火花通道长度对激光触发开关特性的影响

利用超高速相机,在曝光时间100 ns时,对不同能量下激光在氮气气体开关中形成的火花通道进行拍照,得到了不同焦距下激光波长266 nm时激光火花通道长度与激光能量的关系。开展了激光触发气体火花开关的实验研究,激光触发开关延时、抖动随激光能量的增加而减小。将火花通道长度与激光触发开关的特性进行了分析,气体开关的抖动随着激光火花通道长度的增加而减小,当火花通道沿电极间轴向长度达到开关电极间距40%时,开关的抖动为亚ns量级。     

First experimental research of the bunch compressor at CAEP

Magnetic bunch compressor is one of the key technologies on the path to next generation accelerator driven facilities. In this paper we report the design principles and the first experimental research of the bunch compressor developed at Chinese Academy of Engineering Physics （CAEP）. The length of the bunch after compressor is found to be about 0.7 ps （rms） and the peak current exceeds 500 A when operated in the optimized condition. The sensitivity of the bunch length on the phase of the acceleration field and magnetic field of the bunch compressor was also measured and analyzed.     

QGP tomography with photon tagged jets in ALICE

γ＋jet events provide a tomographic measurement of the medium formed in heavy ion collisions at LHC energies.Tagging events with a well identified high p T direct photon and measuring the correlation distribution of hadrons emitted oppositely to the photon in ALICE,allows us to determine,with a good approximation,both the jet fragmentation function and the back-to-back azimuthal alignment of the direct photon and the jet.Comparing these two observables measured in pp collisions with the ones measured in AA collisions will reveal the modifications of the jet structure induced by the medium formed in AA collisions and consequently will infer the medium properties.     

Controlled Dense Coding with Symmetric State

Two schemes, introducing the projective operator and the auxiliary qubit respectively, for controlled dense coding are investigated by using a three-qubit symmetric state with entanglement, where the supervisor (Cliff) can control an average amount of information transmitted from the sender (Alice) to the receiver (Bob) by adjusting the measurement angle θ. We show that the results for the average amounts of information are unique from the different two schemes. The schemes may be extended to many-qubit systems.     

Scattering of an arbitrarily oriented dipole field by an infinite and a finite length PEMC circular cylinder

Electromagnetic scattering from an infinite and a finite length PEMC circular cylinder, illuminated by an arbitrarily oriented dipole, is investigated theoretically. An electric dipole as a source of excitation is considered first, and then a magnetic dipole as a source of excitation is treated. In contrast to the case of an axially directed dipole, it is shown that no additional terms are needed to incorporate the cross-polarized component of the field for the case of radial and circumferential dipoles. Numerical verifications are presented to verify the validity of derived results and numerical code by comparing results with the published literature.      

基于同时的相对性对钟慢尺缩效应的再认识

同时的相对性、钟慢效应和尺缩效应是狭义相对论时空观的主要内容.鉴于同时性是时空测量的基础,本文从同时的相对性出发详述了对钟慢效应和尺缩效应的再认识:钟慢效应是运动时钟走时率变慢和校表问题的综合表现,其实质是同时的相对性在时间量度上的直接反映;尺缩效应的实质是同时的相对性在空间量度上的反映,也是不同观测者对同一客观事实的不同时空描述.     

晶粒棱长、尺寸与拓扑学特征之间关系的Monte Carlo仿真研究

采用Potts模型Monte Carlo方法研究了晶粒棱长、尺寸与拓扑学特征之间的统计关系.结果表明,晶粒棱长与晶粒面数之间呈线性统计关系,并且平均N面体晶粒模型和Poisson-Voronoi组织均支持该结论.不同时刻的晶粒长大仿真数据表明,在准稳态晶粒长大阶段晶粒棱长的分布具有自相似性.个体晶粒的平均棱长随晶粒面数（或晶粒尺寸）的增加而逐渐增大,这说明一些理论模型中采用的“不同面数的晶粒平均棱长均相等”的假设具有局限性.仿真数据和纯铁实验数据均表明,晶粒尺寸与晶粒面数之间的统计关系表现为一条单调递增的凸曲线. 关键词： 晶粒棱长 晶粒尺寸 拓扑学 Monte Carlo仿真     

Asymptotic-Preserving Particle-In-Cell method for the Vlasov–Poisson system near quasineutrality

This paper deals with the numerical resolution of the Vlasov–Poisson system in a nearly quasineutral regime by Particle-In-Cell (PIC) methods. In this regime, Classical PIC methods are subject to stability constraints on the time and space steps related to the small Debye length and large plasma frequency. Here, we propose an “Asymptotic-Preserving” PIC scheme which is not subjected to these limitations. Additionally, when the plasma period and Debye length are small compared to the time and space steps, this method provides a consistent PIC discretization of the quasineutral Vlasov equation. We perform several one-dimensional numerical experiments which provide a solid validation of the method and its underlying concepts, and compare the method with Classical PIC and Direct-Implicit methods.     

Numerical analysis of birefringence and coupling length on dual-core photonics crystal fiber with complex air holes

A type of high birefringence dual-core photonic crystal fibers (DC-PCFs) with a central row of elliptical air holes have been proposed. The transverse electric field vector distributions of the two modes are evaluated, the birefringence or coupling length with the different parameters is numerically analyzed based on finite-element method. The numerical results show values for the birefringence of 8.247 × 10⁻³ (for wavelength, λ = 1.5 μm and lattice length, Λ = 1.3 μm), and for the coupling lengths about 3.1 mm and 2.6 mm (λ = 1.5 μm and Λ = 1.5 μm) to modes of x and y polarized, respectively. With the increasing of the air-filling fraction in proposed DC-PCF, the coupling length becomes longer and the birefringence becomes higher.     

Hidden Markov models revealing the stress field underlying the earthquake generation

The application of the hidden Markov models (HMMs) is attempted for revealing key features for the earthquake generation which are not accessible to direct observation. Considering that the states of the HMM correspond to levels of the stress field, our objective is to identify these states. The observations are considered after grouping earthquake magnitudes and the cases of different number of states are examined. The problems of HMMs theory are solved and the ensuing HMMs are compared on the basis of Akaike and Bayesian information criteria. A new insight on the evaluation of future seismic hazard is given by calculating the mean number of steps for the first visit to a particular state, along with the respective variance. We further calculate an estimator of the mean number of steps for the first visit to a particular state and we construct its confidence interval. Additionally, a second approach to the problem is followed by assuming a different determination of observations. The HMMs applied to both approaches, contribute significantly to seismic hazard assessment via revealing the number of the stress levels as well as the way in which these levels are associated with certain earthquake occurrence.