Pt/Au/Fe3O4的制备及其电化学性能

以制得的纳米Fe₃O₄颗粒作为载体,用还原法将还原出的Au与Pt分别负载到Fe₃O₄颗粒表面,制得纳米Pt/Au/Fe₃O₄复合材料。对Pt/Au/Fe₃O₄进行紫外可见光吸收光谱、透射电子显微镜、X射线衍射及光电子能谱等物理表征,结果表明,Au与Pt均匀地沉积到了Fe₃O₄纳米颗粒表面。对纳米Pt/Au/Fe₃O₄复合材料进行循环伏安扫描,当H₂PtCl₆的加入量达到8 mL时,Pt/Au/Fe₃O₄催化性能最佳;正扫电流峰i_p与扫描速率的平方根v^1/2线性相关,Pt/Au/Fe₃O₄催化氧化甲醇的过程受扩散控制;对催化剂进行201次循环伏安扫描,催化剂仍然能保持较好的催化性能且稳定性良好。因此,所合成催化剂Pt/Au/Fe₃O₄是一种具有良好化学稳定性的阳极催化剂材料。     

纳米材料修饰电极上吸附态葡萄糖氧化酶的酶活性和电活性的比较

采用石英晶体微天平(QCM)技术, 监测了裸金(Au)电极、电沉积纳米金的金电极(Au_ed/Au)、多壁碳纳米管(MWCNTs)修饰的金电极(MWCNTs/Au)以及MWCNTs 修饰后再电沉积纳米金的金电极(Au_ed/MWCNTs/Au)上葡萄糖氧化酶(GOx)的吸附过程, 测算了吸附固定的GOx质量. 通过阳极恒电位检测吸附酶与葡萄糖发生酶反应所产生的过氧化氢, 考察了这些酶电极的安培响应, 并测算了各吸附态GOx的质量比生物活性(MSBAi).也通过循环伏安法研究酶的直接电化学, 测算了各吸附态GOx的电活性百分数(EAP_i). 实验结果表明, 酶吸附量和酶电极的安培响应满足MWCNTs/Au > Au_ed/MWCNTs/Au > Au_ed/Au > Au 的顺序; MSBA_i满足Au > Au_ed/MWCNTs/Au > Au_ed/Au > MWCNTs/Au的顺序; 而EAP_i则满足MWCNTs/Au > Au_ed/MWCNTs/Au > Au_ed /Au > Au的顺序. 根据酶和纳米材料的亲疏水作用以及酶的吸附量对实验结果进行了合理解释, 也定量验证了电极上吸附酶分子的总生物活性与酶电极的安培响应呈正相关关系, 所得数据和结论有助于纳米材料固定酶及其安培酶电极的研究.     

Pd/Au(100)表面上乙烯气相氧化法合成乙酸乙烯酯催化活性的密度泛函理论研究

采用密度泛函理论方法系统地研究了Pd/Au(100)表面上乙烯气相氧化法合成乙酸乙烯酯的催化活性.对关键反应物种在该表面的吸附、共吸附性质及耦合基元反应进行了计算和讨论.乙烯在Pd/Au(100)表面上存在π-,2σ-两种稳定吸附构型,为弱化学吸附;乙酸根物种存在Pd-Au与Pd-Pd两种二位啮合(bi-dentate)构型,为强化学吸附.Pd/Au(100)表面的吸附作用使两个关键反应物种分子轨道能量靠近.共吸附构型中最高占据和最低未占据分子轨道的能级差(HOMO-LUMO-gap)随表面相邻Pd原子数目的增多而增大,表明由HOMO向LUMO分子轨道发生电子转移的能力变弱.耦合基元反应过渡态能垒的分析结果与HOMO-LUMO-gap定性分析结果一致,说明连续相邻的表面Pd原子不利于反应的进行.     

三角形Au@TiO2介孔催化剂可见光降解亚甲蓝

利用溶胶凝胶法制备出一种三角形Au@TiO₂核壳材料。经过水热晶化,该材料膨胀至300 nm,壳层TiO₂晶化为介孔锐钛矿相,但核心三角形Au颗粒的形貌保持不变。采用粉末X射线衍射(PXRD)、ζ电位、高分辨透射电子显微镜(HRTEM)、热重分析(TGA)、光致发光(PL)光谱、光电流(i-t)以及光催化降解技术,对样品的结构和性能进行了系统、详细的检测与分析。经过晶化处理的Au@TiO₂在可见光波段的光降解亚甲蓝性能比未晶化时有了显著的提升, 1 mg·mL^-1 Au@c-TiO₂可以在可见光照射1 h后实现对60 mg·L^-1亚甲蓝全降解。电子顺磁共振(EPR)测试表明·O₂^-和·OH两种自由基对光降解起到了很大作用。通过综合分析实验结果和时域有限差分(FDTD)分析,探究了催化反应的机理。     

ZnO纳米线基MWNTs/PVDF复合热电材料的制备及特性研究

将不同比例的多壁碳管(MWNTs)与聚偏二氟乙烯(PVDF)聚合物混合后,喷涂于n型ZnO半导体纳米线阵列上,制备了一种新型ZnO纳米线基MWNTs/PVDF热电复合材料.与以往采用价格昂贵的p型与n型单壁碳纳米管(SWNTs)与聚合物混合制备的复合热电材料特性相比,这种新型热电复合材料在降低制造成本的同时,利用分散于聚合物中MWNTs的一维电子传输特性及形成的大量界面势垒,加上ZnO半导体纳米线具有的较高载流子密度与迁移率,提高了复合热电材料中电子的输运特性,增加了材料对声子的散射强度.测试发现,在一定的温度梯度下,随着MWNTs添加质量百分比的增加,热电材料的温差电动势和电导率也随之增加,但其Seebeck系数变化量不大.研究表明,这种热电材料有望替代采用p型与n型SWNTs构建的SWNTs/PVDF复合热电材料.研究结果对开发超轻、无毒、廉价、可应用于各种微纳电子领域的新型电源具有重要的参考价值.     

