A New Family of Binary Layered Compounds of Platinum with Alkali Metals (A = K,Rb, Cs)

By reacting platinum with alkali metals (A = K, Rb, Cs) a new family of binary alkali metal platinides has been synthesized and characterized by chemical analysis, X‐ray powder diffraction, thermal analysis (DTA and DSC), and magnetic measurements. All three compounds exhibit similar XRD‐patterns with strong reflections that can be indexed on the basis of a rhombohedral crystal system (K_xPt: a = 2.6462(1), c = 17.123(1); Rb_xPt: a = 2.6415(1) Å, c = 17.871(1) Å; Cs_xPt: a = 2.6505(1) Å, c = 18.536(1) Å; x < ½. The a lattice constant is independent on the alkali metal used and of value close to the Pt–Pt distance in NaPt₂ (2.645Å). The c parameter increases monotonically with the growing atomic radius of the alkali metal. The average structure of the alloys consists of cubic close packed layers of platinum atoms with layers of disordered alkali metals in between. For all compounds besides the strong reflections small satellites are observed which cannot be indexed together with the rhombohedral peaks in any rational 3‐dimensional lattice. However, these satellites can be indexed as incommensurate modulations within the ab plane (found propagation vectors k = (0.1011, 0.2506, 0) for Cs_xPt, and k = (0.0168, 0.2785, 0) for Rb_xPt).     

Equilibrium Studies of Binary and Ternary Complexes Involving Tricine and Some Selected α-Amino Acids

Summary. The formation equilibria for the binary complexes of Co^II, Ni^II, Cu^II, Zn^II, Cd^II, Mn^II, Pb^II, Th^IV, UO₂^II, and Ce^III with tricine and for the ternary complexes involving some -amino acids (glycine, -alanine, proline, serine, asparagine, and aspartic acid) were investigated using pH-metric technique. The formation of binary and ternary complexes was inferred from the pH-metric titration curves. It was deduced that tricine acts as a primary ligand in the ternary complexes involving the monocarboxylic amino acids (glycine, -alanine, proline, serine, and asparagine), whereas it behaves as a secondary ligand in the ternary systems containing the dicarboxylic aspartic acid. The ternary complex formation was found to take place in a stepwise manner. The stability constants of the complexes formed in aqueous solutions were determined potentiometrically under the experimental conditions (t=25°C, I=0.1moldm^–3 NaNO₃). The order of stability of the ternary complexes in terms of the nature of the amino acids is investigated and discussed. The values of log K for the ternary complexes have been evaluated and discussed. Evaluation of the effects of ionic strength and temperature of the medium on the stability of the ternary system M^II-tricine--alanine (M^II=Co^II, Ni^II, and Cu^II) has been studied. The thermodynamic parameters were calculated and discussed.     

Structural and physical properties of Mg3−xZnxSb2 (x=0-1.34)

The Mg_3−xZn_xSb₂ phases with x=0-1.34 were prepared by direct reactions of the elements in tantalum tubes. According to the X-ray single crystal and powder diffraction, the Mg_3−xZn_xSb₂ phases crystallize in the same P3¯m1 space group as the parent Mg₃Sb₂ phase. The Mg_3−xZn_xSb₂ structure is different from the other substituted structures of Mg₃Sb₂, such as (Ca, Sr, Ba) Mg₂Sb₂ or Mg_5.23Sm_0.77Sb₄, in a way that in Mg_3−xZn_xSb₂ the Mg atoms on the tetrahedral sites are replaced, while in the other structures Mg on the octahedral sites is replaced. Thermoelectric performance for the two members of the series, Mg₃Sb₂ and Mg_2.36Zn_0.64Sb₂, was evaluated from low to room temperatures through resistivity, Seebeck coefficient and thermal conductivity measurements. In contrast to Mg₃Sb₂ which is a semiconductor, Mg_2.36Zn_0.64Sb₂ is metallic and exhibits an 18-times larger dimensionless figure-of-merit, ZT, at room temperature. However, thermoelectric performance of Mg_2.36Zn_0.64Sb₂ is still poor and it is mostly due to its large electrical resistivity.     

Condensed rare-earth metal-rich tellurides. Extension of layered Sc6PdTe2-type compounds to yttrium and lutetium analogues and to Y7Te2, the limiting binary member

Six isotypic R₆ZTe₂ phases have been synthesized in Ta at elevated temperatures and characterized by single crystal X-ray refinements for R=Y, Z=Rh, Pd, Ag, Y and for R=Lu, Z=Cu, Ag. All crystallize in the Sc₆PdTe₂-type structure, Pnma, Z=4, a∼21.5 Å, b∼4.1 Å, c∼11.4 Å. The results can be viewed as the replacement of Te3 atoms in the parent isotypic Sc₂Te (or in the hypothetical Y₂Te or Lu₂Te analogues) by the above the Z, the Y example giving the new binary phase Y₇Te₂. The shorter (and stronger) metal-metal bonds concentrate in the region of metal (Z, Y) substitution, as revealed by larger integrated crystal orbital Hamilton population (ICOHP) values derived from linear muffin-tin-orbital (LMTO) calculations. Partial densities-of-states data for Y₇Te₂ reflect a similar behavior. Individual R-R bond distances are seen to deviate appreciably from the more fundamental overlap population measures for each.     

