Cellulose-polyamide 66 blends. Part II: Mechanical behavior

Blends of the natural polymer cellulose with a synthetic polymer, polyamide 66, are studied in order to determine if the expected strong interaction between them, due to hydrogen bonds, could improve their mechanical properties such as strength and elongation at break. In a previous work {Part I, J. Polym. Sci. Polym. Phys., 32 , 1437 (1994)}, the preparation technique and the characterization of cellulose-polyamide 66 (PA66) blends were described in detail. Several samples in the composition range between 0 to 70 wt % of PA66 were carefully dried and examined using dynamic mechanical and tensile tests. Based on previous work a new percolation model has been developed. It takes both linear and nonlinear mechanical behaviors into account and allows for the effect of adhesion between material domains. From comparison between experimental and predicted data, it is concluded that a partial miscibility between the amorphous phases of cellulose and PA66 exists and is responsible for a strong adhesion at their interface. Solid-state ¹³C nuclear magnetic resonance has also been used to study these samples and supports the existence of strong interactions between both homopolymers. © 1995 John Wiley & Sons, Inc.     

Predicting the Mechanical Properties of Binary Blends of Immiscible Polymers

We couple a morphological study of an immiscible binary AB mixture with a micromechanical simulation to determine how the spatial distribution of the A and B domains and the interfacial region (interphase) affects the mechanical behavior of the blend. The morphological studies are conducted through a three-dimensional Cahn-Hilliard (CH) simulation. Through the CH calculations, we obtain the size and structure of the domains for different blend compositions. The output of the CH model serves as the input to the Lattice Spring Model (LSM), which consists of a three-dimensional network of springs. In particular, the location of the different phases is mapped onto the LSM lattice and the appropriate force constants are assigned to the LSM sites. A stress is applied to the LSM lattice and we calculate the elastic response of the material. We find that the local stress and strain fields are highly dependent on the morphology of the system. By integrating the morphological and mechanical models, we can isolate how modifications in the composition of the mixture affect the macroscopic behavior. Thus, we can establish how choices made in the components affect the ultimate performance of the material.     

Structural morphology of poly(styrene)-poly(butyl acrylate) polymer-polymer composites studied by dynamic mechanical measurements

The emulsion polymerization process allows production of polymer particles with different structural morphologies. Films obtained after coalescence keep some memory of this morphology, but large modifications can occur during coalescence. In the present case, one of the polymers, polystyrene (PS), exhibits a glass temperature (Tg) much higher than the filmification temperature (close to room temperature), while the other one, poly(butyl acrylate) (PBA), has a much lowerTg. Furthermore, it is well known that dynamic mechanical measurements can be very helpful in providing information on the morphology of polymer materials, i.e., on geometrical and topological arrangement of homopolymer domains. At first, this method was used for comparison of two types of films: i) the first one obtained from structured-core (PS)-shell (PBA) particles, ii) the second one obtained from a blend of homopolymer particles (PS and PBA). It appears that the expected core-shell particles lost their geometric structure in the second film. Second, comparison of the predicted dynamic modulus and experimental data shows that i) strong interactions exist between PS nodules unless their coalescence has occured, leading to an abnormally high modulus at room temperature, ii) after achieving their coalescence, PS forms a more or less continuous phase. Both phenomena strongly depend on the particle size and their respective volume fractions.     

10.1007/s10955-006-9040-z

We derive hydrodynamic equations describing the evolution of a binary fluid segregated into two regions, each rich in one species,which are separated (on the macroscopic scale) by a sharp interface. Our starting point is a Vlasov-Boltzmann (VB) equation describing the evolution of the one particle position and velocity distributions, f_i (x, v, t), i = 1, 2. The solution of the VB equation is developed in a Hilbert expansion appropriate for this system. This yields incompressible Navier-Stokes equations for the velocity field u and a jump boundary condition for the pressure across the interface. The interface, in turn, moves with a velocity given by the normal component of u.     

Tracing of interference fringes using average gray value and simultaneous row and column scan

An algorithm for computer tracing of interference fringes is reported. The method uses the average gray-level value for thresholding, row and column scans for determining the type of the scan and simultaneous row and column scan for tracing. The proposed method yield good result even for low-contrast and high-noise images. The program for the interferogram tracing was written using MATLAB6.     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Slow crack growth in blends of HDPE and model copolymers

The resistance to slow crack growth (SCG) was measured in binary blends of high density polyethylene (HDPE) and 5–10% concentrations of model ethylene-butene random copolymers by measuring the time to failure (t_f) under a constant stress intensity. An increase of t_f with the addition of the copolymer if the copolymer could crystallize and the increase was greater the higher branch density. The copolymer with 117 branches/1000C could not crystallize and therefore its blend had a t_f that was less than that of the HDPE. The fracture energies of the blends as determined by their resistance to SCG were compared with the energy by rapid fracture, J_c, as previously measured by Rhee and Crist. It is concluded that SCG is more sensitive to variations in the microstructure than is rapid fracture and that the differences in SCG behavior can be qualitatively explained in terms of the differences in microstructure of the blends. ©1995 John Wiley & Sons, Inc.     

核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

Degradable polymer blends. I. Screening of miscible polymers

Blends of biodegradable polymers having properties distinct from the individual polymer components, and that are suitable for use as carriers of pharmaceutically active agents, were prepared from two or more polyanhydrides, polyesters, and mixtures of polyanhydrides and low molecular weight polyesters. The blends have different properties than the original polymers, providing a mean for altering the characteristics of the polymeric matrix without altering the chemical structure of the component polymers. Aliphatic, aromatic, and copolymers of polyanhydrides were miscible in each other and formed less crystalline compositions with a single melting point which was lower than the melting point of the starting polymers. The polyesters: poly(lactide-glycolide), poly(caprolactone), and poly(hydroxybutyric acid) presented some miscibility in each other. However, the polyanhydrides were immiscible with the polyesters resulting in a complete phase separation both in solution or in melt mixing. Only low molecular weight polyesters (in the range of 2000) of lactide and glycolide, mandelic acid, propylenefumarate, and caprolactone presented some miscibility with polyanhydrides. Similarly, poly(orthoester) and hydroxybutyric acid polymers formed a uniform mixture with the anhydride polymers which had the two melting points of the original polymers. Drug release from polymer blends composed of poly(hydroxybutyric acid) or low molecular weight poly(lactic acid) with poly(sebacic anhydride) (PSA) showed a constant release of drug for periods from 2 weeks to several months as a function of the PSA content in the blend. Increasing the content of PSA, a fast degrading polymer, increases the release rate from the blend. © 1993 John Wiley & Sons, Inc.