低氧掺杂纳米石墨片的制备及其电化学性能

采用一种新颖的物理方法——磁力研磨法制备石墨片纳米材料,该方法能够高效的将初始鳞片石墨剥离破碎至纳米级别。研究发现,制备得到的纳米石墨片(Graphite nanosheet)具有一定的含氧官能团,并且随研磨时间增加,其比表面积可增加至804m~2·g~(-1)。电化学性能测试结果表明,在0.1 A·g~(-1)的电流密度下,最大比电容量可达到266.8 F·g~(-1),体现出了良好的电化学性能。     

鳞状BiOBr/Bi2WO6的合成及其吸附性能

采用一步水热法成功制备鳞状形貌的BiOBr/Bi₂WO₆复合物,通过X射线衍射（XRD）仪、扫描电子显微镜（SEM）、N2吸附/解吸附比表面测定仪（BET）、傅里叶变换红外（FT-IR）光谱等对复合物进行了表征。对比Bi₂WO₆与BiOBr的SEM照片,结合KBr的浓度实验,提出了BiOBr/Bi₂WO₆的鳞状形貌的形成机理。选取有机染料为吸附质,BiOBr/Bi₂WO₆为吸附剂进行了复合物吸附性能测试。结果表明,BiOBr/Bi₂WO₆对阳离子染料表现出优越的吸附性能,10 min对次甲基蓝（MB）的吸附率高达99%,优于常规的活性炭吸附剂。此外,BiOBr/Bi₂WO₆对有机染料的吸附行为符合准二级反应速率方程和Freundlich等温吸附模型。     

ZnSe纳米片晶的可控合成

以乙二胺四乙酸(EDTA)为稳定剂、丁胺(BA)为结构导向模板, 采用水热合成方法制备了尺寸和晶型可控的ZnSe纳米片晶; 利用XRD, TEM, SEM以及紫外-可见漫反射等手段对所得的产物进了表征, 结果表明, 通过改变水热温度和BA用量, 可以实现ZnSe纳米片晶的大小和物相的调控, 并初步分析了其形成过程.     

Covalent Triazine Framework Nanosheets for Efficient Energy Storage and Conversion

Two-dimensional crystalline covalent triazine frameworks(CTFs) have received much attention because of their unique triazine structure, which endows CTFs with high thermal and chemical stability, high proportion of nitrogen and permanent porosity. Based on this unique structure characteristic, CTFs have shown great potential in energy storage and conversion due to the intrinsically strong conjugated structure, delocalized electron and rich active sites. However, charge carrier(electron, hole or ion) transport can't reach the deep active sites and charge diffusion was impeded by defects in bulk CTFs. Hence, to break through this barrier, increasing attention has been paid to get few layered CTFs or CTFs nanosheets in order to shorten the pathways of charge diffusion and expose more active sites. This review summarizes the synthetic methodologies of CTFs nanosheets and the potential application in photocatalytic and electrochemical energy storage and conversion.     

Versatile gold-polymer nanointerfaces probed by GISAXS

An increasing trend toward integration of polymers in microelectronics and organic electronics has recently boosted research focusing in metal-polymer interfaces. These two materials differ vastly, with the former forming dense, crystalline, cohesive structures and the latter forming open structures bound together by weak van der Waals forces. As a result, there is dire need to assess their surface features (e.g., roughness) and correlate them with corresponding growth parameters, as metal-polymer interfaces are mainly determined by the preparation process. Here, we report a laboratory-based grazing-incidence small-angle x-ray scattering (GISAXS) study on distinct gold-polymer interfaces fabricated with different growth mechanisms, utilizing in-plane and oblique sputter geometries. GISAXS provided an improved analytic scheme for the buried surface in free-standing 2D gold-polymer nanosheets (with 19% porosity) revealing their fractal structure (Porod slope: ?1.71). Two quantitative approaches (Height-Height Correlation and Power Spectral Density functions) were used to describe rough surfaces characterized by Atomic Force Microscopy (AFM) in consort with GISAXS data; different correlation length dependencies on growth time were revealed for gold rough surfaces grown on bare and polymerized Si. The results are considered pertinent to interfacial nanoscience and engineering, enabling statistical data collection from large surface areas, in a fast and nondestructive manner.     

原位构筑溴氧化铋/聚吡咯复合材料用于光催化降解阴离子染料

采用光化学反应法在稀酸条件下制备出薄片状溴氧化铋（BiOBr）,将其分散于含有过硫酸铵和十六烷基三甲基溴化铵的水溶液中,通过吡咯的一步聚合反应原位制备出聚吡咯（PPy）修饰的BiOBr复合材料（BiOBr/PPy）。通过扫描电子显微镜、透射电子显微镜、X射线衍射、拉曼光谱、X射线光电子能谱、紫外可见光谱及荧光光谱等综合表征技术对样品的晶体结构、形貌特征和光电特性等进行测试。结果显示,PPy成功修饰到BiOBr薄片上,BiOBr与PPy接触紧密且相互作用强。与纯BiOBr相比,BiOBr/PPy复合材料具有更强的可见光吸收效率和增强的光催化降解甲基橙（MO）染料活性。通过优化PPy和BiOBr的组合比例,当BiOBr质量分数约为7%时,BiOBr/PPy-2在50 min内对MO （30 mg·L^-1）的降解率为87.3%;另外,循环光催化活性虽有降低但仍高于纯BiOBr和纯PPy （10.4%）。这表明BiOBr与PPy之间较强的相互作用和良好的界面结合可以有效地促进光生电子与空穴的分离效率。反应体系中分离的光生空穴、衍生自由基在染料氧化降解中发挥了重要作用。     

Metal Oxide/Nitrogen-Doped Carbon Nanosheet Heteronanostructures as Highly Efficient Electromagnetic Wave Absorbing Materials

In this paper, we will discuss the excellent broadband microwave absorption behaviors of Cu/CuO/carbon nanosheet composites: traces of copper and oxide embedded in a carbon nano-sheet not only cut down the high permittivity of adsorbs but also induce more interfacial polarization centers. The results showed that at a cracking temperature of 900 °C, the fabricated material has a unique ripple-like structure, which promotes the hierarchical interfacial polarization. The prepared material has a maximum absorption bandwidth of 4.48 GHz at an exceedingly thin thickness of 1.7 mm and a maximum reflection loss of −25.3 dB at a thickness of 2 mm. It is a relatively ideal material for electromagnetic wave absorption.     

单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。     

新型纳米催化剂Pd/g-C_3N_4 NSs的制备及其在Suzuki-Miyaura反应中的应用

通过一步法将纳米Pd负载于二维氮化碳纳米片(g-C3N4)上,制得一种新型的二维纳米催化剂Pd/g-C_3N_4NSs(1),其结构和形貌经TEM,XRD和XPS表征。以卤代苯与取代苯硼酸的Suzuki-Miyaura反应为探针反应,研究了1的催化性能。结果表明:1催化活性较好,TOF为53 000 h-1,部分产物收率高于99%,循环使用3次,其催化性能基本不变。