Spectrophotometric and physicochemical investigations of Congo,alizarin red dyes and BSA interactions with Au,Ag and Au/Ag mix nanoparticles,and their antimicrobial activities

Individual and mix metal nanoparticles of Ag and Au have been prepared by the reducing method where citrate was used as reducing/stabilizing agent. The prepared NPs were characterized with UV/Visible and transmission electron microscopic (TEM) tools. The characteristic peak in UV/Visible at 525, 444 and 531 nm for Au, Ag and Ag/Au mix NPs respectively, gave primary confirmation of prepared NPs. TEM analysis showed the size of nanoparticles as 44.04, 19.78 and 30.93 nm for Ag, Au and Ag/Au mix NPs respectively. Congo and alizarin red dye interactions studies have been performed with prepared NPs to see the removal of the pollutants from water. Congo dye has shown weaker interaction as compared to alizarin due to structural symmetry. Amongst all, the AgNPs have shown maximum 67% and 75% interactions with Congo red and alizarin respectively due to high negative charges on the surface. The Au, Ag and Au/Ag mix NPs have shown stronger interaction with bovine serum albumin (BSA) protein up to 51, 59, 55% respectively, estimated through UV/Vis and physicochemical analysis. The biological evaluations of the prepared NPs have shown their antibacterial activity against Gram + ve and –ve species showing up to 9 cm zone of inhibition. The BSA interaction and antibacterial activity of NPs reveal the importance of NPs in medicinal field.     

A Highly Sensitive and Selective Label-free Electrochemical Biosensor with a Wide Range of Applications for Bisphenol A Detection

A label-free DNA-based electrochemical biosensor owning high sensitivity and selectivity has been established for detecting bisphenol A in a wide range of applications. Coupling the high electrochemical performance of graphene oxide-thionine-Au nanomaterial with the specific binding capacity of the aptamers to BPA, the monitoring of trace amount of BPA was realized, the detection limit was 3.3 pg ⋅ mL⁻¹ with strong anti-interference. Besides, using molecular docking, it was found that BPA binds to the bases DC-49, DC-51, DG-52, DG-53 and DA-63 on the aptamer via hydrogen bonding and π-π stacking interactions. Finally, the biosensor had been successfully applied in different real samples.     

Facile hydrothermal synthesis of zinc sulfide nanowires for high-performance asymmetric supercapacitor

A facile, single-step hydrothermal route is followed to prepare ZnS nanowires with large aspect ratios. The obtained ZnS nanowires deposited on nickel foam (ZnS/Ni-foam) exhibit a specific capacitance of 781 F/g at a current density of 0.5 A/g. An asymmetric supercapacitor fabricated from ZnS/Ni-foam as a positive electrode and jute derived activated carbon coated on Ni-foam (JAC/Ni-foam) as a negative electrode attains a high specific capacitance of 573 F/g at a current density of 0.5 A/g, with an accompanying high energy density of 51 Wh/kg at a power density of 200 W/kg in an extensive operating potential window of 1.2 V. In addition, the ZnS//JAC asymmetric supercapacitor reveals long-term cyclic stability, after 10,000 GCD cycles the device sustain around ～87 % of the initial specific capacitance. These results shed enlighten a new opportunity for promising electrode materials in supercapacitors.     

A Au nanoparticle and polydopamine co-modified biosensor: A strategy for in situ and label-free surface plasmon resonance immunoassays

This article reports a surface plasmon resonance (SPR) strategy capable of label-free yet amplified in situ immunoassays for sensitive and specific detection of human IgG (hIgG), a serum marker that is important for the diagnosis of certain diseases. Primarily, a wavelength-modulated Kretschman configuration SPR analyzer was constructed, and Au film SPR biosensor chips were fabricated. Specifically, based on Au nanoparticles (AuNPs) adsorbed on the surface of the Au film, the AuNP/Au film was coated with polydopamine (PDA) to fix streptavidin (SA), and then the biotinylated antibodies were connected to the surface of the biosensor chip. The SPR analyzer was utilized for in situ real-time monitoring of hIgG. Due to the immunological recognition between the receptor and target, the surface plasmon waves produced by the attenuated total reflection were affected by the changes in the surface of the biosensor chip. The resonance wavelength (λ_R) of the output spectra gradually redshifted, and the redshift degrees were directly related to the target concentration. The biosensor can realize the in situ detection of hIgG, displaying satisfactory sensitivity, excellent specificity and stability. Briefly, by monitoring the shift in λ_R after specific binding, a new SPR immunoassay can be customized for label-free, in situ and amplified hIgG detection. The operating principle of this research could be extended as a common protocol for many other targets of interest.