新型Co（Ⅲ）配合物（CoL3）的合成及其晶体结构

以3,5-二溴水杨醛缩甲胺希夫碱(HL)为定向配体,硝酸钴为金属离子源,采用溶剂热法在乙腈中合成了一个新型的单核钴(Ⅲ)配合物(Co L3,1),其结构经IR和X-射线单晶衍射表征。1属单斜晶系,空间群P21/n,晶胞参数a=13.833 2(4),b=20.558 2(8),c=20.691 7(7),β=100.622(3)°,V=5 783.6(3)3,Z=8,Dc=2.147 g·cm-3,R1=0.045,wR2=0.092,S=1.02。1中Co(Ⅲ)分别与三个二齿配体上的三个O原子和三个N原子配位,形成轻度扭曲的八面体构型。分子间通过C-H┈Br和Br┈Br弱作用相互连接成三维网络结构。     

热抽取法测定钴块中氢含量

研究了钴块中氢含量的测定方法。采用石英坩埚加载样品,热抽取法进行测定。不加任何助熔剂,分析功率为100%,匹配的分析时间为110 s,比较水平设定为0.1%。在选定的参数下,样品能在完全熔融状态下释放出全部氢。方法加标回收率为80%~119%,测定结果的相对标准偏差小于15%(n=6),检出限为0.5μg/g。热抽取法的精密度优于熔融法的精密度,满足微量气体分析的要求。     

Catalytic Synthesis of 8-Membered Ring Compounds via Cobalt(III)-Carbene Radicals

The metalloradical activation of o-aryl aldehydes with tosylhydrazide and a cobalt(II) porphyrin catalyst produces cobalt(III)-carbene radical intermediates, providing a new and powerful strategy for the synthesis of medium-sized ring structures. Herein we make use of the intrinsic radical-type reactivity of cobalt(III)-carbene radical intermediates in the [Co^II(TPP)]-catalyzed (TPP=tetraphenylporphyrin) synthesis of two types of 8-membered ring compounds; novel dibenzocyclooctenes and unprecedented monobenzocyclooctadienes. The method was successfully applied to afford a variety of 8-membered ring compounds in good yields and with excellent substituent tolerance. Density functional theory (DFT) calculations and experimental results suggest that the reactions proceed via hydrogen atom transfer from the bis-allylic/benzallylic C−H bond to the carbene radical, followed by two divergent processes for ring-closure to the two different types of 8-membered ring products. While the dibenzocyclooctenes are most likely formed by dissociation of o-quinodimethanes (o-QDMs) which undergo a non-catalyzed 8π-cyclization, DFT calculations suggest that ring-closure to the monobenzocyclooctadienes involves a radical-rebound step in the coordination sphere of cobalt. The latter mechanism implies that unprecedented enantioselective ring-closure reactions to chiral monobenzocyclooctadienes should be possible, as was confirmed for reactions mediated by a chiral cobalt-porphyrin catalyst.     

A Hydrogen-Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low-cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble-metal co-catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so-called L-NiCo nanosheets with a nonstoichiometric composition and O²⁻/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O²⁻ and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h⁻¹ under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.     

Water-Soluble Polymers with Appending Porphyrins as Bioinspired Catalysts for the Hydrogen Evolution Reaction

Molecular design to improve catalyst performance is significant but challenging. In enzymes, residue groups that are close to reaction centers play critical roles in regulating activities. Using this bioinspired strategy, three water-soluble polymers were designed with appending Co porphyrins and different side-chain groups to mimic enzyme reaction centers and activity-controlling residue groups, respectively. With these polymers, high hydrogen evolution efficiency was achieved in neutral aqueous media for electro- (turnover frequency >2.3×10⁴ s⁻¹) and photocatalysis (turnover number >2.7×10⁴). Porphyrin units are surrounded and protected by polymer chains, and more importantly, the activity can be tuned with different side-chain groups. Therefore, instead of revising molecular structures that is difficult from both design and synthesis points of view, polymers can be used to improve molecular solubility and stability and simultaneously regulate activity by using side-chain groups.     

