竹炭负载氧空位型BiOI/BiOCl复合光催化剂脱硝机理

以竹炭为载体,采用溶剂热法制备了氧空位(OV)型BiOI/BiOCl光催化剂,考察了温度和光照强度对其催化脱硝性能的影响,采用SEM、XPS、XRD、PL、Uv-vis等表征方法研究了该复合光催化剂上的脱硝机理。结果表明,在氙灯功率500 W、温度30℃时,最佳脱硝效率可达73%。氧空位改性可以增大竹炭的比表面积和孔容,提高其吸附能力,同时使C=O双键和-COO形式的酸性官能团分解为C-O官能团;OV改性还增加了光催化活性位点,减少了电子空穴对复合概率,从而提高了对NO的光催化降解效率。     

采用第一性原理研究非金属掺杂BiOCl的电子结构和光吸收性质

基于密度泛函理论的第一性原理分别研究了不同浓度Br和I掺杂BiOCl体系的能带结构、态密度、形成能和光学性质.研究结果表明,由于Br的4p和I的5p轨道作用,Br和I掺杂可在一定程度上降低BiOCl的禁带宽度,拓宽BiOCl的光吸收范围.Br和I掺杂BiOCl的形成能计算结果表明,Br掺杂BiOCl的稳定性高于I掺杂体系.对于B,C,N,Si,P和S掺杂BiOCl体系,掺杂能级的形成主要由掺杂元素的np轨道贡献,使BiOCl吸收带边红移至可见光区.而S掺杂则位于价带顶位置,有效地降低了BiOCl禁带宽度,使BiOCl响应波长出现红移,且未形成中间能级,不易成为俘获陷阱,因此S掺杂将是一种提高BiOCl可见光光催化活性的改性方法.     

分级结构CdS QDs/BiOCl复合光催化剂的制备及其对有机污染物的降解

采用简单液相沉积法制备了分级结构Cd S QDs/Bi OCl复合光催化剂,以XRD,SEM,TEM,HRTEM,XPS,EDS,UV-Vis DRS,PL等测试方法分别表征了样品的物相、形貌、组成、元素含量、光吸收性能以及光电特性,并以罗丹明B(Rh B)和苯酚为模型污染物,分别在可见光和紫外光下评价Cd S QDs/Bi OCl复合光催化剂的催化性能。测试结果表明,粒径为5.5μm的Bi OCl微球由大量纳米片有序堆积而成,所负载的粒径为10~20 nm的Cd S QDs均匀分布在Bi OCl纳米片表面。与纯Bi OCl和Cd S QDs/Bi OCl相比,Cd S QDs/Bi OCl-3%表现出最佳的光催化性能,其对Rh B和苯酚的降解速率常数分别是纯Bi OCl的2.6倍和5.3倍。Cd S QDs/Bi OCl复合光催化剂性能的提高可归结于,分级结构Bi OCl有效防止了片层堆积,有助于Cd S QDs的负载,另外,Cd S QDs的负载拓展了复合光催化剂的光吸收性能,均匀分布的Cd S QDs与Bi OCl形成的异质结促进了光生电子-空穴对的有效分离。     

First-principles investigation of impurity concentration influence on bonding behavior,electronic structure and visible light absorption for Mn-doped BiOCl photocatalyst

We performed first-principles calculation to investigate the bonding behavior, electronic structure and visible light absorption of Mn_xBi_1−xOCl (x=0, 0.0625, 0.09375 and 0.125) using density functional theory (DFT) within a plane-wave ultrasoft pseudopotential scheme. The relaxed structural parameters are consistent with the experimental results. The bonding behavior, bond orders, Mulliken charges and bond populations as well as formation energies are obtained. The calculated band structures and density of states show that Mn incorporation results in some impurity energy levels of Mn 3d states in forbidden band as well as valence band and conduction band, and that Mn 3d states, for the modest Mn doping concentration, not only can act as the capture center of excited electrons under longer wavelength light irradiation, but also may trap the photo-excited holes, improving the transfer of photo-excited carriers to the reactive sites. Our calculated optical absorption spectra exhibit that the spectral absorption edge is obviously red-shifted and extends to the visible, red and infrared light region due to the incorporation of Mn. Our calculated absorption spectra are in excellent agreement with the experimental results of Mn-doped BiOCl photocatalyst.     

Bi2S3/BiOCl复合光催化剂的水热合成及其高活性

采用一种简便的水热法在433 K的温度下成功合成了具有不同Bi2S3质量分数的Bi2S3/BiOCl复合光催化剂,利用各种技术对其进行了表征.在紫外光照射下,以甲基橙水溶液的光催化降解为模型反应,评价了Bi2S3/BiOCl复合光催化剂的活性.研究结果表明:与纯Bi2S3和纯BiOCl相比,Bi2S3/BiOCl样品明显具有更高的光催化性能,尤其当Bi2S3在Bi2SJBiOCl中的质量分数为26.5％时,Bi2 SJBiOCl复合催化剂的光催化活性与商业P25(TiO2)的活性非常接近,而这种商业P25在紫外光照射下是公认的高效光催化剂.这种明显提高的光催化活性主要归功于光生电子和空穴在Bi2S3和BiOCl形成异质结界面上的有效转移,降低了电子-空穴对的复合.     

