空孔与运动裂纹相互作用的动焦散线实验研究

为研究预制裂纹不同偏移距离时运动裂纹与空孔的相互作用规律,采用动态焦散线实验系统,将预制裂纹的偏移距离设定为唯一变量,对含空孔的有机玻璃(PMMA)试件进行冲击三点弯实验。研究表明,存在两个临界距离：（6 mm (2 R )、9 mm (3 R )）,在该偏移距离下,裂纹扩展轨迹、动态断裂特性发生显著改变：(1) 预制裂纹偏移距离不大于3 mm时,裂纹贯穿空孔,发生二次起裂,且二次起裂的速度与应力强度因子显著大于一次起裂,无偏移时裂纹轨迹的分形维数为最小值;(2) 偏移距离增大至6 mm时,裂纹不再贯穿空孔,空孔对裂纹先吸引后排斥,裂纹速度与应力强度因子先减小后增大,裂纹轨迹的分形维数达到最大值;(3) 偏移距离大于6 mm时,空孔对裂纹的吸引作用逐渐减小,大于9 mm后,空孔对裂纹的吸引不再显著,裂纹起裂后即向落锤加载方向扩展直至贯穿试件。

     

基于实测爆破振动计算岩体介质P波品质因子

爆破地震波传播衰减研究对爆破振动预测及安全控制有着重要的指导意义。针对爆破振动实测信号,结合P波、S波的初至识别结果,计算P波、S波在岩体中的传播速度及P波的上升时间,进一步得出岩体介质P波品质因子。结合现场实测振动数据,计算丰宁抽水蓄能电站及舟山绿色石化基地试验区域内岩体介质P波品质因子,计算结果分别为19.02和14.07。结果表明,通过实测地表爆破振动计算得到的P波品质因子远小于经验公式的计算值及一般原岩的品质因子,说明地表疏松层对爆破地震波的传播衰减有较大影响。

     

宇宙线研究进展评述与展望

近年来,宇宙线探测技术发展迅速,天基和地基宇宙线实验均取得了多项重要成果,打破了宇宙线研究领域多年来的沉寂．多手段复合观测是精确测量宇宙线能谱和成分的必要途径,甚高能伽玛射线天文学成为探索宇宙线起源这一世纪之谜的最有效手段．高海拔宇宙线观测站(LHAASO)计划将以最高的超高能伽玛射线探测灵敏度和甚高能伽玛射线巡天灵敏度以及最宽的宇宙线能量覆盖范围探索领域的基本问题．     

乙烯基单体正离子聚合中链增长速率常数的研究进展

碳正离子聚合中,聚合速率常数的测定方法通常包括电导法、绝热量热法、胺抑制法、止流光谱法及扩散计时法。在烷基乙烯基醚、苯乙烯及其衍生物和异丁烯等几种常见乙烯基单体的正离子聚合中,本文介绍不同测定方法得到的不同结构碳正离子(包括自由离子和离子对)的链增长速率常数(kp 和kp±)。     

Ⅲ型弹粘塑性/刚性界面裂纹的定常扩展裂尖场

考虑裂纹尖端的奇异性和粘性效应,建立了双材料界面扩展裂纹尖端的弹粘塑性控制方程．引入界面裂纹尖端的位移势函数和边界条件,对刚性-弹粘塑性界面Ⅲ型界面裂纹进行了数值分析,求得了界面裂纹尖端应力应变场,并讨论了界面裂纹尖端场随各影响参数的变化规律．计算结果表明,粘性效应是研究界面扩展裂纹尖端场时的一个主要因素,界面裂纹尖端为弹粘性场,其场受材料的粘性系数、Mach数和奇异性指数控制．     

基于遗传算法的近红外光谱橄榄油产地鉴别方法研究

提出了一种应用近红外光谱技术快速无损鉴别橄榄油产地的新方法。采用近红外光谱仪获取三种不同产地的橄榄油各30个样本的光谱漫反射特征曲线,利用全局搜索算法-遗传算法提取特征波长,即从光谱751个波长数据提取9个特征波长数据,并将其作为主成分分析法的输入变量,运用主成分分析法建立分析校正模型。结果表明,主成分1和2累计可信度已达99.130%,对不同产地的橄榄油有很好的聚类作用,同时也说明遗传算法抽取特征波长方法正确。将提取到的六种主成分作为BP神经网络的输入变量,品种类型作为神经网络的输出变量,建立3层人工神经网络模型,对30个未知橄榄油产地进行预测,预测结果准确率达100％。该方法能快速无损地检测橄榄油产地,同时也为其他油类产地鉴别提供了一种新方法。     

