磁共振方法研究12-钨磷酸水合物中水分子的运动状态

本文使用以Cu(Ⅱ)为顺磁探针的ESR以及宽谱线~1H-NMR等磁共振方法,研究了12-钨磷酸水合物中水分子的运动状态,结果表明水合水的活动性不仅取决于温度,而且还与12-钨磷酸水合物中的含水量有关。     

聚十二烷二元酸酯及其共聚酯的合成

通过直接熔融缩聚法合成了一系列聚十二烷二元酸酯，用GPC、^1H—NMR、FTIR对产物进行了表征，并讨论了预聚酯合成时催化剂浓度和种类、预聚反应温度、预聚初始醇酸摩尔比对聚合反应的影响。结果表明，在所选的三个催化剂体系中，氮化亚锡二水合物与对甲苯磺酸复合催化剂的催化效果最好；最佳反应条件：n对甲苯横酯／n二元酸=0．0021～0．0032，反应温度为160～180℃，醇酸摩尔比范围为1．05—1.10。     

不同孔径的介孔碳分子筛对VB12的吸附性质研究

摘要利用SBA-15为模板, 在不同温度下合成了孔径大小在3.7(CMK-3-100)和6-3 nm(CMK-3-150)之间的介孔碳， 以其作为吸附剂, 研究了它们在水溶液中对VB12的吸附作用. 结果表明, CMK-3-130与CMK-3-100和CMK-3-150相比， 表现出对VB12最大的吸附能力(吸附能力为412.5 mg/g), 这是因为它有比较高的有序结构和比较大的孔容.     

Synthesis of 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (chikusetsusaponin-LT8), a glycoside from Panax japonicus

A method for preparative production of 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (1), a glycoside from Panax japonicus, chikusetsusaponin-LT₈ was developed. Chemical transformation of betulafolientriol, a component of Betula leaves extract, produced the 12-keto-20S-protopanaxadiol (3β,20S-dihydroxydammar-24-en-12-one) (2), exhaustive glycosylation of which by 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosylbromide (3) under Koenigs—Knorr reaction conditions with subsequent removal of protecting groups formed 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (1). The principal glycosylation product was 3β,20S-dihydroxydammar-24-en-12-one 3-O-β-D-glucopyranoside if equimolar amounts of (2) and (3) were used. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 44–48, January–February, 2006.     

硅钼杂多阴离子薄膜修饰电极的研究和应用——线性扫描伏安法测定水中可溶性硅酸盐

本文研究了以玻碳电极为基体的1:12硅钼杂多酸根(SiMo_(12)O_(40)~(4-)简称12-MSA)修饰电极的制备及其电化学行为,将12-MSA电极应用于线性扫描伏安法测定天然水中可溶性硅酸盐,结果满意.硅浓度在8.0×10~(-7)～1.7×10~(-3)mol/L,相对标准偏差(n=7)为1.85％,加标回收率为98.2％～103.6％,SiMo_(12)电极具有优良的选择性和稳定性。     

12-钼磷酸与γ-Al2O3载体的相互作用

应用酸碱滴定、X射线衍射(XRD)、激光拉曼(LRS)和顺磁共振(EPR)等方法研究了磷钼酸(PMo_(12))与γ-Al_2O_3载体间的相互作用．结果表明，PMo_(12)在γ-Al_2O_3上随负载量增加出现三种不同的分散状态，据此提出了PMo_(12)在γ-Al_2O_3上的铺展模型．     

10,12—双炔廿三酸盐的LB膜特性研究

本文合成了10,12-双炔廿三酸,并用其在Si、SiO_2、CaF_2等基片上沉积了LB膜,结果表明,10,12-双炔廿三酸的镉盐成膜更稳定。这种LB膜在紫外光辐照下很快聚合,聚合前后的紫外-可见吸收光谱发生规律性的变化,并保持层状结构,等同周期稍变。通过红外吸收的二向色性分析,确定了该分子的取向。     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

TiSiW12O40/TiO2催化合成苹果酯

以固载杂多酸盐TiSiW12O40/TiO2为多相催化剂，通过乙酰乙酸乙酯和乙二醇反应合成了苹果酯，探讨TiSiW12O40/TiO2对缩酮反应的催化活性，较系统地研究了原料量比，催化剂肜量，反应时间诸因素对产品收率的影响，实验表明：TiSiW12O40/TiO2是合成苹果酯的良好催化剂，在n(乙酰乙酸乙酯）：n(乙二醇）＝1：1．5，催化剂用量为反应物料总质量的1．0％，环己烷为带水剂，反应时间50min的优化条件下，苹果酯的收率可达84．1％。     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.