Kinetics and Mechanism of the Cerium(IV) Oxidation of Arnold's Base and the Protonation and Hydroxylation of Michler's Hydrol Blue

In aqueous H₂SO₄, Ce(IV) ion oxidizes rapidly Arnold's base((p-Me₂NC₆H₄)₂CH₂, Ar₂CH₂) to the protonated species of Michler's hydrol((p-Me₂NC₆H₄)₂CHOH, Ar₂CHOH) and Michler's hydrol blue((p-Me₂NC₆H₄)₂CH⁺, Ar₂CH⁺). With Ar₂CH₂ in excess, the rate law of the Ce(IV)-Ar₂CH₂ reaction in 0.100 M H₂SO₄ is expressed -d[Ce(IV)]/dt = k_app[Ar₂CH₂]₀[Ce(IV)] with k_app = 199 ± 8M^?1s^?1 at25°C. When the consumption of Ce(IV) ion is nearly complete, the characteristic blue color of Ar₂CH⁺ ion starts to appear; later it fades relatively slowly. The electron transfer of this reaction takes place on the nitrogen atom rather than on the methylene carbon atom. The dissociation of the binuclear complex [Ce(III)ArCHAr-Ce(III)] is responsible for the appearance of the Ar₂CH⁺ dye whereas the protonation reaction causes the dye to fade. In highly acidic solution, the rate law of the protonation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_obs[Ar₂CH⁺] where K_obs = ((ac + 1)[H*] + bc[H⁺]²)/(a + b[H⁺]) (in HClO₄) and k_obs= ((ac + 1 + e[HSO₄^?])[H⁺] + bc[H⁺]² + d[HSO₄^?] + q[HSO₄^?]²/[H⁺])/(a + b[H⁺] + f[HSO₄^?] + g[HSO₄^?]/[H⁺]) (in H₂SO₄), and at 25°C and μ = 0.1 M, a = 0.0870 M s, b = 0.655 s, c = 0.202 M^?1s^?1, d = 0.110, e = 0.0070 M^?1, f = 0.156 s, g = 0.156 s, and q = 0.124. In highly basic solution, the rate law of the hydroxylation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_OH[OH^?]₀[Ar₂CH⁺] with k_OH = 174 ± 1 M^?1s^?1 at 25°C and μ = 0.1 M. The protonation reaction of Michler's hydrol blue takes place predominantly via hydrolysis whereas its hydroxylation occurs predominantly via the path of direct OH attack.     

On the effect of low-energy ion bombardment on polystyrene and polymethylmethacrylate etch rates in rf plasmas

The effect of low-energy ion bombardment on CD₄/O₂ and CF₃X (X=F, Cl, Br) plasma etching has been assessed by applying controlled rf bias voltages on polystyrene (PS) and polymethylmethacrylate (PMMA) samples. In both cases ion bombardment has been found to have a chemical effect. In the case of CF₄/O₂ discharges, ion bombardment has been found to change the relative etching efficiency of different mixtures. In the case of CF₃X plasmas, ion bombardment has been found to alter PMMA and PS etch rates in a different way. In particular, the ratios between CF₄ and CF₃X (X=Cl, Br) etch rates of PS have been found to decrease with increasing bias voltage. This effect has been tentatively attributed to an ion bombardment-induced enhancement of the reaction between the aromatic ring and halogen molecules formed in CF₃Cl and CF₃Br discharges.     

Kinetic model of a DC oxygen glow discharge

A simple kinetic model predicting the concentration of oxygen atoms, metastable singlet molecules O₂(a ¹) and negative ions O — in the positive column of a DC glow discharge is developed. The calculated O and O₂(a ¹) concentrations are compared to previously reported measurements for pressuresp=0.2–2 Torr and discharge currentsI=10–80 mA. The electron density calculated from the continuity equationj=n _e e v _d agrees well with experiment. The rate coefficients for electron impact processes used in the balance equations of O, O₂(a ¹), and O^– were taken from the literature as a function of the reduced electric fieldE/N forE/N=40–80 Td. A reasonable agreement is obtained between the model and the experiment with a set of 10 reactions for the production and destruction of the above-mentioned species     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

Utilization of a spiropyran derivative in a polymeric film optode for selective fluorescent sensing of zinc ion

Spiropyrans are the most studied families of func- tional materials due to their reversible structural con- version in response to external optical, chemical, and thermal stimulation[1]. Irradiation with ultraviolet light causes formation of an extended π-conjugation open form (merocyanine form) by heterolytic cleavage of the C (spiro)-O bond, which generates an intense ab- sorption in the visible region. Under the irradiating of visible light, the opened form will come back to the closed spi…     

