Thermodynamics and Kinetics of Bacterial Cellulose Adsorbing Persistent Pollutant from Aqueous Solutions

The adsorption capability of bacterial cellulose(BC) for anionic dye acid fuchsine was studied. Meanwhile, the processes of the adsorption were investignted and fitted by adsorption isotherm models, adsorption thermodynamics and adsorption kinetics models, respectively. The changes of BC before and after adsorbing acid fuchsine were investigated via scanning electron microscopy(SEM) and Fourier transform infrared spectroscopy(FTIR) to further explain the adsorption mechanism. The results show that acid fuchsine could be effectively adsorbed by BC. The adsorption process was fitted well by Langmuir equation and the pseudo-second order kinetics, indicating that the adsorption process was monolayer molecule adsorption with the main action of chemical adsorption. The adsorption process was spontaneous and endothermic. Glucuronic acid groups and hydroxyl groups were responsible for the adsorption of acid fuchsine on BC.     

All-cellulose nanocomposites by surface selective dissolution of bacterial cellulose

All-cellulose nanocomposites using bacterial cellulose (BC) as a single raw material were prepared by a surface selective dissolution method. The effect of the immersion time of BC in the solvent (lithium chloride/N,N-dimethylacetamide) during preparation on the nanocomposite properties was investigated. The structure, morphology and mechanical properties of the nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, and tensile testing. The optimum immersion time of 10 min allowed the preparation of nanocomposites with an average tensile strength of 411 MPa and Young’s modulus of 18 GPa. With the longest immersion time of 60 min, the prepared composite sheet turns to express a very high toughness characteristic possessing a work-to-fracture as high as 16 MJ/m³. These biobased nanocomposites show high performances thanks to their unique structure and properties.     

Electrochemical attachment of motile bacterial cells to gold

Selective attachment of Escherichia coli K-12 bacterial cells to charged gold surfaces was demonstrated. Electrostatic binding of E. coli K-12 bacterial cells to positively charged surfaces was observed starting at +750 mV. The binding of E. coli K-12 cells to positively charged gold surfaces is proposed to occur due to long-range electrostatic interactions between the negatively charged O-chain of lipopolysaccharide (LPS) molecules protruding the bacterial cell body and the electrode surface. Removing LPS alters the cellular surface charge and results in cellular attachment to negatively charged surfaces. Thus, applying an electrical potential allows for the direct, real time detection of live, dead or damaged bacterial cells. The attachment of E. coli K-12 bacterial cells to surfaces with an applied potential substantiates the hypothesis that an electrostatic interaction is responsible for the binding of bacterial cells to positively charged molecular assemblies on surfaces used for building bacterial microarrays.     

Synthesis of L-Rhamnose and N -Acetyl-D-Glucosamine Derivatives Entering in the Composition of Bacterial Polysaccharides by Use of Glucansucrases

Transglucosylation reactions using sucrose as glucosyl donor and either N-acetyl-D-glucosamine, L-rhamnose, or methyl α -L-rhamnopyranoside as acceptors were carried out with recombinant glucansucrases from families 70 and 13 of glycoside-hydrolases. Depending on the enzyme specificity, various carbohydrate structures were synthesized and characterized including α -D-glucopyranosyl-(1 → 6)-N-acetyl-D-glucosamine, α -D-glucopyranosyl-(1 → 4)-N-acetyl-D-glucosamine, α -D-glucopyranosyl-(1 → 1)-β -L-rhamnopyranoside, α -D-glucopyranosyl-(1 → 4)-α -D-glucopyranosyl-(1 → 1)-β -L-rhamnopyranoside, methyl α -D-glucopyranosyl-(1 → 4)-α -L-rhamnopyranoside, and methyl α -D-glucopyranosyl-(1 → 3)-α -L-rhamnopyranoside. Disaccharides were obtained with yields going up to 64%. The structural diversity generated as well as the obtained yields appear to be related to enzyme active site architecture, which can be modulated and improved by enzyme engineering. Several of the obtained disaccharides enter in the composition of surface polysaccharides of pathogenic bacteria, among which is Shigella flexneri. Our results outline the potential of glucansucrases in the chemo-enzymatic synthesis of complex carbohydrates of biological interest whose chemical synthesis may be seen as a limitation.     

