THE COUPLING OF NATURAL BOUNDARY ELEMENT AND FINITE ELEMENT METHOD FOR 2D HYPERBOLIC EQUATIONS

In this paper, we investigate the coupling of natural boundary element and finite element methods of exterior initial boundary value problems for hyperbolic equations. The governing equation is first discretized in time, leading to a time-step scheme, where an exterior elliptic problem has to be solved in each time step. Second, a circular artificial boundary FR consisting of a circle of radius R is introduced, the original problem in an unbounded domain is transformed into the nonlocal boundary value problem in abounded subdomain. And the natural integral equation and the Poisson integral formula are obtained in the infinite domainΩ2 outside circle of radius R. The coupled variational formulation is given. Only the function itself, not its normal derivative at artificial boundary ΓR, appears in the variational equation, so that the unknown numbers are reducedand the boundary element stiffness matrix has a few different elements. Such a coupled method is superior to the one based on direct boundary element method. This paper discusses finite element discretization for variational problem and its corresponding numerical technique, and the convergence for the numerical solutions. Finally, the numerical example is presented to illustrate feasibility and efficiency of this method.     

Effect of genesis on the properties and hydrogen reducibility of NiO-ZnO mixed oxides

The physico-chemical properties and reactivity tested by hydrogen reduction have been studied for two series of NiO-ZnO mixed oxides of various composition. The solid nickel oxide or zinc oxide in interaction with the solution of nitrate of the second component were used as the precursors in each series. The differences in some physico-chemical parameters of the samples in both series were correlated with their reduction behaviour, followed both in iso- and non-isothermal regime. Moreower, the influence of various factors modifying the reactivity of mixed oxides was also investigated and the results were compared with those obtained from earlier studied analogous systems of quite different origin.This revised version was published online in November 2005 with corrections to the Cover Date.     

Testing for additivity with B-splines

Regression splines are often used for fitting nonparametric functions, and they work especially well for additivity models. In this paper, we consider two simple tests of additivity: an adaptation of Tukey's one degree of freedom test and a nonparametric version of Rao's score test. While the Tukey-type test can detect most forms of the local non-additivity at the parametric rate of O(n-1/2), the score test is consistent for all alternative at a nonparametric rate. The asymptotic distribution of these test statistics is derived under both the null and local alternative hypotheses. A simulation study is conducted to compare their finite-sample performances with some existing kernel-based tests. The score test is found to have a good overall performance.     

On the phase space approach to complexity

We elaborate in some detail on a new phase space approach to complexity, due to Y.-C. Zhang. We show in particular that the connection between maximal complexity and power law noise or correlations can be derived from a simple variational principle. For a 1D signal we find 1/f noise, in accordance with Zhang.     

Cyclic reduction and FACR methods for piecewise hermite bicubic orthogonal spline collocation

Cyclic reduction and Fourier analysis-cyclic reduction (FACR) methods are presented for the solution of the linear systems which arise when orthogonal spline collocation with piecewise Hermite bicubics is applied to boundary value problems for certain separable partial differential equations on a rectangle. On anN×N uniform partition, the cyclic reduction and Fourier analysis-cyclic reduction methods requireO(N ²log₂ N) andO(N ²log₂log₂ N) arithmetic operations, respectively.     

Inhibition of the reduction of Cr(VI) at the magnetite–water interface by calcium carbonate coatings

The effect of calcium carbonate coatings on the reduction of aqueous chromate on the magnetite(1 1 1) surface has been investigated using a combination of synchrotron based X-ray photoemission spectroscopy (PES) and X-ray absorption near edge structure (XANES) spectroscopy, along with laboratory-based powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). CaCO₃ coatings (dominantly calcite with minor quantities of aragonite and vaterite) of thicknesses ranging from 10 Å to 20 m were grown on magnetite(1 1 1) surfaces by exposure to supersaturated aqueous solutions followed by evaporation of the solution—a process that mimics pore-water evaporation in vadose zones leading to the formation of caliche and calcium carbonate coatings on mineral grains. Coating thicknesses were determined from attenuation of the Fe 2p photoemission signal by the carbonate coating. For coatings less than 15 Å thick, Cr 2p photoemission and Cr L_II, L_III-edge XANES spectra show that chromate is reduced by the underlying magnetite surface; however, as the minimum coating thickness increases beyond 15 Å, the magnetite surface becomes passivated and further chromate reduction ceases. Our findings suggest that carbonate coatings on natural magnetite grains can significantly reduce or eliminate their ability to reduce Cr(VI), which is a toxic and highly mobile environmental contaminant.     

Nanometric Antimony Powder Synthesis by Activated Alkaline Hydride Reduction of Antimony Pentachloride

A novel chemical reduction method using an activated alkaline hydride (LiH or NaH-t-BuONa) in tetrahydrofuran solvent has been applied to antimony salt reduction. X-ray diffraction and transmission electron microscopy studies have been carried out to characterize the morphology and structure of the materials. Alkali hydride nature influence has been proved. In both cases the process allows to prepare antimony particles in nanometer range from few nanometers to about 20nm which could be used as anodic materials for lithium–ion batteries. With lithium hydride well-crystallized particles inclined to agglomeration were observed whereas finely dispersed amorphous particles were pointing out after activated sodium hydride reduction.     

Roughness reduction in submicron waveguides by low-molecular weight development

Roughness reduction of a submicron waveguide profile in chemically amplified negative resist is here performed by proper selection of an alkali-based developer, taking into account that its smaller molecules lead to smoother resist surface by altering the developing mechanism of aggregate extraction performed with standard quaternary ammonium hydroxide. Roughness is then analyzed by means of classical Atomic Force Microscope inspection; furthermore, a non-invasive line edge roughness analysis approach based on top-down scanning electron microscope acquisition gives comparable results, in terms of standard deviation and molecular aggregate periodicity.     

Site segregation in size-mismatched nanoalloys: Application to Cu-Ag

In order to determine the energetic driving forces for surface segregation in bimetallic clusters, we use a combined approach coupling numerical simulations within an N-body interatomic potential and a lattice-gas model. This approach, which has been used successfully to study both the superficial segregation in semi-infinite alloys and the intergranular segregation, allows us to determine the relative contributions of the three elementary driving forces for the different sites of the cluster surface (vertices, edges and facets) in both dilute limits for the Cu-Ag system. We show that the segregation hierarchy based on broken-bond arguments (preferential segregation to the vertex sites, less to edge sites, and least to facet sites) is not at all universal. In particular, unusual hierarchies are predicted when the sizes of the constituents are strongly different. Furthermore, we compare the segregation driving forces for cubo-octahedral and icosahedral clusters. They are similar for the vertex sites and edge sites, whereas they differ significantly for the sites of the triangular facets. The segregation of the species with the largest atomic radius (Ag) is indeed largely enhanced in the icosahedral structure due to dilations of the orthoradial distances.     

无界区域抛物方程自然边界元方法

本文应用自然边界元方法求解无界区域抛物型初边值问题。首先将控制方程对时间进行离散化,得到关于时间步长离散化的椭圆型问题。通过Fourier展开,导出相应问题的自然积分方程和Poisson积分公式。研究了自然积分算子的性质,并讨论了自然积分方程的数值解法,最后给出数值例子。从而解决了抛物型问题的自然边界归化和自然边界元方法。