Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

由硅醚经脱保护-氧化-Wittig反应一锅法合成,-不饱和酯

在1摩尔醋酸和稳定的Wittig试剂存在下, 活性MnO₂作为氧化剂时, 硅醚发生脱保护-氧化-Wittig反应. 考查了各种硅醚, 诸如苄基硅醚、炔丙基硅醚、烯丙基硅醚和烷基硅醚等作底物在反应性能方面的差异. 该反应使硅醚直接形成碳碳双键而得到α,β-不饱和酯. 产物的结构经红外光谱、核磁共振谱表征.     

4-hydroxy-2-quinolones. 96. Synthesis and properties of 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid

Alkaline hydrolysis of the ethyl ester of 4-(cyanoethoxycarbonylmethyl)-2-oxo-1,2-dihydroquinoline-3-carboxylic acid is accompanied by decarboxylation with loss of two molecules of CO₂ and leads to 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 887–893, June, 2006.     

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996     

Determination of levodopa methyl ester and its metabolites in rat serum by CZE with amperometric detection

A reliable and reproducible method, capillary zone electrophoresis with amperometric detection (CZE–AD), has been developed for separation and quantification of levodopa methyl ester (LDME) and its biotransformation products levodopa (L-DOPA) and dopamine (DA) in rat serum. A carbon-disk electrode was used as working electrode. The optimum conditions for CZE detection were 50 mmol L^–1 phosphate solution at pH 7.0 as running buffer, 17 kV as separation voltage, 1.0 V (vs Ag/AgCl, 3.0 mol L^–1) as detection potential, and sample injection for 8 s at 17 kV. The linear ranges were from 2.4×10^–2 to 2.2 g mL^–1 for LDME, 2.9×10^–1 to 49.5 g mL^–1 for L-DOPA, and 1.4×10^–2 to 1.5 g mL^–1 for DA with correlation coefficients of 0.9997, 0.9994, and 0.9999, respectively. The detection limits for LDME, L-DOPA, and DA were 14.6, 98.0, and 9.7 ng mL^–1, respectively. Recoveries were 80.3% for LDME, 93.5% for L-DOPA, and 86.5% for DA. This method was applied to serum samples after intravenous injection of LDME and L-DOPA to rats.     

Rapid transacylations of activated ester substrates bound to the primary side β-cyclodextrin-cyclen conjugate and its M2+ complexes

The ability of cyclodextrins to effect rapid transacylations of bound substrates has been well studied. One important difference between cyclodextrin and enzyme-mediated transacylation is the pH required. Because the pK _a of a cyclodextrin secondary-side hydroxyl group is about 12, transacylations are accelerated in the presence of cyclodextrin under basic conditions (pH > 10.5). In 1988, our group reported the synthesis of cyclodextrin with attached cyclen-Co(III) complexes; significant acceleration in the reaction withp-nitrophenyl acetate was observed only with the primary side derivative. Of course, metalloenzymes utilize M²⁺ and not M³⁺ catalytic centers; in addition, large rate accelerations in the transacylations of both activated and unactivated substrates have been observed previously in systems utilizing M²⁺ ions (e.g., Zn, Cu, Ni) as well as M³⁺ ions (e.g. Co, Ir, Cr). In this paper, we describe the ability of CD-cyclen-M²⁺ conjugates to transacylate activated esters, amides, and phosphates. In addition, the ability of the apoenzyme mimic to effect transacylations was examined.     

Redox Transformation of Adducts from Cycloaddition of Diazoacetic Ester to β-Arylacryloyloxiranes

It was established that, in addition to ethyl 4-aryl-3-(2,3-epoxyalkanoyl)-4,5-dihydro-1H-pyrazole-5-carboxylates, the reaction of diazoacetic ester with β-arylacryloyloxiranes also gives ethyl 4-aryl-3(5)-(3-hydroxy-2-methylalkanoyl)-1H-pyrazole-5(3)-carboxylates. The latter are formed from the tautomeric ethyl 4-aryl-5-(2,3-epoxyalkanoyl)-4,5-dihydro-1H-pyrazole-3-carboxylates as a result of intramolecular oxidative-reductive disproportionation. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, 1150–1160, August, 2005.     

含己烷雌酚的聚磷酸酯的合成及其抗肿瘤活性研究

合成了３种主链含己烷雌酚的生物可降解的聚磷酸酯，结构经ＩＲ，＾１ＨＮＭＲ和元素分析鉴定，通过水接触角的测定研究了聚合物的亲水－疏水性能，以ｐＨ值变化表征了聚合物的体外水解速率。初步的体外实验表明，此类聚磷酸酯具有较好的体外抗艾氏腹水癌活性。     

Chemical Constituents from the Root of Antidesma Pentandrum var. Barbatum

Investigation of the root extract of Antidesma pentandrum var. barbatum led to the isolation of seven new compounds, antidesmol ( 1 ), antidesmanins E ( 2 ) and F ( 3 ), antidesnone ( 4 ), antidesnol ( 5 ), barbatumols A ( 6 ) and B ( 7 ), together with 14 known compounds including sodium aristolochate‐I ( 10 ) and aristolochic acid‐I methyl ester ( 11 ).