在线标准加入火焰原子吸收光谱法测定钮扣电池中铅和镉

应用火焰原子吸收光谱(FAAS)法测定了钮扣电池中铅和镉的含量,对测定条件作了较详细的研究。用在线双毛细管标准加入法消除了基体的干扰。按所述方法测定电池样品中铅和镉,测定结果的RSD依次为3.58%和5.87%,铅和镉的浓度水平分别为5.4×10-3%和2.3×10-4%(质量分数),回收率结果为93.0%~100.1%(铅)和95.0%~101.0%(镉)。     

Fast determination of evaporation enthalpies of solvents and binary mixtures using a microsilicon chip device with integrated thin film transducers

A silicon chip device with two types of integrated platinum thin film resistors was applied for microcaloric measurements. It was shown that the device is capable of fast characterization of liquid evaporation behaviour and allows the determination of evaporation enthalpies for pure liquids and mixtures. The applicability was demonstrated for a wide range of solvents from nonpolar aliphatic solvents over polar organics to protic solvents (e.g. iso-octane, toluene, acetone, ethanol, methanol and water). The sample volumes were in the range of about 2-5 μL. The determination of transient times, in case of constant power mode, or the power integral over time was used for the fast estimation of binary liquid mixtures. Thermo-resistive measurements of 5 μL droplets of solvent mixtures like methanol/iso-propanol, ethanol/water, iso-octane/iso-propanol and iso-octane/1,4-dioxane showed significant changes in temperature characteristics and evaporation enthalpies in dependence on composition. The applied heating power was about 1 W, which corresponds to measurement times between a few seconds and a minute.     

Bestimmung der Aktivitätskoeffizienten im chromatographischen Modell „binärer Lösungen“

An explanation is given for the two possible ways of determination of the activity coefficients of solutes, when applying a new thermodynamic model of adsorption and partition chromatography, i. e. the binary solutions model.

     

SINGLE AND BINARY ADSORPTION PERFORMANCE OF SALICYLIC ACID AND 5-SULFOSALICYLIC ACID ONTO HYPERCROSSLINKED POLYMERIC ADSORBENTS

Single and binary adsorption behaviors of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents, i.e. NDA-101 and NDA-99 were investigated. The Freundlich model can successfully describe all the adsorption isotherms tested, which indicates a favorable and exothermic adsorption process. The adsorption of salicylic acid relies on π-π interaction, while the electrostatic interaction further influences the adsorption of 5-sulfosalicylic acid onto NDA-99. The adsorptive capacity of salicylic acid on NDA-99 decreases but increases on NDA-101 with 5-sulfosalicylic acid as the background component in a binary solute system. The amount of 5-sulfosalicylic acid adsorbed was decreased with the increase in initial concentration of salicylic acid on both adsorbents. The competition for the adsorption sites is considered to be predominant in the solid-to-liquid interaction process. The adsorption selectivity of salicylic acid onto NDA-101 is higher than onto NDA-99 by more than an order of magnitude. Thus, combination technique involving NDA-101 followed by NDA-99 can be effectively applied to separate and recover salicylic acid and 5-sulfosalicylic acid from wastewater.     

Virial expansion for a polymer with a realistic pair-potential interaction

No modern theory of polymer excluded volume adequately describes the crossover from poor solvent to good solvent conditions; a fundamental difficulty is a singularity in the binary cluster integral. Mayer expansion techniques are applied to a model with a pair interaction between monomers to clarify the distinction between geometric and solvent contributions to excluded volume. Detailed calculations are undertaken for a hard-core potential and a mimic Lennard-Jones potential. The significance of the singularity in the binary cluster integral for calculations in the crossover regime is discussed.     

弱碱性和强碱性阴离子交换树脂的离子交换平衡的比较SO_4~(2-)-Cl~--NO_3~-体系

本文详细地比较了在弱碱性和强碱性阴离子交换树脂上,SO_4~(2-)-Cl~-、NO_3~--Cl~-及NO_3~--SO_4~(2-)二元交换的等温线和修正选择系数。实验测定及理论计算了上述三种二元交换反应的标准自由能的改变量。测得了在弱碱性树脂上的SO_4~(2-)-Cl~--NO_3~-三元交换的等温线。适用于强酸性和强碱性树脂的从二元交换平衡数据推算三元交换平衡数据的方法推广应用于弱碱性树脂。