Volumetric properties of the water + ethylenediamine mixture at atmospheric pressure from 288.15 to 353.15 K

Densities of the water + ethylenediamine binary system were measured at atmospheric pressure over the whole range of compositions at temperatures from 288.15 to 353.15 K using an Anton Paar digital vibrating glass tube densimeter. Density increases with water content. The experimental excess molar volume data have been correlated with the Redlich-Kister equation, and partial molar volumes calculated at infinite dilution for each component.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Glass transition study of blends of poly(N-methyldodecano-12-lactam) with poly(styrene-co-acrylic acid)

The blends of poly(N-methyldodecano-12-lactam) (MPA) with poly(styrene-co-acrylic acid) (PSAA) prepared from dioxane solutions were studied by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The experimental DSC data of glass transition temperature T_g as a function of composition of amorphous phase were fitted for the as-prepared and re-scanned samples using theoretical approaches. The as-prepared blends show monotonic single-T_g dependence. The values of the Gordon-Taylor coefficient not far from unity suggest miscibility of the blend system in amorphous phase in the whole concentration range. As documented by FTIR, this miscibility is associated with hydrogen bonds between COOH groups of the acrylic acid units in PSAA molecules acting as the H-bond donor and CO groups of MPA acting as the H-bond acceptor. The T_g-dependencies obtained form the second runs have a profound sigmoid character. The Schneider treatment induced an idea of partial limited miscibility in the MPA/PSAA blends caused by prevalence of homogeneous contacts. The difference in T_g between the first and second run can partly be attributed to higher crystallinities in the former.     

Non-isothermal crystallization kinetics of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends

The glass-transition temperature and non-isothermal crystallization of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) (PTT/PEN) blends were investigated by using differential scanning calorimeter (DSC). The results suggested that the binary blends showed different crystallization and melting behaviors due to their different component of PTT and PEN. All of the samples exhibited a single glass-transition temperature, indicating that the component PTT and PEN were miscible in amorphous phase. The value of T_g predicted well by Gordon-Taylor equation decreased gradually with increasing of PTT content. The commonly used Avrami equation modified by Jeziorny, Ozawa theory and the method developed by Mo were used, respectively, to fit the primary stage of non-isothermal crystallization. The kinetic parameters suggested that the PTT content improved the crystallization of PEN in the binary blend. The crystallization growth dimension, crystallization rate and the degree of crystallinity of the blends were increased with the increasing content of PTT. The effective activation energy calculated by the advanced iso-conversional method developed by Vyazovkin also concluded that the value of E_a depended not only on the system but also on temperature, that is, the binary blend with more PTT component had higher crystallization ability and the crystallization ability is increased with increasing temperature. The kinetic parameters U^* and K_g were also determined, respectively, by the Hoffman-Lauritzen theory.     

Enhanced thermal properties and flame retardancy from a thermosetting blend of a phosphorus‐containing bismaleimide and epoxy resins

Epoxy resins modified by an organosoluble phosphorus‐containing bismaleimide (3,3′‐bis(maleimidophenyl) ­phenylphosphine oxide; BMPPPO) were prepared by simultaneously curing epoxy/diaminodiphenylmethane (DDM), and BMPPPO. The resulted epoxy resins were found to exhibit glass transition temperatures as high as 212 °C, thermal stability at temperatures over 350 °C, and excellent flame retardancy with Limited oxygen index (LOI) values around 40. Incorporation of BMPPPO into epoxy resins via the thermosetting blend was demonstrated to be an effective way to enhance the thermal properties and flame retardancy simultaneously. Copyright © 2003 John Wiley & Sons, Ltd.     