细菌纤维素纳米纤维稳定乳液的性能

采用超声和高压均质两种方式分散的细菌纤维素(BC)悬浮液制备了BC纳米纤维稳定的水包油型Pickering乳液, 并考察了纤维用量、 pH值和机械分散方式对乳液稳定性的影响. 结果表明, 乳液的稳定性随纳米纤维用量的增加而增加; 碱性条件比酸性条件制备的乳液稳定性高, 且在pH=12时达到最高. 用高压均质方式分散的BC稳定乳液的效果优于采用超声方式分散的BC的效果, 这是由于高压均质后的纤维较短, 可以提供更多的纳米纤维稳定乳液. 计算结果表明, BC纳米纤维在液体石蜡/水界面上的三相接触角为72.5°, 说明BC适合稳定水包油型乳液.     

Comblike poly(ethylene oxide)/hydrophobic C6 branched chitosan surfactant polymers as anti-infection surface modifying agents

A series of structurally well-defined poly(ethylene oxide)/hydrophobic C₆ branched chitosan surfactant polymers that undergo surface induced self assembly on hydrophobic biomaterial surfaces were synthesized and characterized. The surfactant polymers consist of low molecular weight (M_w) chitosan backbone with hydrophilic poly(ethylene oxide) (PEO) and hydrophobic hexyl pendant groups. Chitosan was depolymerized by nitrous acid deaminative cleavage. Hexanal and aldehyde-terminated PEO chains were simultaneously attached to low M_w chitosan hydrochloride via reductive amination. The surfactant polymers were prepared with various ratios of the two side chains. The molecular composition of the surfactant polymers was determined by FT-IR and ¹H NMR. Surface active properties at the air–water interface were determined by Langmuir film balance measurements. The surfactant polymers with PEO/hexyl ratios of 1:3.0 and 1:14.4 were used as surface modifying agents to investigate their anti-infection properties. E. coli adhesion on Silastic^® surface was decreased significantly by the surfactant polymer with PEO/hexyl 1:3.0. Surface growth of adherent E. coli was effectively suppressed by both tested surfactant polymers.     

Recent advancement and development of chitin and chitosan-based nanocomposite for drug delivery: Critical approach to clinical research

This review depicts the exposure of chitin and chitosan base multifunctional nanomaterial composites for promising applications in field of biomedical science structure, synthesis as well as potential application from a colossal angle. We elaborated critically each of the chitin and chitosan base nanomaterial with its potential application toward biomedical science. For different biomedical applications it use in form of hydrogels, microsphere, nanoparticles, aerogels, microsphere and in form of scaffold. Due to this it had been blended with different polymer such as starch, cellulose, alginate, lipid, hyaluronic acid, polyvinyl alcohol and caboxymethyl cellulose. In this review article, a comprehensive overview of combination of chitin and chitosan base nanomaterial with natural as well as synthetic polymers and their biomedical applications in biomedical field involving drug delivery system all the technical scientific issues have been addressed; highlighting the recent advancements.     

Brazilian integrated sugarcane-soybean biorefinery: Trends and opportunities

1. Download : Download high-res image (162KB)
2. Download : Download full-size image

     

Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose

Cellulose acetate (CA) is one of the most important cellulose derivatives and its main applications are its use in membranes, films, fibers, plastics and filters. CAs are produced from cellulose sources such as: cotton, sugar cane bagasse, wood and others. One promissory source of cellulose is bacterial cellulose (BC). In this work, CA was produced from the homogeneous acetylation reaction of bacterial cellulose. Degree of substitution (DS) values can be controlled by the acetylation time. The characterization of CA samples showed the formation of a heterogeneous structure for CA samples submitted to a short acetylation time. A more homogeneous structure was produced for samples prepared with a long acetylation time. This fact changes the thermal behavior of the CA samples. Thermal characterization revealed that samples submitted to longer acetylation times display higher crystallinity and thermal stability than samples submitted to a short acetylation time. The observation of these characteristics is important for the production of cellulose acetate from this alternative source.     

Surface acetylation of bacterial cellulose

Bacterial cellulose was partially acetylated by the fibrous acetylationmethod to modify its physical properties, while preserving the microfibrillarmorphology. The overall degree of substitution was varied from 0.04 to 2.77 bychanging the amount of acetic anhydride added. X-ray diffraction of thepartially acetylated samples showed the crystalline pattern of unmodified celluloseI up to moderate degrees of acetylation, and the change in peak widthsindicatedthat acetylation proceeded from the surface of microfibrils, leaving the coreportion unreacted. Scanning electron microscopy revealed that even low levelsofacetylation were effective to maintain the original microfibrillar morphologyofbacterial cellulose on direct drying from water.