Hydrogen peroxide in basic media for whole blood sample dissolution for determination of its lead content by electrothermal atomization atomic absorption spectrometry

Hydrogen peroxide in basic media is proposed as a means for dissolving whole blood samples to be analyzed by electrothermal atomization atomic absorption spectrometry, ET AAS. Approximately 2 g of the whole blood sample were directly weighed in a 150 mL volumetric flask; 3 mL of a NaOH 0.2 mol L⁻¹ solution, two drops of 1-octanol, as an antifoaming agent, and 1 mL of 30% volume hydrogen peroxide were added to the flask to promote oxidation. The solution was then manually shaken and after approximately three minutes of shaking, a clear solution, with no apparent suspended solids or greasy layers, was obtained. Distilled-deionized water was used to complete the volume. Ten μL of the resulting solution along with 10 μL of a solution containing 5000 mg L⁻¹ of NH₄H₂PO₄ and 300 mg L⁻¹ of Mg(NO₃)₂ as a modifier, were injected into transversely heated graphite tubes for lead determination. Both aqueous standards and standard addition calibration curves produced results not significantly different at a 95% confidence limit level. Accuracy of the measurements was assessed by analysis of the IAEA A-13 (concentration of trace and minor elements in freeze dried animal blood) standard reference material containing 0.18 mg L⁻¹ lead on a dry basis and by means of recovery tests. Analysis of the IAEA A-13 standard produced 0.17 ± 0.02 mg L⁻¹ lead on a dry basis; recovery tests afforded values from 95 to 105%. Ten consecutive measurements of a 5 ppb lead solution gave a characteristic mass of 47.2 pg and a (3S) detection limit of 1.77 μg L⁻¹ Pb. Results obtained from analysis of whole blood samples of volunteer donors covered a lead concentration range between 8 and 21 μg L⁻¹ with a mean value of 11.9 ± 4.7 μg L⁻¹.     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

Statistical-overlap theory for elliptical zones of high aspect ratio in comprehensive two-dimensional separations

The low prediction by statistical-overlap theory of the numbers of singlets and peaks in two-dimensional separations containing zones represented by either circles of small number or eccentric ellipses of any number is shown to result from use of probability expressions for unbound spaces of infinite extent. An exact theory is derived for the probability of singlet formation in a reduced two-dimensional space of unit length, width, and area. The probability is a weighted sum of the probabilities of singlet formation in the interior, edge, and corner regions of the space, which depend only on saturation. The weighting factors are the fractions of area associated with each region and depend on the number of zones, the aspect ratio, the saturation, and the ellipse's spatial orientation. The average numbers of doublets, triplets, and peaks in the space are approximated by combining these results with Roach's equations describing the clustering of circles in an unbound two-dimensional space. Simulations show that theory predicts the number of singlets, doublets, triplets, and peaks, when the number of zones is 25 or more, the aspect ratio is 100 or less, and the saturation is 2 or less. The relationship is derived between the aspect ratios of ellipses in the reduced space and actual separation space. Calculations are presented for comprehensive two-dimensional gas chromatography.     

流动注射在线萃取-火焰原子吸收法测定食用盐中的锌

基于锌与 1 (2 吡啶偶氮 ) 2 萘酚 (简称PAN)形成的配合物可被氯仿萃取 ,从高盐基体样品中分离富集锌 ,利用自行设计的分相器 ,实验确定了最佳的流动注射在线萃取 火焰原子吸收光度法测定锌的流路系统和化学反应条件。在选定的工作条件下 ,其RSD和检出限分别为 4 3 % (c=0 6 μg/mL ,n =1 1 )和0 0 3 μg/mL ,测定速度为 2 5样 /h。用于实际样品的测定 ,加标回收率为 97%～1 0 6 %。     

碱性体系在线氢化物发生—原子荧光光谱法测定痕量铋

提出了一种碱性体系在线氢化物发生－原子荧光光谱法测定痕量铋的分析方法。设计了在线氢化物发生系统流路及操作程序，研究了碱性体系氢化物发生的各项最佳条件。方法操作简便快速，能有效地消除过渡元素的严重化学干扰。应用于黄铜标样中痕量铋的直接测定，获得满意结果。     

