The Hydrotrope Action of Vitamin C

The effects of vitamin C are determined in the oil-in-water(0/ W) and water-in-oil(W/ 0) microemulsion regions of CTAB/ pentanol/ p-xylene/ H20 system. The addition of Vc joins the O/ W and W/ O areas in the phase diagram and expands the bicontinous region by reducing the lamellar liquid crystal one. The results show that the “ coupling action” of Vc is in fact a structural transition from lamellar crystal to isotropic phase with W/ O, O/ W and bicontinous structure.     

Optical and Electronic Properties of Different Kinds of Water‐Soluble Porphyrin Films

Water‐soluble porphyrin‐porphyrin and porphyrin‐CdSe nanoparticle monolayer films were self‐assembled on different substrates. The influence of substrates, types of films, and heat treatment temperature on fluorescence of different kinds of porphyrin films was investigated. The SEM images showed the formation of monolayer films on porous alumina foil. The films assembled on porous alumina foil possessed higher fluorescence intensity and thermal stability. The result of conductance measurement indicated that the interaction of trimethylamidophenylporphyrin iodide (TAPPI) molecules with hydroxyl groups on porous alumina foil was weakened after CdSe nanoparticles assembled with TAPPI.     

Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface

Comb polymers are commonly used as dispersants to stabilize highly concentrated cement suspensions. The effectiveness of such polymeric additives to stabilize these suspensions is determined to a large extent by the amount adsorbed. In this study we investigated the adsorption characteristics of various comb dispersant containing different graft densities on surfaces of cement particle. The effect of inorganic salts on their adsorption was also examined in order to elucidate their adsorption mechanism. The results show that the adsorption of comb polymer dispersants on cement surface conforms approximately to Langmuir's adsorption isotherm and the characteristic plateau A _s and adsorption free energy ΔG_ads are largely dependent on the anionic group content of the comb polymers. The A _s and ΔG_ads increase with increasing anionic group content. This information suggests that the adsorption of comb polymers on cement surfaces is dominated by electrostatic interaction between COO-groups on the comb polymers and the positive surface of the cement. This conclusion is supported by effects of inorganics such as calcium and sulfate ions, and diffuse reflectance FTIR spectroscopy. The implication of results for tuning polymers for the required performance in cement manufacture should be noted.     

Preparation of Ag Nanoparticles in Surfactant Solution

The physicochemical properties of Ag nanoparticles have been determined by the nature of the used chemical reductors. The reported procedures describe the reduction of silver ions using N‐Phenylbenzohydroxamic acid (PBHA) and ascorbic acid individually. The influencing factors including cationic, anionic, zwitterionic and nonionic surfactants and pH have also been investigated in detail.     

A Facile Method for Preparation of Superhydrophobic Surfaces with Poly(furfuryl Alcohol)/PTFE Composites

A stable superhydrophobic surface have been fabricated with poly(furfuryl alcohol) (PFA)/polytetrafluoroethylene (PTFE) composite coatings on steel substrates by using a facile method. The observation of field emission scanning electron microscopy revealed that the hierarchical microstructures formed on the surfaces are controlled by varying the curing temperature. This method can be easily operated on substrates of steel, therefore is readily developed to other engineering metal substrates such as aluminum, copper, etc.     

纳米金标记抗体增强SPR检测大肠杆菌O157∶H7

将金纳米粒子(AuNPs)标记的大肠杆菌O157∶H7(E.coli O157∶H7)的多克隆抗体(PAb)作为二抗,采用氨基偶联法将PAb固定在传感器表面作为一抗,通过三明治方法用双通道表面等离子体子共振(SPR)传感器对E.coli O157∶H7进行检测,并与SPR直接法检测进行了比较.结果表明,直接法的检出限为103cfu/mL,线性范围为103～109cfu/mL;AuNPs增强三明治法的检出限为10 cfu/mL,线性范围为10～1010cfu/mL,灵敏度比直接法提高了100倍,且具有更宽的检测范围.本方法不仅检测时间短,而且具有良好的选择性和重现性.     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

有机溶剂/缓冲液两相体系中全细胞催化拆分环氧氯丙烷

研究了有机溶剂/缓冲液两相体系中重组大肠杆菌E.coli BL21 (DE3)全细胞水解动力学拆分外消旋环氧氯丙烷制备(R)-环氧氯丙烷的过程.结果表明,最适反应条件为:最适有机溶剂异辛烷与缓冲液的体积比7:3,最适缓冲液pH 8.0,底物浓度574mmol/L,全细胞加入量0.07g湿菌体/ml溶液,温度30℃.在此条件下于1L反应器中反应45min,(R)-环氧氯丙烷的摩尔产率、光学纯度和时空产率分别达到37.5%,99.3%ee和0.286mol/(L·h).与单一水相体系相比,异辛烷/缓冲液两相体系中底物浓度和(R)-环氧氯丙烷时空产率分别提高了55.2%和98.6%.     

Mesophase behaviour of laterally di-fluoro-substituted four-ring compounds

Four new groups of the di-fluoro-substituted 4-(2′-(or 3′)-fluoro phenylazo)-2-(or 3-) fluoro phenyl-4″-alkoxyphenylazo benzoates (In–IVn) were prepared and investigated for their mesophase behaviour. An alkoxy group of variable chain length (n = 6, 10 and 14 carbons) is attached to the terminal phenylazo benzoate moiety, and two lateral fluoro substituents are attached individually with different orientations to the other two adjacent rings. The molecular structures of the prepared compounds were confirmed by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. The study aims to investigate the steric effect of the spatial orientation and relative positions of the two lateral fluorine atoms on the mesomorphic properties in their pure states. The mesophase behaviour was investigated via differential scanning calorimetry and mesophases were identified by polarised light microscopy. The investigation shows that these compounds exhibit high enantiotropic mesophases (SmC and N) and broad mesophase temperature range. The type and stability of the mesophase depends on the length of the terminal alkoxy chain and the position the two fluoro substituents. A comparison between these investigated compounds with their corresponding three-ring analogues was discussed.