New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.     

掺杂ZrO＿2的Pt／Al＿2O＿3表面氧性质及一氧化碳氧化性能研究

用ＴＰＤ－ＭＳ、ＴＰＳＲ－ＭＳ及ＣＯ氧化活性测定等方法研究了Ｐｔ／Ａｌ２Ｏ３和掺杂超细ＺｒＯ２的样品的表面氧脱出－恢复性能、ＣＯ表面氧化性能及催化氧化性能．结果表明，在Ｐｔ／Ａｌ２Ｏ３中掺杂ＺｒＯ２后，样品表面上的氧物种脱出和氧化恢复性能明显提高，脱氧量也明显增大；并发现在ＣＯ－ＴＰＳＲ过程中程脱物ＣＯ２的脱附量大小及峰顶温度次序与对ＣＯ的催化氧化活性也有一致的关系     

Comparison ofn-decane hydroconversion with Pt/SAPO-5 and Pt/SAPO-11 catalysts

The product distributions from bifunctional conversion ofn-decane over Pt/SAPO-5 and Pt/SAPO-11 catalysts are compared in detail. Selectivities in decane reaction vary largely with the catalyst employed: Pt/SAPO-11 produces high yields of feed isomers, whereas Pt/SAPO-5 gives high yields of cracked products and only under mild reaction conditions are isodecanes the main products obtained. These selectivities seem to be determined by the structure of the catalyst.     

探针反应和FTIR法研究Pt与L型沸石的相互作用

探针反应和ＦＴＩＲ法研究Ｐｔ与Ｌ型沸石的相互作用董家禄,朱建华,须沁华,张婕,刘大壮（南京大学化学系,南京,２１０００８）（郑州工学院化工系,郑州,４５０００２）关键词Ｐｔ／Ｌ沸石,沸石催化剂,异丙醇分解反应,Ｐｔ－载体相互作用Ｐｔ的分散度和电子状态...     

分子筛体系的氢溢出效应

分子筛体系的氢溢出效应李晓燕，盛太成，杨孔章（山东大学化学院，济南２５０１００）关键词铂／分子筛催化剂，氢溢出，程序升温脱附负载型金属催化剂的表面氢溢出效应近年来引起了人们的重视．人们采用不同的实验方法对此进行了广泛的研究，但对以分子筛为担体的负载型...     

锆对铂重整催化剂性能的影响规律

以正庚烷的转化为探针反应 ,研究了添加元素锆对铂重整催化剂性能的影响规律。结果表明 ,在 4 50℃和连续流动条件下 ,Pt/γ -Al2 O3催化剂中引入锆不仅能够提高铂催化剂的稳定性和芳构化产率、抑制氢解和异构化 ,而且能使铂催化剂保持初活性。锆含量在 0 .56%左右 ,其调变作用最为显著。     

Isomerization ofn-hexane overplatinum loaded zeolites

The effect of the calcination temperature of bifunctional Pt/zeolites on the isomerization ofn-hexane has been investigated. The catalyst calcined at 350°C showed the highest metal dispersity and the best activity. The higher selectivity of dimethylbutanes over Pt/H- than over Pt/H-MOR might be attributed to the combined effect of acidity, channel structure and pore size of zeolites.     

电化学方法研究I3^—和Ti^3＋在铂上的异相催化

用电化学方法研究了Ｉ－３和Ｔｉ３＋在还原铂表面上的电极反应，由此计算出Ｉ－３与Ｔｉ３＋在还原铂表面上的混合催化反应速率（νｍｉｘ）．当混合催化电位（Ｅｍｉｘ）位于极限电流区时，νｍｉｘ对［Ｔｉ３＋］为零级反应，对［Ｉ－３］为一级反应，且正比于电极旋转速率的平方根，Ｈ＋浓度影响不大．由动力学方法研究的结果证实了电化学研究结果的正确性，致使可用电化学方法解释溶液中的异相催化问题     

前驱体水解对纳米铂形状控制合成的影响

以聚丙烯酸钠(NaPA: M_w ≈ 2100)为保护剂，对比研究了H_2还原K_2PtCl_4 和K_2PtCl_6水溶液制备纳米铂晶粒的形状选择性，揭示了前驱体的水解对纳米铂 晶粒的形状控制合成具有显著影响。文献中通常采用的合成立方形状纳米铂的 K_2PtCl_4前驱体在水溶液中不稳定，避光静置一周会析出黑色沉淀。这种不稳定 性导致了以K_2PtCl_4为Pt前驱体的合成结果难以重复。相比而言，避光静墨的 K_2PtCl_6水溶液很稳定，以它为前驱体合成的纳米铂通常为削角八面体。 K_2PtCl_6水溶液暴露于室内光线中会出现[PtCl_6]~(-2)的光致水解。当[PtCl_6] ~(2-)的紫外特征吸收峰(260nm)由于光致水解完全消失后，以聚丙烯酸钠为保护剂 ，通过H_2还原可以有选择性地(约80%)合成由{100}晶面包裹的立方体形状的纳米 铂。     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.