望了其发展前景。