Basic Sequences in the Dual of a Fréchet Space

In this paper we study some properties of basic sequences in the dual of a Fréechet space. As a consequence we obtain that if E is a Fréechet space with the property that for each closed subspace F of E and each bounded subset B of E/F there is a bounded subset A of E with φ(A) = B, where φ denotes the canonical surjection of E onto E/F, then one of the following conditions is at least satisfied: 1. E is a Banach space, 2. E is a Schwartz space, 3. E is the product of a Banach space by ω. Finally, we also obtain some results concerning totally reflexive spaces.     

检验检测服务模式研究

检验检测服务模式发展滞后于检验检测行业发展的重要原因之一就是缺乏针对于服务模式的理论定义。采用概念分析法,以服务模式的定义和检验检测行业的服务特点为逻辑,研究了相关的代表性理论,认为服务模式主要由服务的基本要素和服务的商业模式两方面的内容组成,并深入探讨了检验检测的服务模式,提出了构建检验检测服务模式这一概念的重要意义。     

能力验证及其评价

The definitions, purposes and uses of proficiency testing and interlaboratory comparison were expounded in detail. Main types of proficiency testing were illustrated. Special emphases were made on the organization, practice and evaluation of the planning of proficiency testing. Related policies about proficiency testing given by the China National Accreditation Board for Laboratories （CNAL） were also briefly introduced.     

Thermally activated persulfate oxidation of Basic Fuchsin dye: Effect of different operating parameters,kinetic, and thermodynamic study

The present paper aims to investigate the efficiency of thermal activation persulfate in eliminating the organic dye “Basic Fuchsin” (BF). In addition, the study attempts to elucidate the effect of different operating parameters, such as persulfate dosage (0.44–4.4 mM), the initial solution pH of (3–10), and temperature (25–50°C), on the process. The effects of various anions and water matrices on BF discoloration were investigated. Thus, the findings revealed that 94.15% of BF can be eliminated using persulfate at a concentration of 4.4 mM and a temperature equal to 50°C. It occurs under the following operating conditions: oxidation time of 60 min, initial pH equal to 6, the pollutant concentration of 10 ppm, and stirring speed equal to 300 rpm. Furthermore, the kinetic study indicated that the degradation of the BF dye using PS followed a first-order pattern with rate constants varying within a range of 15.3 × 10⁻³–43.2 × 10⁻³ min⁻¹. Based on the Arrhenius equation, the activation energy of the studied process was determined to be 29 kJ mol⁻¹, suggesting that a moderate activation energy is required for BF discoloration. The results of the thermodynamic study confirm that the oxidation process is non-spontaneous and endothermic. Coexisting inorganic anions delayed BF discoloration to varying degrees, and the inhibitory action followed the following order: carbonate > chloride > sulfate > nitrate. Organic pollutants oxidation by the thermal activation of the persulfate is a simple and effective method for the depollution of waste textile water.     

光电经纬仪机电一体化耦合特性

区别于传统刚体控制模型,将结构动态设计方法与控制理论相结合,构建了光电经纬仪的柔性机电耦合控制模型,分析了该模型的结构基频、阻尼比等机械因素与控制带宽的耦合关系,并提出了光电经纬仪动态量化设计准则.实验表明:光电经纬仪结构谐振频率ω_n应尽可能地远大于系统谐振频率ω_r,至少满足ω_n≥3ω_r.该方法有效可行,可解决高精度大型经纬仪机电谐振问题,为设计快速响应、高跟踪精度的光电经纬仪提供了工程依据.     

Screening and optimization of highly effective ultrasound-assisted simultaneous adsorption of cationic dyes onto Mn-doped Fe3O4-nanoparticle-loaded activated carbon