以铜离子为模板的褐藻酸凝胶对铜离子的选择性富集研究

以铜离子为模板，制备了褐藻酸凝胶（Cu-alginate)，通过吸附实验及过柱渗滤实验，试验了该吸附剂对铜离子的选择性吸附性能，并且采用该吸附剂富集了自来水中微量的Cu^2 ，结合原子吸收法测定了水样中Cu^2 的含量。结果表明：该吸附剂对Cu^2 有较高的选择性吸附性能，显著优于一些化学合成铜离子模板缩聚物及非铜模板褐藻酸凝胶（如Ca-alginate),非重金属离子（如K^ 、Na^ 、Ca^2 ）及某些重金属离子（如Ni^2 、Cd^2 ）等对Cu^2 的吸附均不产生明显干扰。用该吸附剂富集水中的微量铜离子，回收率可达97.7%。     

Synthesis of New Lithium Ionic Conductor Thio-LISICON—Lithium Silicon Sulfides System

The new lithium ionic conductors, thio-LISICON (LIthium SuperIonic CONductor), were found in the ternary Li₂S-SiS₂-Al₂S₃ and Li₂S-SiS₂-P₂S₅ systems. Their structures of new materials, Li_4+xSi_1−xAl_xS₄ and Li_4−xSi_1−xP_xS₄ were determined by X-ray Rietveld analysis, and the electric and electrochemical properties were studied by electronic conductivity, ac conductivity and cyclic voltammogram measurements. The structure of the host material, Li₄SiS₄ is related to the γ-Li₃PO₄-type structure, and when the Li⁺ interstitials or Li⁺ vacancies were created by the partial substitutions of Al³⁺ or P⁵⁺ for Si⁴⁺, large increases in conductivity occur. The solid solution member x=0.6 in Li_4−xSi_1−xP_xS₄ showed high conductivity of 6.4×10^-4 S cm⁻¹ at 27°C with negligible electronic conductivity. The new solid solution, Li_4−xSi_1−xP_xS₄, also has high electrochemical stability up to ∼5 V vs Li at room temperature. All-solid-state lithium cells were investigated using the Li_3.4Si_0.4P_0.6S₄ electrolyte, LiCoO₂ cathode and In anode.     

Target-triggered inhibiting oxidase-mimicking activity of platinum nanoparticles for ultrasensitive colorimetric detection of silver ion

The development of efficient methods for the detection of hazardous and toxic elements is extremely important for environmental security and public health. In this work, we developed a facile colorimetric assaying system for Ag⁺ detection in aqueous solution. Chitosan-stabilized platinum nanoparticles (Ch-PtNPs) were synthesized and severed as an artificial oxidase to catalyze the oxidation of the substrate 3,3′,5,5′-tetramethylbenzidine (TMB) and generate color signal. In the presence of Ag⁺, due to the strong metallophilic interactions between Ag⁺ and Pt²⁺ on the surface of Ch-PtNPs, Ag⁺ can weaken the affinity to the substrates and inactivate the catalytic activity of Ch-PtNPs, leading to decreased absorbance signal to varying degrees depending on Ag⁺ amount. Combing the specific binding between Ch-PtNPs and Ag⁺ with signal amplification procedure based on the Ch-PtNPs-catalyzed TMB oxidation, a sensitive, selective, simple, cost-effective, and rapid detection method for Ag⁺ can be realized. Ag⁺ ions in tap and lake waters have been successfully detected. We ensured that the proposed method can be a potential alternative for Ag⁺ determination in environmental samples.     

Total synthesis of d-(+)-biotin

A total synthesis of d-(+)-biotin is described starting from d-(+)-glucosamine using acyliminium chemistry.     

Capillary Electrophoresis for the Simultaneous Determination of Metals by Using Ethylenediamine Tetraacetic Acid as Complexing Agent and Vancomycin as Complex Selector

A new separation system of capillary electrophoresis for the simultaneous determination of metals by using ethylenediamine tetraacetic acid （EDTA） as complexing agent and employing vancomycin as complex selector was described. The Z-shape cell capillary electrophoresis was used to enhance the sensitivity for the determination of the complexes of Cu（Ⅱ）, Ni（Ⅱ）, Co（Ⅱ） and Fe（Ⅲ） with EDTA. The partial filling method （co-current mode） was used in order to increase the selectivity of the electrophoretic method, meanwhile vancomycin was not present at the detector path during the detection of metal-EDTA complexes. The vancomycin concentration, phosphate concentration and pH of the buffer strongly influenced mobility, resolution and selectivity of the studied analytes. Under the optimal condition, the relative standard deviations （n=5） of the migration time and the peak area were less than 3.14% and 7.35%, respectively. Application of the Z-shape cell capillary electrophoresis method with UV detection and vancomycin loading led to the reliable determination of these metal ions in tap water and the recoveries were 97%-101%. The detection limits based on a signal to noise ratio of 3 ： 1 were found in the range of 2-10 μg·L^-1.