Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Synthesis and thermal decomposition of bismuth peroxotitanate to Bi2Ti2O7

Bi-peroxotitanate was synthesized by a peroxo method and after thermal decomposition Bi₂Ti₂O₇ was obtained. DTA, TG and DSC curves of Bi₂[Ti₂(O₂)₄(OH)₆]5H₂O were recorded and used to determine isothermal conditions suitable for obtaining the intermediate samples corresponding to the phases observed during the thermal decomposition. The samples were identified by quantitative analysis, IR spectroscopy and X-ray analysis. The experimental results were used to propose a mechanism of thermal decomposition of the investigated compound to a nanosized Bi₂Ti₂O₇. The optimum conditions were also determined for obtaining Bi₂Ti₂O₇, which is applicable for piezosensors.     

Steroid polyols from the Far-Eastern starfish Henricia sanguinolenta

A new polyhydroxylated steroid (20R,24S)-5-cholestane-3,6,15,24-tetraol and a known glycoside, laeviuscoloside G, was isolated from the Far-Eastern starfish Henricia sanguinolenta, collected in the sea of Okhotsk, and characterized.     

Direct Electrochemistry of Multi‐Copper Oxidases at Carbon Nanotubes Noncovalently Functionalized with Cellulose Derivatives

This study describes the direct electron transfer of multi‐copper oxidases, i.e., laccase (from Trametes versicolor) and bilirubin oxidase (BOD, from Myrothecium verrucaria) at multiwalled carbon nanotubes (MWNTs) noncovalently functionalized with biopolymers of cellulose derivatives, i.e., hydroxyethyl cellulose (HEC), methyl cellulose (MC), and carboxymethyl cellulose (CMC). The functionalization of the MWNTs with the cellulose derivatives is found to substantially solubilize the MWNTs into aqueous media and to avoid their aggregation on electrode surface. Under anaerobic conditions, the redox properties of laccase and BOD are difficult to be defined with cyclic voltammetry at either laccase/MWNT‐modified or BOD/MWNT‐modified electrodes. The direct electron transfer properties of laccase and BOD are thus studied in terms of the bioelectrocatalytic activities of the laccase/MWNT‐modified and BOD/MWNT‐modified electrodes toward the reduction of oxygen and found to be facilitated at the functionalized MWNTs. The possible application of the laccase‐catalyzed O₂ reduction at the laccase/MWNT‐modified electrode is illustrated by constructing a CNT‐based ascorbate/O₂ biofuel cell with the MWNT‐modified electrode as the anode for the oxidation of ascorbate biofuel.     

Die Reaktion von SeCl4 mit Übergangsmetalltetrachloriden. Synthese und Kristallstrukturen von (SeCl3)2MCl6 mit M = Zr,Hf, Mo,Re

The Reaction of SeCl₄ with Transition Metal Tetrachlorides. Synthesis and Crystal Structures of (SeCl₃)₂MCl₆ with M = Zr, Hf, Mo, Re The transition metal tetrachlorides ZrCl₄, HfCl₄ and MoCl₄ react with SeCl₄ in closed ampoules at temperatures of 140°C to (SeCl₃)₂MCl₆ (M = Zr, Hf, Mo) which are all isotypic and crystallize in the (SeCl₃)₂ReCl₆ structure type (orthorhombic, Fdd2, Z = 8, lattice constants for M = Zr: a = 1165.7(1)pm, b = 1287.2(2)pm, c = 2180.2(2)pm; for M = Hf: a = 1162.9(2)pm, b = 1285.0(2)pm, c = 2178.2(3)pm; for M = Mo: a = 1153.8(1)pm, b = 1267.7(1)pm, c = 2147.4(2)pm). The Cl^? ions form a hexagonal closest packing with one fourth of the octahedral holes filled by Se⁴⁺ and M⁴⁺ in an ordered way. The MCl₆ octahedra are regular, the SeCl₆ octahedra are distorted with 3 short and 3 long Se? Cl bonds (mean 215 pm and 287 pm). The structures can thus be regarded as built of SeCl₃⁺ and MCl₆^2? ions. Magnetic susceptibility measurements show for M = Zr the expected diamagnetic behavior, for M = Mo and Re paramagnetic behavior according to the Curie-Weiss law with magnetic moments of 2.5 B. M. for M = Mo and 3.7 B. M. for M = Re corresponding to 2 and 3 unpaired electrons respectivly.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

Synthesis of bis(alk-3-en-1-ynyl)benzene with either E- or Z-configuration via a one-pot three-component coupling reaction and its optical properties

A convenient, efficient and stereoselective synthesis of a range of bis(alk-3-en-1-ynyl)benzenes with E- and Z-configuration is described. The protocol involves Cu-mediated cross-coupling reaction of (E)- and (Z)-alk-1-enyldisiamylboranes with (trimethylsilyl)ethynyl bromide and Pd/Cu-catalyzed cross-coupling reaction with diiodobenzene. The sequential cross-coupling reaction proceeds readily under extremely mild conditions in a one-pot manner to afford bis(alk-3-en-1-ynyl)benzenes in good to excellent yields. The optical properties of the products are also described.     

4-Hydroxy-2-quinolones. 122. 1-Hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-<Emphasis Type="Italic">ij</Emphasis>]-quinoline-2-carboxylic acid hetarylamides as potential antitubercular agents

An improved method is reported for the synthesis of a series of 1-hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-ij]quinoline-2-carboxylic acid hetarylamides. The antitubercular activity of all of the compounds prepared has been studied. The structure-biological activity dependence revealed is discussed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1023–1033, July, 2007.