Iron‐Catalyzed Highly Enantioselective cis‐Dihydroxylation of Trisubstituted Alkenes with Aqueous H2O2

Reliable methods for enantioselective cis‐dihydroxylation of trisubstituted alkenes are scarce. The iron(II) complex cis‐α‐[Fe^II(2‐Me₂‐BQPN)(OTf)₂], which bears a tetradentate N₄ ligand (Me₂‐BQPN=(R,R)‐N,N′‐dimethyl‐N,N′‐bis(2‐methylquinolin‐8‐yl)‐1,2‐diphenylethane‐1,2‐diamine), was prepared and characterized. With this complex as the catalyst, a broad range of trisubstituted electron‐deficient alkenes were efficiently oxidized to chiral cis‐diols in yields of up to 98 % and up to 99.9 % ee when using hydrogen peroxide (H₂O₂) as oxidant under mild conditions. Experimental studies (including ¹⁸O‐labeling, ESI‐MS, NMR, EPR, and UV/Vis analyses) and DFT calculations were performed to gain mechanistic insight, which suggested possible involvement of a chiral cis‐Fe^V(O)₂ reaction intermediate as an active oxidant. This cis‐[Fe^II(chiral N₄ ligand)]²⁺/H₂O₂ method could be a viable green alternative/complement to the existing OsO₄‐based methods for asymmetric alkene dihydroxylation reactions.     

介孔铁铝/蒙脱土复合材料：解离柱撑制备、结构及催化羟基化性能

利用极稀悬浮液中蒙脱土的解离作用并结合柱化技术过程，制备了介孔结构的铝铁/蒙脱土复合材料(Fe-Al/mmt)；并采用粉末X射线衍射、氮等温吸脱附、傅立叶红外光谱、紫外可见光漫反射光谱及苯酚催化羟基化反应表征了其结构和性能。结果显示，铁铝聚合前驱液中铁/铝比影响复合材料中蒙脱土的解离程度，且仅当低铁/铝比时(即Fe/(Fe+Al)物质的量的比介于0.05～0.3)，嵌入解离的蒙脱土片层间的混合铁铝物种呈现能耐温350 ℃的热稳定性；氮等温吸脱附分析反映出这种解离的蒙脱土堆积结构呈现介孔特征，孔径分布窄，介于2.0～2.3 nm；红外分析表明材料表面具有L酸和B酸位，并且L酸位量与嵌入解离的蒙脱土结构中的混合铁铝物种相关；由于结构中混合铁铝物种的存在及相应的Si-O → Fe、Al-O → Fe间的电子跃迁，Fe-Al/mmt材料在紫外区呈现宽泛的能量吸收特征。这些结果说明，由于混合铁铝物种嵌入于解离的蒙脱土片层堆积结构中，形成了“卡片屋”式介孔结构。实验条件下，Fe/(Fe+Al)物质的量的比为0.3的Fe-Al/mmt呈现较佳的催化羟基化性能，苯酚转化率为36.7%，二酚产物选择性32.3%；并且初步表明铝掺杂后，通过铁铝比和表面酸性的调整，材料的部分选择氧化性能可以得到改善。     

铜铝水滑石类化合物催化苯酚羟化反应的研究

利用共沉淀法合成了不同Cu/Al比例的铜铝水滑石类化合物, 且利用XRD, IR对此类化合物进行了表征。首次用于催化苯酚羟化反应,并获得了较好的结果, 同时探讨了Cu/Al比例, 反应温度, 反应介质及介质的pH值对反应活性的影响。初步提出了反应机理。     

纳米Ru-Mn/ZrO2催化剂上苯选择加氢制环己烯

采用共沉淀法制备了一系列不同Mn含量的纳米Ru-Mn催化剂,考察了纳米ZrO₂作分散剂时它们催化苯选择加氢制环己烯的反应性能,并采用X射线衍射、透射电镜、N₂物理吸附、X射线荧光、原子吸收光谱和俄歇电子能谱等手段对催化剂进行了表征.结果表明,Ru-Mn催化剂上Mn以Mn₃O₄存在于Ru的表面上.在加氢过程中,Mn₃O₄可以与浆液中ZnSO₄发生化学反应生成一种难溶性的(Zn(OH)₂)₃(ZnSO₄)(H₂O)₃盐.该盐易化学吸附在Ru催化剂表面上,从而在提高Ru催化剂上环己烯选择性起关键作用.当催化剂中Mn含量为5.4%时,环己烯收率为61.3%,同时具有良好的稳定性和重复使用性能.     

苯直接羟基化制苯酚研究进展*

综述了苯直接羟基化制苯酚的几种催化反应,包括阳极氧化法、N₂O氧化法、H₂O₂氧化法、O₂直接氧化法,这些反应均具有良好的原子经济性和环境效益.同时重点介绍了相关的催化剂及其活性中心,探讨了这些新型方法的工业应用前景.     