The ultrasound-assisted simultaneous adsorption of brilliant green (BG) and malachite green (MG) onto Mn-doped Fe₃O₄ nanoparticle-loaded activated carbon (Mn-Fe₃O₄-NP-AC) as a novel adsorbent was investigated and analyzed using first derivative spectrophotometry. The adsorbent was characterized using FT-IR, FE-SEM, EDX and XRD. Plackett–Burman design was applied to reduce the total number of experiments and to optimize the ultrasound-assisted simultaneous adsorption procedure, where pH, adsorbent mass and sonication time (among six tested variables) were identified as the most significant factors. The effects of significant variables were further evaluated by a central composite design under response surface methodology. The significance of independent variables and their interactions was investigated by means of the analysis of variance (ANOVA) within 95% confidence level together with Pareto chart. Using this statistical tool, the optimized ultrasound-assisted simultaneous removal of basic dyes was obtained at 7.0, 0.02 g, 3 min for pH, adsorbent mass, and ultrasonication time, respectively. The maximum values of BG and MG uptake under these experimental conditions were found to be 99.50 and 99.00%, respectively. The adsorption process was found to be followed by the Langmuir isotherm and pseudo-second order model using equilibrium and kinetic studies, respectively. According to Langmuir isotherm model, the maximum adsorption capacities of the adsorbent were obtained to be 101.215 and 87.566 mg g⁻¹ for MG and BG, respectively. The value of apparent energy of adsorption obtained from non-linear Dubinin–Radushkevich model (4.348 and 4.337 kJ mol⁻¹ for MG and BG, respectively) suggested the physical adsorption of the dyes. The studies on the well regenerability of the adsorbent in addition to its high adsorption capacity make it promising for such adsorption applications.     

基于炉口火焰辐射测温的转炉终温预测研究

转炉炼钢的铁水终点温度是衡量铁水是否符合出钢要求的一个重要指标,目前仍主要依靠人工经验进行控制,其预测精度难以保证。为了能够有效的预测终点铁水的温度,并能满足不同的转炉炉口尺寸的要求,提出了一种基于炉口火焰温度测量的转炉终点铁水温度预测的新方法。利用可以采集可见光和近红外波段的微型光谱仪作为关键器件构建了炉口火焰辐射信息的采集系统,实现对转炉炼钢现场的炉口火焰辐射信息进行实时、有效的采集。同时综合考虑了炉口火焰的实际温度范围和现场的测量距离,通过改进的系统标定方法,对所构建的辐射信息采集系统进行标定,并利用双波长法获得了炉口火焰的辐射温度。鉴于炉口的火焰温度与炉内的铁水温度之间存在着一定的联系,还利用所测得的火焰温度以及与铁水温度相关的转炉吹炼过程参数,建立了基于支持向量机的炉内铁水温度的回归预测模型。对68炉现场采集到的转炉吹炼数据进行验证实验后表明该方法的预测精度要优于人工经验,且接近采用副枪的铁水温度测量方式,可为中小型转炉的终点温度预测提供一种有效可行的方案。     

Microwave propagation parameters in magnetic fluids

Complex dielectric permittivity and complex magnetic permeability measurements of two magnetic fluids (as microwave propagation media), in the approximate range 0.2-5GHz were performed. The two samples consisted of magnetite nanoparticles, dispersed in kerosene and in water, respectively. Based on the dielectric and magnetic measurements, the frequency (f ) dependence of the attenuation parameter, , the phase constant, , the propagation constant, , the intrinsic impedance, Z_m, the refractive index, n , the reflection coefficient, R , the wavelength, and the skin depth, , of the investigated samples were determined.     

《高等数学》CAI组件的研制

介绍了研制《高等数学》CAI组件的主导思想、主要内容及其特点,讨论了编程的主要技巧.     

Modified iron oxide nanoparticles as solid phase extractor for spectrophotometeric determination and separation of basic fuchsin

This study presents a novel separation, preconcentration and determination of basic fuchsin (BF) in an aqueous solution by sodium dodecyl sulfate (SDS)-bounded iron oxide nanoparticles (S-IONPs). It is shown that the novel magnetic nano-adsorbent is quite efficient for the adsorption and desorption of BF at 25 °C. Different parameters such as pH, temperature, ionic strength and composition of desorbent solvent were optimized. The effect of some co-existing ions on the determination was investigated. The nanoparticles were analyzed by transmission electron microscopy (TEM) and the sizes of S-IONPs were in the range of 20-100 nm. The method showed good linearity for the determination of BF in the range of 10-300 ng mL⁻¹ with a regression coefficient of 0.9989. The limit of detection (LOD) (signal-to-noise ratio of 3:1) was 0.0073 μg L⁻¹ and the relative standard deviation (RSD) for 0.03 μg mL⁻¹ and 0.2 μg mL⁻¹ of BF were 4.53% and 4.73%, respectively. The BF was determined successfully in spiked samples of Karoon River water.