Study of Electrical Conductivity of Para-Toluene Sulfonic Acid Doped Polyaniline/Polyester-Based Polyurethane Blends in the S-Band Frequency Range

Conducting polymer blends were prepared using polyaniline doped with para- toluene sulfonic acid (PTSA-PANI) and a polyester polyol-based polyurethane (PU). The morphological, thermal and dielectric properties of the PTSA-PANI/PU blends in the frequency range of 1–5 GHz (S band) were investigated. It was found that the morphology of the samples was affected by the PTSA-PANI loading, resulting in the formation of agglomerates and pathways when above 10 wt%. The thermal stability of the composites was improved with increased PTSA-PANI loading. The electrical conductivity percolation threshold was obtained at 2.5% of PTSA-PANI loading and the electrical conductivity reached the value of 0.13 S/m at a PTSA-PANI loading of 30 wt%. The obtained results for the PTSA-PANI/PU blends prepared indicate a high potential for their successful use in electrical and electromagnetic applications.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Effect of Chain Length of Polyethylene Glycol and Crosslink Density (NCO/OH) on Properties of Castor Oil Based Polyurethane Elastomers

The equilibrium swelling study of polyurethanes (PU) was carried out in various solvents in order to calculate their solubility parameter. The kinetics of swelling and sorption have also been studied in 1,4‐dioxane at 30°C. The PU was synthesized by reacting a novel polyol (castor oil derivative and epoxy based resin, EpxR) and one of the polyethylene glycols (PEG 200, PEG 400, PEG 600) with different weight compositions, with a toluene diisocyanate (TDI) adduct (derived from toluene diisocyanate and R60 polyol). Different NCO/OH ratio viz. 1, 1.3 and 1.7 were employed in the study. The results were found to vary with the weight composition of polyol components, as well as the crosslink density of the samples. The sorption behavior is also found to vary with the molecular weight of polyethylene glycol employed in the preparations of the polyurethanes. Kinetic studies of swelling revealed that the sorption is anomalous in nature. The diffusion coefficient (D) increased with an increase in the NCO/OH ratio and decreased with an increase in chain length of polyethylene glycol. The sorption coefficient (S) decreased with an increase in crosslink density (NCO/OH) and increased with increasing polyethylene glycol (i.e., PEG 200, PEG 400, and PEG 600) moieties in the polyurethanes. The molecular weight between two crosslink points was calculated using the Flory Rehner equation (24), and hence, the number of chains per unit volume (N) and degree of crosslinking (ν) in all the samples were determined.     

Studies on the Particle Morphology of Waterborne Cationic Polyurethane/Polyacrylate Microemulsions

Polyurethane containing tertiary nitrogen atoms was synthesized from polyol, diphenylmethane diisoccyanate (MDI) and N‐methyl diethanolamine. The polymer was converted into cationomers by quarternizing with methacrylic acid (MAA) and then dispersed in water. In this reaction, methyl methacrylate (MMA) was used to decrease viscosity; at the same time, it was the monomer in the later reaction. Finally the cationic polyurethane dispersions were further polymerized with an oil‐soluble initiator, azobisisobutyronitrile (AIBN), water‐soluble initiator, K₂S₂O₈ (KPS) and the mixture of AIBN and KPS. The different emulsion particles with shell‐core structure, “invert” shell‐core structure and “irregular” sandwich structure were obtained; the morphological structures were characterized by TEM observation, FT‐IR and particle size analysis.     

Mechanical,Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites

The meta kaolin (MK) clay particulate filler with different weight ratios viz., 0, 5, 10, 20 and 30 wt% were incorporated into castable polyurethane (PU)/polystyrene (PS) (90/10) interpenetrating polymer network (IPN). The effects of MK particulate filler loading on the mechanical and thermal properties of PU/PS (90/10) IPN composites have been studied. From the tensile behavior, it was noticed that a significant improvement in tensile strength and tensile modulus as an increase in MK filler content. Thermogravimetric analysis (TGA) data reveals the marginal improvement in thermal stability after incorporation of MK filler. TGA studies of the IPN composites have been performed in order to establish the thermal stability and their mode of thermal degradation. It was found that degradation of all composites takes place in two steps. Degradation kinetic parameters were obtained for the composites using three mathematical models. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic (SEM) technique.     