Air sampling of aromatic hydrocarbons in the presence of ozone by solid-phase microextraction

Effects of ozone on air sampling of standard gas mixtures of aromatic hydrocarbons were tested using solid-phase microextraction (SPME). Standard concentrations of ozone ranging from 10 ppb (v/v) to 6400 ppm (v/v) were generated using an in-house built ozone generator based on corona discharge. Effects of temperature, discharge voltage, and oxygen flow on the ozone generation were tested. The working dc voltage had the greatest effect on generated ozone concentration and was proportional to the ozone concentration. Generation temperature and oxygen flow rate were inversely proportional to ozone concentrations. Produced ozone was mixed with standard benzene, toluene, ethylbenzene, and xylenes (BTEX) gas at less than 100 ppb (v/v). Air samples were collected with poly(dimethylsiloxane) (PDMS) 100 microm SPME fibers and analyzed by gas chromatography (GC)-flame ionization detection (FID) and GC-MS. Significant reductions of BTEX concentrations were observed. In addition, some products of BTEX-ozone-oxygen reactions were identified. SPME worked well as a rapid sampler for BTEX and BTEX-ozone-oxygen reaction products. No significant deterioration of the PDMS coating and no significant reduction of absorption capacity were observed after repeated exposure to ozone.     

共聚法和嫁接法制备二茂铁杂化介孔材料及其催化性能

 以桥联硅氧烷 1,1'-双[(2-三乙氧基硅基) 乙基]二茂铁 (BTEF) 和正硅酸乙酯为前驱体, 以十六烷基三甲基溴化铵为结构导向剂, 采用共聚法制备了二茂铁功能化的周期介孔有机硅烷材料 (PMO-Fc). 同时以 BTEF 为修饰剂, 以甲苯为分散剂, 采用嫁接法制备了 Fc-MCM-41 杂化介孔材料. 采用 N2 物理吸附、X 射线衍射、透射电镜和红外光谱等手段对材料进行了表征, 评价了其催化苯羟化反应活性. 结果表明, PMO-Fc 具有有序的二维六方形孔道结构, 较大的比表面积和孔体积, 在苯羟化反应中表现出比 Fc-MCM-41 更高的催化活性, 苯酚的选择性和收率分别为 65.3% 和 20.2%.     

近中性条件下含铜多级孔氧化硅的合成及在苯酚羟基化反应中的催化性能

 在近中性条件下, 以正硅酸甲酯和 Cu(APTES)42+ (APTES: (EtO)3Si(CH2)3NH2) 为前驱体, P123 为模板剂, KCl 为添加剂合成了不同孔结构的含铜介孔氧化硅材料. 扫描电镜和氮气吸附结果表明, 当 Cu(APTES)42+/TMOS 摩尔比较高时能得到具有多级孔结构的材料. 在以 H2O2 为氧化剂的苯酚羟基化反应中, 具有多级孔结构的含铜介孔氧化硅材料表现出比单一介孔材料高的催化性能.     

苯酚羟化反应中焦油的分离与分析

利用高速离心、减压蒸馏和萃取等方法分离和定量分析苯酚催化羟化反应中所产生的副产物焦油,讨论各种方法的特点.使用萃取方法系统地考察了各种条件下,以Cu2(OH)PO4为催化剂时苯酚羟化反应体系中焦油的生成量.     

Vibrational isotope effect by the low rank perturbation method

Mathematical formalism of the Low Rank Perturbation method (LRP) is applied to the vibrational isotope effect in the harmonic approximation with a standard assumption that force field does not change under isotopic substitutions. A pair of two n-atom isotopic molecules A and B which are identical except for isotopic substitutions at ρ atomic sites is considered. In the LRP approach vibrational frequencies ω _k and normal modes of the isotopomer B are expressed in terms of the vibrational frequencies ν _i and normal modes of the parent molecule A. In those relations complete specification of the normal modes is not required. Only amplitudes at sites τ affected by the isotopic substitutions and in the coordinate direction s (s = x, y, z) are needed. Out-of-plane vibrations of the (H,D)-benzene isotopomers are considered. Standard error of the LRP frequencies with respect to the DFT frequencies is on average . This error is due to the uncertainty of the input data (± 0.5 cm⁻¹) and in the absence of those uncertainties and in the harmonic approximation it should disappear. In comparing with experiment, one finds that LRP frequencies reproduces experimental frequencies of (H,D)-benzene isotopomers better () than scaled DFT frequencies () which are designed to minimize (by frequency scaling technique) this error. In addition, LRP is conceptually and numerically simple and it also provides a new insight in the vibrational isotope effect in the harmonic approximation.