Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).     

Efficient chemoselective deprotection of silyl ethers using catalytic 1-chloroethyl chloroformate in methanol

Fast and chemoselective desilylation of silyl-protected alcohols was achieved using a catalytic amount of 1-chloroethyl chloroformate in methanol. With a minimal amount of 1-chloroethyl chloroformate as the source for anhydrous HCl, extremely efficient cleavage of silyl ethers of primary and secondary alcohols was accomplished, and chemoselective deprotection of one silyl ether in the presence of another silyl or other acid-labile group was possible through controlling the amount of the chloroformate and reaction time.     

Radical additions to fluoro-olefins. photochemical mono-fluoroalkylation and sequential bis-fluoroalkylation of oxolane

Oxolane was fluoroalkylated by its photoadditions under atmospheric pressure. Monofluoro-alkylations were carried out with hexafluoropropene (1) and perfluorovinyl ethers C₃F₇O-[CF(CF₃)CF₂O]_n-CF = CF₂ (24, n = 0–2) by direct photoexcitation of the olefins to give high yields of addition products 9–12 (81–94%). The reactions were completely regioselecti ve at the oxolane molecule and almost completely regioselective (93–99%) at the double bond of fluoro-olefins; no bis-fluoroalkylated oxolanes were detected. The completely selective introduction of a second fluoroalkyl into position 5 of the oxolane molecule was accomplished by acetone-sensitised photoaddition of 2fluoroalkylated oxolanes 9,10 to fluoro-olefins 1 and 2. Byproducts from reactions of the dimethylketyl radical which is formed in the initiation step were isolated and have given some evidence about the reaction mechanism that is discussed.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Selective synthesis of 14β-amino taxanes

The base induced deprotonation of H-14 of 7-triethylsilyl- (7-TES-) and 7-tert-butoxycarbonyl- (7-BOC-) protected 13-oxo-baccatins gave the corresponding enolates, which were selectively aminated with electrophilic nitrogen donors, such as azodicarboxylates and tosyl azide. In particular, tosyl azide gave the corresponding 7-BOC- and 7-TES-13-oxo-14β-azido-baccatin III. Alternatively, the last compound was prepared via NaN₃ induced azidation of the 13-silyl enol ether of 7-TES-13-oxo-baccatin III under oxidative (cerium ammonium nitrate) conditions. The 13-silyl enol ether was obtained in a multistep process by DBU induced silylation of 7-TES-13-oxo-baccatin III. The 7-TES-13-oxo-14β-azido-baccatin III was used as a key intermediate for the synthesis of a new family of antitumour taxanes containing amino based functional groups at the C-14 position, such as: 14β-azido, 14β-amino, 14β-amino 1, 14-carbamate, 14β-amino 1, 14-thiocarbamate, and 14β-amino N-tert-butoxycarbonyl-1,14-carbamate.     

Synthesis of [Ni(η-CH2C6H4R-4){PPh(CH2CH2PPh2)2}] (R = H, Me or MeO) and protonation reactions with HCl

The complexes [Ni(η²-CH₂C₆H₄R-4)(triphos)]BPh₄ {R = H, Me or MeO; triphos = PhP(CH₂CH₂PPh₂)₂} have been prepared and characterised by spectroscopy and X-ray crystallography. In all cases the coordination geometry of the nickel is best described as square-planar with an η²-benzyl ligand occupying one of the positions. The orientation of the η²-benzyl ligand is dictated by the steric restrictions imposed by the phenyl groups on the triphos ligand, so that the phenyl group on the unique secondary phosphorus and the aromatic group of the benzyl ligand (which are trans to one another) are oriented in the same direction. [Ni(η²-CH₂C₆H₄R-4)(triphos)]⁺ react with an excess of anhydrous HCl in MeCN to form [NiCl(triphos)]⁺ (characterised as the [BPh₄]⁻ salt by X-ray crystallography) and the corresponding substituted toluene. The kinetics of the reaction of all [Ni(η²-CH₂C₆H₄R-4)(triphos)]⁺ and HCl in the presence of Cl⁻ have been determined using stopped-flow spectrophotometry. All reactions exhibit a first-order dependence on the concentration of complex and a first-order dependence on the ratio [HCl]/[Cl⁻]. Varying the 4-R-substituent on the benzyl ligand shows that electron-withdrawing substituents facilitate the rate of the reaction. It is proposed that the mechanism involves initial rapid protonation at the nickel to form [NiH(η²-CH₂C₆H₄R-4)(triphos)]²⁺, followed by intramolecular proton migration from nickel to carbon to yield the products.     

Molecular structures of benzoylbenzo-12-crown-4 and diphenylacetylbenzo-12-crown-4 and possible reasons for different conformational states of their macrocycles

The molecular structures of (benzoyl)benzo-12-crown-4 (a=22.387,b=4.503,c=16.167 Å,d _calc=1.34 g cm^–3,Z=4, space groupP2₁ nc, DAR-UM, Cu-K,R=0.056) and (diphenylacetyl)benzo-12-crown-4 (a=8.866,b=23.337,c=10.737 Å;d _calc=1.25 g cm^–3,Z=4, space groupP2₁2₁2₁, DAR-UM, Cu-K, R=0.056) have been investigated. The differences in the conformations of the macrocycles and the degree of conjugation between the benzene ring orbitals and the lone pairs on the adjacent oxygen atoms in the macrocycle are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1906–1911, November, 1993.     

Relative thermodynamic stabilities of 2-substituted 4-methylene-1,3-dioxolanes and 4-methyl-1,3-dioxoles

The relative thermodynamic stabilities of 24 pairs of carbon-carbon double-bondexo-endo isomeric 2-substituted 4-methylene-1,3-dioxolanes (a) and 4-methyl-1,3-dioxoles (b) have been determined by base-catalyzed chemical equilibration in DMSO solution. In all cases, theendo isomer (b) is the favored species at thermodynamic equilibrium. A single alkyl substitutent on C-2 gives only a negligible contribution to the relative stability of the isomeric forms, but the presence of two alkyl groups on C-2 increases the relative stability of theendo isomer by 2–3 kL mol^–1. A still higher effect in favor of theendo isomer is produced by introduction of a single alkoxy group on C-2; this effect is further slightly accentuated by 2,2-dialkoxy substitution at C-2. The origin of the favorable effect of 2-alkoxy substitution on the relative stability of theendo isomer is not clear, but it seems to arise from an unexpected stability of theendo isomer rather than from an enhanced destabilization of theexo form.     

Synthesis of sugar-based ethenyl ethers through a vinyl bis-sulfone methodology

The recently devised route to ethenyl ethers—i.e. 1,2-bis(phenylsulfonyl)ethylene (BPSE)-mediated conversion of alcohols into β-alkoxyvinyl sulfones followed by reductive desulfonylation—has been applied in the carbohydrate field to the synthesis of a number of vinyl-functionalised monosaccharides, a number of which had not been prepared via alternative routes.     

Synthesis and extraction properties of new chromogenic azo-calix[4]dibenzothiacrown ethers

Two novel chromogenic cone calix[4]dibenzothiacrown ethers 3 and 4 in which nitrophenylazo groups attached at the phenyl ring of dibenzothiacrown unit were described. The extraction properties of 3 and 4 toward different transition metal ions have been studied using conductometric technique and found to exhibit Cu²⁺ and Hg²⁺ selectivity with very high stability constants range from log K _assoc = 5.19 to log K _assoc = 8.72.