Blends of starch with ethylene vinyl alcohol copolymers: effect of water,glycerol, and amino acids as plasticizers

Blends of thermoplastic starch with poly(ethylene‐co‐vinyl alcohol) copolymer (EVOH) were melt extruded with water/glycerol as plasticizer and a series of amino acid additives. The biggest factor in end‐use mechanical properties proved to be the relative humidity (RH) during storage. Plasticized starch‐EVOH blends stored at 0 and 50% RH changed significantly over time, with, for example, the tensile strength (TS) of the glycerol‐plasticized blend increasing from 4.7 to 26.3 MPa over 8 weeks when maintained at 0% RH. In contrast, the TS of this same sample stored at 75% RH remained unchanged for 8 weeks. Amino acids provided relatively minor, but significant changes in mechanical properties with time. Based on TS, elongation‐to‐break, and modulus, it may be concluded that β‐alanine, sarcosine, and L ‐proline were more effective than glycerol at maintaining strong flexible blends. Increases in crystallinity and changes in morphology with time, as described by modulated DSC were correlated to these changes in mechanical properties. Published in 2007 by John Wiley & Sons, Ltd.     

Compatibility mechanisms between EVA and complex impact heterophasic PP-EPx copolymers as a function of EP content

Compatibility mechanisms between EVA and complex heterophasic iPP-EPx copolymers have been studied as a function of EP content. Systematic studies were made in order to characterize the thermal, morphological and mechanical behavior, before and after blending a series of PP-EPx/EVA concentrations. Multiple melting, proportional to the EP content, was observed for the neat copolymers and an explanation was given for its evolution in terms of rejection-like secondary crystallization. After blending with EVA, the generation of a single T_g was taken as an indication of compatibility between both polymers. A morphological transition toward compatibility was first determined at 20 wt.% EVA which was in correlation with a morphological change from isolated spherical domains to interconnected voids. A second morphological transition from interconnected voids to fibrous crystals was observed above 40 wt.% EVA. This last transition marked the beginning of compatibility. Overall, the evolution of blends was explained in terms of the nature of the complex heterophasic copolymers. Tensile mechanical studies were also consistent with morphological changes. Increases in the x content in EPx and in EVA concentration worked in favor of impact resistance.     

Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples

Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclophosphazene (CP-2EPOX).The blends were prepared by using polyamide 6 (PA6) and polyamide 6,6 (PA66) in 25/75 and 75/25 w/w compositions by using a co-rotating twin-screw extruder.The materials have been completely characterized from a mechanical, rheological, and morphological point of view. The results indicate that the additives used cause an increase of the rupture properties and of the viscosity, especially in the PA6 rich blends containing CP-2EPOX. This result can be not only attributed to a chain extension effect on the PA phase but also to in situ formation of PA/PBT copolymers promoted by the presence of the CP compound as confirmed by NMR and MALDI-TOF analyses. The compatibilization effect fades in blends containing PA66, probably due to a thermal deactivation of the additives at higher temperature required to process this polymer.     

Electrochemical study of 18-crown-6-Tl+ complexes in binary solvent mixtures

Summary The formation constants,K _S, of the 18-crown-6 complex with thallium(I) ion were studied by polarographic measurements in binary mixtures of acetonitrile, acetone, tetrahydrofuran, and dimethylsulfoxide with water, as a function of the solvent mole fraction. In all the cases, the variation of the stability constant can be described by the empirical relation logK _S=a[(–1)/(2+1)]+b where stands for relative permittivity of a given mixture anda andb mark the regression coefficients. The values ofa calculated for four series of binary mixtures showed correlation with the Gutmann donor numbers of the neat organic solvents which form the mixture.On leave from the Department of Chemistry, Jingzhou Teacher's College, Jingzhou, Hubei, China     

聚联苯酰亚胺/聚硫醚酰亚胺共混体系的相容性

<正> 聚酰亚胺是一种性能极其优异的高性能树脂,它在许多高技术领域有着极其重要的应用价值。在80年代以前,人们工作的重点是合成出一系列分子结构不同的聚酰亚胺,研究分子结构与性能间的关系,开发聚酰亚胺新品种。自80年代后期,有关高性能树脂聚酰亚胺共混物的研究日益引起人们的关注,其中有关不同分子结构的聚酰亚胺/聚酰亚胺共