基于网格搜索的参数优化方法用于鱼粉灰分的近红外LSSVM定量分析

采用近红外(NIR)光谱技术和最小二乘支持向量机(LSSVM)参数优化方法,建立定标预测模型测定鱼粉灰分的含量,采用去趋势校正和标准正交校正(DC-SNV)相结合的方式进行光谱预处理,基于网格搜索法建立LSSVM的参数优化模型,提高NIR光谱定量分析的预测精度。结果表明,LSSVM参数网格搜索方法能够有效地应用于鱼粉NIR光谱模型优化,获得的鱼粉灰分的光谱预测值与化学测定值能较准确的匹配,有利于NIR光谱技术快速检测在养殖饲料产品中的应用。     

Organic residue analysis of Neolithic pottery from North Greece

Organic residues associated with Neolithic pottery from two Late Neolithic sites, Paliambela and Makriyalos (Northern Greece), were analyzed by gas chromatography-mass spectrometry. The study aimed at identifying the origin of the tar used for waterproofing and gluing broken pots. Reference tars were prepared in laboratory conditions by pyrolysis of the bark from three tree species, namely from Betula pendula (silver birch), Ostrya carpinifolia (hop hornbeam) and Carpinus orientalis (Eastern hornbeam). The results suggest that mostly birch bark tar was used as glue for fixing broken pieces of the pots as well as for waterproofing close-shaped vessels. None of the archaeological tars derived from the two hornbeams. The analysis shows certain variability in the composition of birch bark tar, which is related to the production technique and to the re-use of tar. Of particular interest is the presence of characteristic diterpenoid biomarkers in several samples, which indicates that pine pitch was used for gluing and pine resin for waterproofing vessels for liquids. Correspondence: Sophia Mitkidou, Department of Science, School of Technological Applications, Technological Institute of Kavala, Greece     

Source attribution of agriculture-related deposition by using total nitrogen and δ15N in epiphytic lichen tissue,bark and deposition water samples in Germany

Compared with physico-chemical deposition measurement methods, lichens are able to identify the long-term overall effects of high N pollution concentrations in the air. In addition, the natural abundances of the stable isotope of N, ¹⁵N, are being widely used in research on N cycling in ecosystems. They can also be used as instruments for source attribution. In this study, epiphytic lichens were tested to determine whether their respective N content and δ¹⁵N ratios can be used to estimate N deposition rates and to locate various sources of N compounds. Epiphytic lichen and bark samples were collected from around various deposition measurement field stations at different sites in the western part of Germany. The N content of epiphytic lichens reflects the species-specific, agriculture-related circumstances of N deposition at various sites in Germany. At the same time, δ¹⁵N signatures of the different investigated epiphytic lichen species and bark samples are highly depleted in ¹⁵N under high ammonium deposition. The different surface types of lichens and barks exhibit different concentrations of N and δ¹⁵N ratios, despite being exposed to similar N deposition rates. The verification of highly negative δ¹⁵N ratios at sites with local and regional emitters shows that source attribution is possible by comparing different δ¹⁵N signatures in areas with a wide range of different N deposition types and the corresponding differences in δ¹⁵N among various source N pools. Especially nitrophytic lichens can support the on-site instrumentation measuring N deposition by qualification and quantification.     

光度法研究壳聚糖交联粉煤灰对Mn2＋的吸附性能

常温下,以壳聚糖和酸性粉煤灰为原料,制备壳聚糖交联酸性粉煤灰吸附剂;用光度法分析其对Mn2＋的吸附性能.结果表明：交联时,当壳聚糖与酸性粉煤灰的质量比为1∶11,交联剂用量为2mL/g;吸附时,废水pH为6,吸附时间为90min,吸附剂用量为10g/L时,Mn2＋去除率为97.6％.     

Isolation and Crystal Structure of 3β-acetoxy-20 （29）-lupen-28-aldehyde from the Bark of Platanus Acerifolia Willd

The title compound,3β-acetoxy-20(29)-lupen-28-aldehyde,is a pentacyclic triterpene which was first isolated from the acetyl acetate fraction of Platanus acerifolia Willd bark and characterized by 1 H-NMR and 13 C-NMR.Besides,the crystal of the compound was acquired,and the relative configuration of 3β-acetoxy-20(29)-lupen-28-aldehyde was determined by single-crystal X-ray diffraction analysis for the first time.It crystallizes in the monoclinic system,space group C2 with a=14.428(3),b=6.6620(13),c=30.399(6),β=103.73(3)°,Z=4,C32 H50 O3,M r=482.72,Dc =1.130 g/cm 3,V=2838.5(10)3,μ(MoKa)=0.070 mm-1,F(000)= 1064,the final R=0.0657 and wR=0.1855 for 2839 independent reflections (R int=0.0802)and 1963 observed ones (I>2(I)).Intramolecular van der waals force contributes to the stability of the structure.     

