碳钢的高应力冲击磨损行为研究

在高应力冲击磨损条件下，金属材料的磨损表面很容易形成硬度很高（ＨＶ≥１０００）的白层．采用新的试验方法，研究了碳钢在高应力冲击条件下的磨损特征，并且从分析白层的结构出发，讨论了白层的形成机制和失效模式．结果表明，材料的高应力冲击磨损质量损失与冲击次数之间具有线性关系，韧性较好的低碳钢的耐磨性比高碳钢的好，原因是硬度越高，白层在磨损过程中越容易发生剥层与剥落．白层是一种高度塑性变形层，其内部精细结构的变形特征证实了白层的塑性变形机制     

带加法白噪声的随机Boussinesq方程组的解的渐近行为

考虑速度和温度同时在加法白噪声扰动下的随机Boussinesq方程组的解的渐近特征.可以接轨道得到该随机方程组的唯一解,并可以验证该解生成随机动力系统,进而证明了该随机动力系统存在随机吸引子.     

固态照明光源的基石--氮化镓基白光发光二极管

首先回顾了照明光源的简单历史 ,然后介绍了发光二极管 (LED)发展到大功率白光LED的历史 ,接着简述了国内外发展现状 ,主要技术路线及其特点 .最后阐述了作者在这方面的研究工作进展状况 ,对其发展趋势提出了一些看法 .     

基于白光干涉彩色图像的微结构表面形貌测量

微结构的表面形貌会显著地影响微纳器件的使用性能及产品质量,是微纳测试领域的一个重要研究方面,利用白光干涉技术是测量物体表面形貌的一种常见方法。区别于常用的CCD黑白相机,使用CCD彩色相机采集白光干涉条纹的彩色图像,使获取的图像包含了R、G、B三个通道的信息。利用小波变换法分别求解出在不同扫描位置处R、G、B通道的相位信息,通过建立的评价函数,并结合最小二乘法可精确确定零光程差的位置,利用相对高度和零光程差位置的线性关系,进而得到物体的表面形貌。通过仿真以及实际测量由VLSI标准公司制造的标准台阶结构,验证了所提出方法的有效性。     

光程变化对基于近红外光谱的黄酒品质检测的影响

以绍兴酒为研究对象,利用近红外光谱分析技术和化学计量学分析方法,开展了光程变化对基于近红外光谱的黄酒品质检测影响的研究,建立了黄酒酒精度、糖度和pH值3个品质指标的分析模型.通过比较0.5,1,1.5,2,2.5和3 mm 6个不同光程,并比较原始光谱、一阶微分光谱和二阶微分光谱三种光谱预处理方式对模型性能的影响,确定了这3个指标的最佳检测方式.黄酒酒精度和pH的最佳检测方式为:光程2 mm,采用偏最小二乘回归结合原始光谱;糖度的最佳检测方式为光程1mm,采用偏最小二乘回归结合原始光谱.这一研究表明光程变化对基于近红外光谱的黄酒品质检测有影响,选择合适的光程能够有效地提高检测精度.     

Efficient top-emitting white organic light emitting device with an extremely stable chromaticity and viewing-angle

In this paper,we report on the fabrication of a top-emitting electrophosphorescent p-i-n white organic lightemitting diode on the basis of a low-reflectivity Sm/Ag semi-transparent cathode together with a thickness-optimized ZnS out-coupling layer.With a 24-nm out-coupling layer,the reflectivity of the cathode is reduced to 8% at 492 nm and the mean reflectivity is 24% in the visible area.By introducing an efficient electron blocking layer tris(1phenylpyrazolato,N,C2 ’)iridium(III)(Ir(ppz) 3) to confine the exciton recombination area,the current efficiency and the colour stability of the device are effectively improved.A white emission with the Ir(ppz) 3 layer exhibits a maximum current efficiency of 9.8 cd/A at 8 V,and the Commission Internationale de L’Eclairage(CIE) chromaticity coordinates are almost constant during a large voltage change of 6 V-11 V.There is almost no viewing angular dependence in the spectrum when the viewing angle is no more than 45,with a CIE x,y coordinate variation of only(±0.0025,±0.0008).Even at a large viewing angle(75),the CIE x,y coordinate change is as small as(±0.0087,±0.0013).     