Novel Ibuprofen‐based Polyurethane: A New Approach for Drug Delivery

Facile synthesis of novel ibuprofen bearing polyurethane 1 has been achieved for the first time and found to display the release pattern of ibuprofen based on the easy cleavage of ester linkages. Thorough characterizations (FT‐IR, UV‐Vis, NMR, and elemental analysis) were performed to ascertain the structure of polyurethane 1.     

Synthesis and Characterization of Silicone Modified Polyurethane Surfactant Useable at High Temperature

A series of novel silicone modified polyurethane (Si-PU) surfactants were successfully synthesized by using hydroxypropyl-terminated polydimethylsiloxane (HPMS), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and isophoronediisocyanate (IPDI). The chemical structure of the surfactant was confirmed by FTIR and ¹H-NMR. TEM photographs showed that the micelles of the Si-PU surfactants dispersed in aqueous solution were spherical with the particle size in the range of 100–400 nm. Surface tension measurements indicated that these surfactants had low surface tension to 29.9 mN·m^?1and a definite critical micelle concentration to, approximately 5.0×10^?4–7.5×10^?4mol·L^?1. When the content of HPMS was 20 wt%, the surfactant's, emulsifying performance was superior to the traditionally available Span80/Tween80 mixed emulsifiers. In addition to that, no phase transition temperature was detected from 20°C to 90°C by fluorescence probe and DSC measurements, confirming the high thermal stability of the micelles.     

Helical Biphenyl Bisazo Polyurethane: Preparation,Characterization and Analysis of Polymeric Thermo-Optic Switch

The bisazo chromophore molecule (CAAPM) and helical biphenyl bisazo polyurethane (HBBPU) were synthesized. The structures of CAAPM and HBBPU were characterized by FT-IR and UV-vis spectroscopic techniques. The measurements of refractive index and thermo-optic coefficient (dn/dT) of HBBPU were demonstrated at different wavelengths and different temperatures by the ATR technique. By using CCD digital imaging devices, transmission loss of the internal waveguide was measured. The refractive index dispersions and Sellmeyer coefficients of HBBPU were obtained by the Sellmeyer equation. A Y-branched switch based on the thermo-optic effect was proposed and the performance of the switch was simulated. With a branching angle of 0.143° and the FD-BPM method, the result showed that the power consumption of the thermo-optic switch could be only 3.6 mW, and the response time of the switch could reach about 8 ms. This is a significant improvement in reducing power consumption compared with the normal Y-branched polymer thermo-optic switch.     

绿色合成CdSe及制备CdSe-聚氨酯纳米复合发光材料

通过一步法绿色合成了CdSe-聚氨酯(CdSe-PU)纳米复合发光材料.在N2保护下,将单质硒(Se)溶于蓖麻油,以蓖麻油酸作为氧化镉(CdO)的配体,合成硒化镉(CdSe)纳米晶.将聚丙二醇2000和异佛尔酮二异氰酸酯(IPDI)合成的预聚体,加入含CdSe纳米晶的蓖麻油溶液,通过交联作用得到CdSe-PU纳米复合发光材料.采用紫外-可见分光光度计(UV-Vis)、荧光光谱仪(PL)、傅里叶红外光谱仪(FT-IR)、热重分析仪(TGA)、透射电子显微镜(TEM)对CdSe纳米晶和聚氨酯复合材料的结构和性能进行了表征.结果表明:此方法合成的CdSe纳米晶性能良好,能在聚氨酯纳米复合材料中均匀分散且性能稳定,CdSe-PU纳米复合材料耐热性有所提高.     

Synthesis and properties of near IR induced self-healable polyurethane/graphene nanocomposites

A series of self-healable polyurethane (SHPU)/modified graphene (MG) nanocomposites were synthesized from poly(tetramethylene glycol) (PTMG) and 4,4′-methylene diphenyl diisocyanate (MDI) with minute amounts (0–1 wt%) of MG which was chemically modified graphene oxide (GO) with phenyl isocyanate and reduced in the presence of phenylhydrazine.