An attempt to analyze the bark disease in Havea brasiliensis using X‐ray absorption near‐edge spectroscopy

The X‐ray absorption near‐edge spectroscopy (XANES) technique has been used to determine the chemical change of elements induced by bark diseases in Havea brasiliensis (rubber latex tree). The results show the good sensitivity of in situ XANES for characterizing the chemical structure of phosphorus, sulfur, potassium and calcium in healthy and diseased Havea brasiliensis. Important information for understanding the bark disease involved in the sulfur metabolism of plants was also obtained from XANES.     

Study on the retention of uranyl ions on modified clays with titanium oxide

Four analytical techniques—instrumental neutron activation analysis (INAA), inductively coupled plasma mass spectrometry (ICP-MS), scanning electron microscope energy dispersive X-ray fluorescence (SEM-EDXRF), and proton induced X-ray emission (PIXE)—were evaluated in the context of air pollution biomonitoring studies. Three combinations INAA/ICP-MS, ICP-MS/PIXE and ICP-MS/SEM-EDXRF are illustrated by experimental results.     

Microwave-assisted extraction and ultrasonic extraction to determine polycyclic aromatic hydrocarbons in needles and bark of Pinus pinaster Ait. and Pinus pinea L. by GC-MS

Two different extraction strategies (microwave-assisted extraction (MAE) and ultrasonic extraction (USE)) were tested in the extraction of the 16 US Environmental Protection Agency (EPA) polycyclic aromatic hydrocarbons (PAHs) from pine trees. Extraction of needles and bark from two pine species common in the Iberian Peninsula (Pinus pinaster Ait. and Pinus pinea L.) was optimized using two amounts of sample (1 g and 5 g) and two PAHs spiking levels (20 ng/g and 100 ng/g). In all cases, the clean-up procedure following extraction consisted in solid-phase extraction (SPE) with alumina cartridges. Quantification was done by gas chromatography (GC) with mass spectrometry (MS), using five deuterated PAH surrogate standards as internal standards. Limits of detection were globally below 0.2 ng/g. The method was robust for the matrices studied regardless of the extraction procedures. Recovery values between 70 and 130% were reached in most cases, except for high molecular weight PAHs (indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[ghi]perylene). A field study with naturally contaminated samples from eight sites (four in Portugal and four in Catalonia, Spain) showed that needles are more suitable biomonitors for PAHs, yielding concentrations from 2 to 17 times higher than those found in bark. The levels varied according to the sampling site, with the sum of the individual PAH concentrations between 213 and 1773 ng/g (dry weight). Phenanthrene was the most abundant PAH, followed by fluoranthene, naphthalene and pyrene.     

Studies of structural alterations of humic acids from conifer bark residue during composting by pyrolysis-gas chromatography/mass spectrometry using tetramethylammonium hydroxide (TMAH-py-GC/MS)

Pyrolysis-gas chromatography/mass spectrometry using tetramethylammonium hydroxide (TMAH-py-GC/MS) was used to characterize the humic acids (HAs) produced during the composting of conifer bark. The syringyl to guaiacyl ratios of HAs during composting were estimated from the peak area ratios for 3,4,5-trimethoxy to 3,4-dimethoxy benzene derivatives (0.11–0.50), which are characteristic of conifer species. The peak areas for nitrogen-containing and fatty acid pyrolysate compounds increased significantly during composting, indicating the degree of humification during composting. HA samples from the bark composts contained higher levels of diterpene resin acids, monoterpenes and sesquiterpenes. To investigate the species of terpenes, the HA was extracted with ethanol, and the components of the extract classified into α-HA and hymatomelanic acid (HMA) fractions, respectively. The peak areas for terpenes in the α-HA fraction were much smaller than those in the original HA, indicating that the majority of terpenes were extracted into the HMA fraction. If terpenes were to bind to HMA via unspecified interactions, no peaks would be apparent for the direct injection of HMA in ethanol into the GC/MS without pyrolysis. A comparison of the total ion chromatograms of HMA for the TMAH-py-GC/MS and GC/MS revealed that terpenes in the HA had been incorporated into polymeric structures of HMA. These results indicate that terpenes are transferred from the raw bark and incorporated into HA fractions during the composting processes.     

Withering timings affect the total free amino acids and mineral contents of tea leaves during black tea manufacturing

The aim of the present study was to investigate the effect of withering timings (i.e. 0, 21, 22, 23 and 24 h) on the moisture, total free amino acids, ash, essential and toxic mineral element contents of tea (Camellia sinensis L.) leaves during black tea manufacturing. Moisture, ash, Na, P, Mg, Cu, Zn, Mn, Al, Ni and Pb contents were significantly (P < 0.05) affected by withering, whereas non-significant (P > 0.05) results were noted for total free amino acids, K, Fe and Cd contents. The highest moisture content (76.4%) was examined in fresh leaves that progressively decreased to 63.8% in 24 h withering. Total free amino acid contents gradually increased up to 23 h and then decreased. Ash, P, Cu, Zn and Mn contents showed an increasing trend with withering time. Conversely, significantly lowered amounts of Na (162.5 mg/kg) and Mg (803 mg/kg) were recorded in tea leaves after 24 h withering. Among the toxic elements, Al, Ni and Pb contents were progressively increased over withering time. It was concluded that tea is a potential source of essential chemical constituents and during processing proper care should be taken to produce high quality black tea.