Natural color low-level-light EBAPS imaging system based on three-color LCTF北大核心CSCD

The high-sensitivity electron bombarded active pixel sensor (EBAPS) not only has the characteristics of high gain and high sensitivity of vacuum imaging devices, but also has the digital characteristics of solid-state imaging devices, which greatly improves the level of night vision imaging. A natural color low-level-light EBAPS imaging system was built based on three-color liquid crystal tunable filter (LCTF). According to the characteristics of low-level-light images, the color enhancement processing such as grayscale stretching, white balance, and color correction was performed on the color images obtained by the system. The experimental results show that the system can realize the natural low-illumination color imaging that reflects the color characteristics of the scene itself, which can effectively improve the observation effect of the characteristics of the target scene at night, and can realize the color imaging under 5×10−4 lx illumination. © 2022 Editorial office of Journal of Applied Optics. All rights reserved.     

白光发光二级管用红色荧光粉LiSrBO3: Eu3+的制备与发光性能研究

采用高温固相法制备了LiSrBO₃:xEu³⁺ 荧光粉, 并通过XRD, 红外(FITR) 和荧光光谱(PL) 等对其表征. 结果表明, LiSrBO₃: Eu³⁺ 荧光粉可被波长为395 nm 的紫外线和466 nm 的蓝光有效激发, 且发射主波长为612 nm (Eu³⁺的电偶极跃迁⁵D₀ →⁷F₂) 的红光. 研究了Eu³⁺ 掺杂浓度对LiSrBO₃: Eu³⁺ 材料发光强度的影响, Eu³⁺ 掺杂浓度为6% 时样品的发射强度最大, 并且证实Eu³⁺ 之间的能量传递机制为电偶极子- 电偶极子相互作用. Li⁺, Na⁺, K⁺ 作为电荷补偿剂的引入全部导致LiSrBO₃: Eu³⁺ 材料发射强度增强, 其中, Li⁺ 的引入要优于Na⁺ 和K⁺. 少量Al³⁺的掺杂降低了Eu³⁺ 所处格位的对称性, 增强了Eu³⁺ 的612 nm 的电偶极发射, 改善了LiSrBO₃: Eu³⁺ 红色材料的色纯度. 关键词： 白光发光二级管 光致发光 浓度猝灭 电荷补偿剂     

CaMoO4：Eu3+,Bi3+,Li+红色荧光粉的共沉淀制备与表征

采用共沉淀法合成了红色荧光粉Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺及Ca_0.5MoO₄：Eu_0.25-2x³⁺, Bi_x³⁺,Li_0.25+x⁺,并采用X射线衍射(XRD)、拉曼光谱,扫描电镜(SEM)和荧光光谱(PL)测定分析了其结构形貌特征及发光性能。结果表明：制备的CaMoO₄：Eu³⁺,Bi³⁺,Li⁺红色荧光粉为白钨矿结构,颗粒尺寸约为0.5~1 μm。掺杂Bi³⁺的Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺的相对发光强度明显高于未掺Bi³⁺的Ca_0.75MoO₄：Eu_0.25³⁺荧光粉。Bi³⁺离子的掺杂将吸收来的能量传递给激活离子Eu³⁺,起到了能量传递的作用。当Bi³⁺掺杂量为x=0.005时,在395 nm激发下,主发射峰在616 nm处的相对发光强度最大,但掺杂浓度过高时会出现浓度猝灭现象。另外,电荷补偿剂的掺入能够解决材料中因同晶取代引起的电荷不平衡的问题,以Li⁺作电荷补偿剂、Eu³⁺和 Bi³⁺共掺合成的Ca_0.5MoO₄：Eu³⁺_0.23,Bi_0.01³⁺,Li⁺_0.26红色荧光粉的发光性能强于Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.5MoO₄：Eu_0.25³⁺, Li_0.25⁺及Ca_0.75MoO₄：Eu_0.24³⁺,Bi_0.01³⁺。     

Birthrates and delay times of Type Ia supernovae

Type Ia supernovae (SNe Ia) play an important role in diverse areas of astrophysics, from the chemical evolution of galaxies to observational cosmology. However, the nature of the progenitors of SNe Ia is still unclear. In this paper, according to a detailed binary population synthesis study, we obtained SN Ia birthrates and delay times from different progenitor models, and compared them with observations. We find that the Galactic SN Ia birthrate from the double-degenerate (DD) model is close to those infe...