纳米氧化铝负载双硫腙分离富集-原子吸收法测定地质样品中的金、铂、钯的研究

金、铂、钯在地质样品中的含量甚微,国内外常采用ICP-AES,ICP-MS和ETAAS直接测定。FAAS法由于仪器便宜、操作方便,也广泛应用于预富集后的痕量贵金属的分析。目前,在测定贵金属的分析方法中,常采用固相萃取法富集分离样品,主要的固相萃取剂有:无机吸附剂,交联树脂[1],螯合树脂[     

Stochastic simulation of reactive separations in capillary electrophoresis

A stochastic (Monte Carlo) simulation is used to investigate thermodynamic and kinetic contributions from the reversible A <--> B reaction in capillary electrophoresis (CE). The effects of equilibrium constant, rate constant, and electrophoretic mobility on the molecular zone profiles and the corresponding statistical moments are evaluated. As the reaction approaches steady state, the velocity of the zone is governed by the equilibrium constant and the electrophoretic mobilities of the reacting molecules. When the equilibrium constant is less than unity, the mean zone velocity is more similar to that of the reactant A. Conversely, when the equilibrium constant is greater than unity, the velocity is more similar to that of the product B. The extent of zone-broadening and asymmetry at steady state is dependent upon the equilibrium constant, the characteristic reaction lifetime, and the electrophoretic mobility difference between reacting molecules. If all other parameters are held constant, the plate height is greatest and skew is least when the equilibrium constant is unity. The plate height increases linearly with the characteristic reaction lifetime and electrophoretic mobility difference, whereas the skew is independent of these parameters. These conclusions have important implications for the elucidation of thermodynamic and kinetic information from experimental data.     

Controlled phase separations in solutions of soluble polyelectrolyte complex of DIVEMA (copolymer of divinyl ether and maleic anhydride)

Copolymer of divinyl ether and maleic anhydride (DIVEMA) is known to possess some anti-tumor and immune-stimulating activity and use as a drug carrier in anti-tumor drug delivery systems. Samples of DIVEMA of different degrees of polymerization were synthesized and characterized. Interaction of the hydrolyzed water-soluble DIVEMA polyanions with poly(N-ethyl-4-vinylpyridinium) cations (PEVP) has been studied. According to the potentiometry data, almost all carboxylic groups of the polyanions were able to form ion pairs with PEVP. In aqueous and water-salt solutions, formation of either soluble or insoluble polyelectrolyte complexes occurred depending on pH, ratio of the oppositely charged groups, and degree of polymerization of PEVP and/or DIVEMA. The phase separations followed general rules revealed by studying mixtures of PEVP and polycarboxylic acids. However in the case of DIVEMA, a significant broadening of the region for insoluble complexes at the expense of the region of soluble complexes was established. The data obtained demonstrate plausible advantages of the complex formation as the non-covalent modification of the polymeric carrier that endow DIVEMA with the ability for reversible soluble-insoluble transformation, in particular at physiological pH and ionic strength.     

缝管原子捕集原子吸收光谱法测定维生素B12

本文研究了Ａｌ２Ｏ２涂层的开缝石英管原子捕集法测定ＣＯ的条件并通过测ＣＯ间接测定维生素Ｂ（１２）。结果表明，在优化条件下Ｃｏ的特征浓度为８×１０（－３）μｇ·ｍＬ（－１），比常规火焰原子吸收法的灵敏度提高８倍。采用本法测定腺苷辅酶维生素Ｂ（１２）中ＶＢ（１２）的含量，相对标准偏差１．１％，加标回收率９８．２～１００．４％。     

血清必需元素测定中样品预处理方法的探讨

对血清必需元素测定的样品预处理方法进行了研究，用火焰原子吸收法测定了经不同处理的血清样品中的锌，铜，铁，钙，镁含量，结果显示，预处理方法不同，其测定结果有较大差异，变异系数，镁为７．９４％，锌，铜，铁，钙在１５．１９％～５３．５３％之间，并对各样品作了精密度和准确度实验。