Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Glycopolymeric inhibitors of β‐glucuronidase. III. Configurational effects of hydroxy groups in pendant glyco‐units in polymers upon inhibition of β‐glucuronidase

Two kinds of new glycopolymers, (P(VB‐1‐GlcaH‐co‐AAm), 9 ) and (P(VB‐1‐Glco‐co‐AAm), 10 ), were synthesized through the radical copolymerization of styrene derivatives bearing pendant D ‐glucaric and D ‐gluconic moieties, N‐(p‐vinylbenzyl)‐1‐D ‐glucaramide (VB‐1‐GlcaH, 7 ), and N‐(p‐vinylbenzyl)‐D ‐gluconamide (VB‐1‐Glco, 8 ), with acrylamide (AAm). Glycopolymer 9 bearing the pendant glucaric moiety at the first position inhibited the hydrolysis of a model compound for xenobiotics‐β‐glucuronide conjugates, p‐nitrophenyl β‐D ‐glucuronide, uncompetitively, in contrast to the competitive inhibition in the presence of the corresponding isomeric glycopolymer bearing the pendant D ‐glucaric unit at the sixth position (P(VB‐6‐GlcaH‐co‐AAm), 3 ) reported in our previous article. On the other hand, another copolymer 10 bearing the gluconic moiety was found not to inhibit the hydrolysis as well as the corresponding copolymer bearing pendant gulonic unit (P(VB‐6‐Glco‐co‐AAm), 4 ). These results indicate that the hydrolysis is influenced not only by existence of pendant carboxyl units but also by the direction on the linkage of the glyco‐units to the polymer frame. Therefore the configurational position of hydroxy groups in pendant glyco‐units in macromolecular inhibitors may be essential for the interaction with β‐glucuronidase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4895–4903, 2006     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Comparative kinetics of phospholipase A2 action on liposomes and monolayers of phosphatidylcholine spread at the air-water interface

A detailed kinetic model describing the surface transformation of spread liposomes along with their enzymatic hydrolysis was developed. The model was applied to the hydrolysis of the long-chain phosphatidylcholine generating reaction products which remain at the interface and to medium-chain substrates from which the products desorb rapidly into the bulk phase. The overall kinetic constants of the hydrolysis in liposomal systems were compared with those obtained with monolayers under barostatic conditions. The values of the interfacial Michaelis-Menten constant were estimated.     

基于褐藻酸钠-纳米金复合物作非酶标记的新型电化学免疫传感器的研制

比较了用三碘甲状腺氨酸抗体(T3抗体)、褐藻酸钠(AS)标记T3抗体及褐藻酸钠-纳米金复合物(ASN)标记的T3抗体,在通过免疫反应结合到免疫电极表面后,引起的电极表面微环境发生改变的程度;用Fe(CN)3-/4-6为电化学探针,用循环伏安法获取金电极表面微环境改变的电流信息来检测 T3抗体,检测的线性范围为100～1 600ng·ml-1,检出限为45ng·ml-1.     

Solid state reactions of nitrogenous heterocyclic compounds(Ⅰ)——Solid state reactions of 3-methyl-l-phenyl-5-pyrazolone with carbonyl compounds

The solid state reaction of 3-methyl-1-phenyl-5-pyrazolone (MPP) with aromatic aldehydes and ke-tones benzil derivatives and imides,and the solid state Michael addition reaction of MPP with 4-arylidene-3-methyl-1-phenyl-5-pyrnzolone 2 were investigated.Some new solid state reactions between the reactants were found,from which a series of new compounds were obtained The structures of the products were identified by IR,1H NMR,MS,elemental analyses and also by X-ray crystal analysis,and the reaction mechanism of MPP with aromatic aldehydes and ketones was proposed     

Fermi and Coulomb correlations in the 21 S state of the helium isoelectronic sequence

The Fermi and Coulomb holes of the 2¹ S state of the helium isoelectronic sequence are investigated. Several interesting differences between the results obtained and those which might be expected on the basis of the corresponding 2³ S state are pointed out and discussed.     

A Study of Amorphous Precursors for PbZrO3-PbTiO3 Based Ceramic Materials

Amorphous precursors for PbZrO₃ and PbTiO₃ ceramics were prepared from lead acetate and the transition metaln-propoxide inn-propanol orn-butoxide inn-butanol and hydrolysed with an excess of water. According to GLC and TGA/EGA analyses, the type of alkoxide group influences distinctly the structure of heterometallic precursors, i.e., oxo or acetate bridging, and the amounts of hydroxyl and organic groups bound to the metal network. The local environments of metal atoms in the amorphous precursors were also studied by EXAFS. The analysis reveals that in Pb−Zr precursors alkoxide groups modify the coordination spheres of the zirconium atoms. Conversely, local environments of both lead and titanium atoms within the analysed range of 3.4 A depend weakly on the type of alkoxide used.     

Mixing properties of mim diodes in the infrared

Point contact MIM diodes of different materials have been tested as harmonic mixers at 29 THz and 88 THz. From the analysis of the I-V static characteristic quantitative informations have been obtained about the effectiveness of the diodes as high order mixers.