Fabrication of FeOOH/BiOCl Nanocomposites with Enhanced Visible Light Photocatalytic Activity

BiOCl as a two‐dimensional layer ternary oxide semiconductor, has been widely used in energy and environmental area due to its non‐toxicity, price and the good photocatalytic performance. However, BiOCl has a wide bandgap and can only absorb ultraviolet light, which limits its solar energy conversion efficiency for practical application. Herein, we report a facile synthesis of FeOOH/BiOCl nanocomposites by hydrothermal method. The results of XPS and FT‐IR indicated that FeOOH has been loaded on the nanocomposites. The chemical and optical properties of the nanocomposite are well‐characterized. The nanocomposite showed much more excellent photocatalytic performance compared with the individual FeOOH and BiOCl single component. Reactive specie trapping experiment indicated that · O^2– and h⁺ were the two main active species during the photocatalytic process of FeOOH/BiOCl nanocomposites.     

BiOCl/ZnO异质结型复合光催化剂的水热合成及其光催化性能

以醋酸锌、氯化钠、硝酸铋和氧氧化钠为原料,利用水热法合成了含BiOCl为1wt;、2wt;、4wt;、8wt;和16wt;的异质结型BiOCl/ZnO复合光催化剂.采用X射线粉末衍射(XRD)、扫描电镜(SEM)、傅里叶变换红外光谱(FT-IR)、紫外可见漫反射光谱(UV-Vis DRS)和光致发光(PL)谱等系列手段对所制备的光催化剂进行了表征.以紫外光(254 nm)为光源,酸性橙Ⅱ为光催化反应降解模型,进行光催化活性测试,考察了复合BiOCl对ZnO光催化剂反应活性和稳定性的影响.研究表明,异质结型BiOCl/ZnO复合光催化剂的光催化性能明显优于纯ZnO.当复合BiOCl的含量为4wt;时,光催化活性最佳,为纯ZnO的3.4倍,同时该催化剂在循环使用中具有更好的稳定性.     

Photocatalytic mineralization study of malachite green on the surface of Mn-doped BiOCl activated by visible light under ambient condition

Manganese doped BiOCl has been synthesized by hydrolysis method and characterized by X-ray diffraction (XRD), scanning electron micrographs (SEM) and diffusive reflectance spectra (DRS) methods. Interesting results have been obtained from diffusive reflectance spectra. XRD results show a decrease in the lattice parameter for Mn-doped BiOCl and UV-vis measurement reveals that there is a shift in the optical absorption edge toward higher wavelength, which indicates a decrease in the band gap upon Mn doping. The increased photocatalytic activity in degradation of malachite green dye by Mn-doped BiOCl might be due to increase in life time of photogenerated electrons and holes due to scavenging of electrons by Mn, charging the particle surface due to electron on the surface, which enhances the adsorption of dye molecules, or/and decreased crystallite size. The effect of key operating parameters have also been investigated. Complete mineralization has been confirmed by COD analysis. An assumptive reaction mechanism has also been proposed.     

BiOCl{001}表面原子与电子结构的第一性原理研究

基于密度泛函理论的第一性原理方法研究了BiOCl{001}的三种不同终端面({001}-1Cl, {001}-BiO 和{001}-2Cl)的表面弛豫、能带结构、电子态密度和表面能. 计算结果表明: {001}-1Cl, {001}-BiO和{001}-2Cl表面均发生明显弛豫, 而在双Cl原子层处的层间距变化较大, 但未出现振荡弛豫现象, 其中{001}-1Cl表面弛豫较小. 与体相BiOCl电子结构相比, BiOCl{001}面具有较窄的带隙宽度, 并呈现较强局域性:对于{001}-BiO表面, 其导带与价带均往低能方向发生较大移动, 并且在导带底部出现表面态; 而{001}-2Cl表面的表面态主要出现在价带顶; {001}-1Cl表面的带隙中则无表面态产生; 表面态的出现导致{001}-BiO面和{001}-2Cl面带隙明显减小. BiOCl{001}三种终端表面的表面能分析结果表明, {001}-1Cl表面的表面能最小(0.09206 J·m^-2), 结构最稳定, 而{001}-BiO表面和{001}-2Cl表面的表面能分别为2.392和2.461 J·m^-2. 理论预测{001}-BiO表面和{001}-2Cl表面具有较高的活性, 但在BiOCl晶体生长过程中不易暴露. 本文计算结果为实验获得BiOCl高活性面{001}给予了基础理论解释, 进一步为BiOCl新型光催化材料的应用研究提供理论指导. 关键词： BiOCl{001}表面 表面弛豫 表面能 第一性原理     

电化学法合成BiOCl薄膜及其光催化活性研究

以金属Bi板为阳极,石墨为阴极,NaClO为电解液,在室温下用电化学法一步合成了BiOCl薄膜光催化剂.采用X射线衍射(XRD)、紫外可见漫反射(DRS)、扫描电镜(SEM)、透射电子显微镜(TEM)对其组成、光学特性和形貌进行表征.以500 W氙灯为光源,磺胺甲恶唑为目标降解物,研究了NaClO用量、电解电流大小、EDTA添加量以及电解溶液初始pH不同制备条件下对所得BiOCl薄膜催化活性的影响.结果表明,合成的BiOCl-0薄膜为组分单一、均匀的片状结构,在模拟太阳光下照射150m in,磺胺甲恶唑的降解率达89.8;,而且该薄膜具有较好的光催化稳定性.