Investigation of limitations of optical diffraction tomography

Optical diffraction tomography (ODT) applied to measurement of optical microelements is limited by low dynamic range, i.e., only objects with small deviations of refractive-index distribution can be measured. Therefore in this paper the limitations and errors of ODT are investigated throughout extensive numerical experiments. It is shown that these errors can be reduced by introduction of additional numerical focusing in the tomographic reconstruction algorithm. Additionally, new tomographic reconstruction algorithm using back propagation in reference medium for optical microelements measurement with known design is proposed. This hybrid reconstruction algorithm allows significant extension of ODT applicability in measurement of elements having large deviations of refractive-index distribution.     

The 3D characteristics of post‐traumatic syringomyelia in a rat model: a propagation‐based synchrotron radiation microtomography study

Many published literature sources have described the histopathological characteristics of post‐traumatic syringomyelia (PTS). However, three‐dimensional (3D) visualization studies of PTS have been limited due to the lack of reliable 3D imaging techniques. In this study, the imaging efficiency of propagation‐based synchrotron radiation microtomography (PB‐SRµCT) was determined to detect the 3D morphology of the cavity and surrounding microvasculature network in a rat model of PTS. The rat model of PTS was established using the infinite horizon impactor to produce spinal cord injury (SCI), followed by a subarachnoid injection of kaolin to produce arachnoiditis. PB‐SRµCT imaging and histological examination, as well as fluorescence staining, were conducted on the animals at the tenth week after SCI. The 3D morphology of the cystic cavity was vividly visualized using PB‐SRµCT imaging. The quantitative parameters analyzed by PB‐SRµCT, including the lesion and spared spinal cord tissue area, the minimum and maximum diameters in the cystic cavity, and cavity volume, were largely consistent with the results of the histological assessment. Moreover, the 3D morphology of the cavity and surrounding angioarchitecture could be simultaneously detected on the PB‐SRµCT images. This study demonstrated that high‐resolution PB‐SRµCT could be used for the 3D visualization of trauma‐induced spinal cord cavities and provides valuable quantitative data for cavity characterization. PB‐SRµCT could be used as a reliable imaging technique and offers a novel platform for tracking cavity formation and morphological changes in an experimental animal model of PTS.     

Prediction-step staggered-in-time FDTD: An efficient numerical scheme to solve the linearised equations of fluid dynamics in outdoor sound propagation

The finite-difference time-domain (FDTD) method to solve the linearised equations of fluid dynamics has shown to be very powerful and useful in outdoor sound propagation. Practical applications are however limited due to the large need for computational resources. The numerical discretisation influences computational efficiency to an important degree. In this paper, some possible ways to discretise temporal derivatives are studied. Two obvious ways of time-discretisation namely staggered-in-time (SIT) and a simple collocated-in-time (CIT) scheme are compared to the prediction-step staggered-in-time (PSIT) scheme. The latter is intended to be used for the calculation of sound propagation in the typical low wind speeds encountered in the outdoor environment at low heights above the earth’s surface. It was shown that the PSIT scheme is more stable than the SIT scheme, so practical calculations are possible. Computational efficiency is increased to an important degree compared to the CIT scheme. The numerical accuracy (more precisely the amplitude error) of the PSIT scheme is an important improvement upon SIT. The CIT scheme on the other hand conserves amplitude better. The amplitude error becomes larger with increasing wind speed because of some simplifications during the numerical discretisation. In low wind speeds, the PSIT algorithm can serve as an interesting compromise between numerical accuracy and the required amount of computing power.     

LM-BP神经网络应用于光度法同时测定邻苯二酚、间苯二酚和对苯二酚三组分

应用人工神经网络原理,以Levenberg-marquardt back propagation(LM-BP)算法,对光谱严重重叠的邻苯二酚、间苯二酚和对苯二酚3组分进行同时测定。挑选283.5, 279.5, 276.5 nm处3波长为3种苯二酚的测量波长,按正交设计表L₂₅(56)配置25组标准混合溶液,对3种苯二酚进行训练,平均平方误差(MSE)达到最小值0.083 114 3;同时预测了模拟混合样本中的邻苯二酚、间苯二酚和对苯二酚含量,3种苯二酚异构体在低浓度时误差稍大,绝大部分分析结果相对误差小于5%,特别是对吸收光谱严重重叠的邻苯二酚、间苯二酚有令人满意的分析结果。