Sulfur-Modified Oxygen Vacancies in Iron–Cobalt Oxide Nanosheets: Enabling Extremely High Activity of the Oxygen Evolution Reaction to Achieve the Industrial Water Splitting Benchmark

The oxygen vacancies of defective iron–cobalt oxide (FeCoO_x-Vo) nanosheets are modified by the homogeneously distributed sulfur (S) atoms. S atoms can not only effectively stabilize oxygen vacancies (Vo), but also form the Co−S coordination with Co active site in the Vo, which can modulate the electronic structure of the active site, enabling FeCoO_x-Vo-S to exhibit much superior OER activity. FeCoO_x-Vo-S exhibits a mass activity of 2440.0 A g⁻¹ at 1.5 V vs. RHE in 1.0 m KOH, 25.4 times higher than that of RuO₂. The Tafel slope is as low as 21.0 mV dec⁻¹, indicative of its excellent charge transfer rate. When FeCoO_x-Vo-S (anode catalyst) is paired with the defective CoP₃/Ni₂P (cathode catalyst) for overall water splitting, current densities of as high as 249.0 mA cm⁻² and 406.0 mA cm⁻² at a cell voltage of 2.0 V and 2.3 V, respectively, can be achieved.     

双金属氮化物Co3W3N/CNTs纳米复合材料的制备及其室温常压氮还原性能

采用水热法并经氨气保护热处理制备了双过渡金属氮化物Co3W3N/CNTs复合材料,得到了价格低廉且拥有良好氮电化学还原性能(NRR)的催化剂。通过调节已经预氧化的CNTs与过渡金属氮化物前驱体CoWO4的比例以及氨气热处理温度,实现了Co3W3N在CNTs表面的均匀负载。扫描电子显微镜(SEM)及透射电子显微镜(TEM)测试结果显示该电化学活性纳米微粒均匀地分散于CNTs表面,表明经预氧化的CNTs由于表面富集了较多的活性基团,有利于双过渡金属氮化物的分散生长。热处理后CNTs表面的Co3W3N微粒尺寸约为20 nm,相较于无载体的Co3W3N尺寸(100 nm)有明显减小。室温条件下,在N2饱和的0.01 mol·L^-1 H2SO4溶液中测试了该纳米复合材料在不同过电位下的NRR,该材料在-0.3 V(vs RHE)时的产氨率及法拉第效率分别可达12.73μg·h^-1·cm-2和13.59%,对比同样条件下,纯相Co3W3N的产氨率及法拉第效率仅为1.08μg·h^-1·cm^-2和1.76%。结果表明,通过水热反应和氨气保护热处理的Co3W3N/CNTs纳米复合材料具有良好的NRR性能。     

电感耦合等离子体质谱法同时测定地质样品中镉、锗、钴

建立电感耦合等离子体质谱法同时测定地质样品中镉、锗、钴含量的分析方法。样品用氢氟酸-硝酸混合溶液加热溶解,然后加热浓缩驱酸,再用硝酸溶液(1+1)复溶提取,在选定的仪器工作条件下进行测定。镉、锗、钴的含量分别在0.00~0.10,0.00~5.00,0.00~50.00 μg/g范围内与质谱峰强度呈良好的线性关系,相关系数均大于0.999,方法检出限分别为0.01,0.02,0.02 μg/g。用该方法对国家一级标准物质进行测定,测定值的相对误差均小于10%,测定结果的相对标准偏差为0.79%~8.45%(n=12)。该方法样品处理过程简便,检测效率高,适用于批量地质样品中镉、锗、钴的测定。     

Selective Acceptorless Dehydrogenation of Primary Amines to Imines by Core–Shell Cobalt Nanoparticles

Core–shell nanocatalysts are attractive due to their versatility and stability. Here, we describe cobalt nanoparticles encapsulated within graphitic shells prepared via the pyrolysis of a cationic poly‐ionic liquid (PIL) with a cobalt(II) chloride anion. The resulting material has a core–shell structure that displays excellent activity and selectivity in the self‐dehydrogenation and hetero‐dehydrogenation of primary amines to their corresponding imines. Furthermore, the catalyst exhibits excellent activity in the synthesis of secondary imines from substrates with various reducible functional groups (C=C, C≡C and C≡N) and amino acid derivatives.     

Electroreductive Cobalt‐Catalyzed Carboxylation: Cross‐Electrophile Electrocoupling with Atmospheric CO2

The chemical use of CO₂ as an inexpensive, nontoxic C1 synthon is of utmost topical interest in the context of carbon capture and utilization (CCU). We present the merger of cobalt catalysis and electrochemical synthesis for mild catalytic carboxylations of allylic chlorides with CO₂. Styrylacetic acid derivatives were obtained with moderate to good yields and good functional group tolerance. The thus‐obtained products are useful as versatile synthons of γ‐arylbutyrolactones. Cyclic voltammetry and in operando kinetic analysis were performed to provide mechanistic insights into the electrocatalytic carboxylation with CO₂.