Thin‐Layer Cyclic Voltammetric and Scanning Electrochemical Microscopic Study of Antioxidant Activity of Ascorbic Acid at Liquid/Liquid Interface

An electron transfer reaction between ascorbic acid (H₂A) in an aqueous solution and oxidizing agent in an organic solution immiscible with water has been studied by thin‐layer cyclic voltammetry (TLCV) for charge transfer at the interface between two immiscible electrolyte solutions (ITIES). As an antioxidant, H₂A provide electrons through the aqueous/organic interface to reduce Fc⁺ and the procedure has been proved to be a one electron process again. In this work, the first combination of TLCV and scanning electrochemical microscopy (SECM) was achieved and showed a reasonable agreement between the results from the two different approaches. Otherwise, lower concentration ratios Kr of aqueous to organic reactants was adopted, which is given as evidence to the proposed procedure of Barker.     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

Silicomolybdate‐Doped PEDOT Modified Electrode: Electrocatalytic Reduction of Bromate and Oxidation of Ascorbic Acid

Electrically conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) film doped with silicomolybdate (SiMo₁₂O₄₀^4? or SiMo₁₂) was synthesized by electrochemical polymerization. The synthesized film is capable of fast charge propagation during redox reactions in strong acid medium 0.2 M H₂SO₄ solution. The modified electrode was used towards reduction of bromate and successfully employed as an amperometric sensor for bromate and also above modified electrode was investigated for ascorbic acid oxidation.     

Electrochemical Preparation of Poly(Malachite Green) Film Modified Nafion‐Coated Glassy Carbon Electrode and Its Electrocatalytic Behavior Towards NADH,Dopamine and Ascorbic Acid

Poly(malachite green) film modified Nafion‐coated glassy carbon electrodes have been prepared by potentiodynamic cycling in malachite green solution. The pH of polymerisation solution has only minor effect on film formation. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the growth of the poly(malachite green) film. Cyclic voltammogram of the poly(malachite green) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 56 mV per pH unit. The electrocatalytic behavior of poly(malachite green) film modified Nafion‐coated glassy carbon electrodes was tested towards oxidation of NADH, dopamine, and ascorbic acid. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(malachite green) film compared to bare glassy carbon electrode. In the case of NADH, the overpotential was reduced substantially on modified electrode. Finally, the feasibility of utilizing poly(malachite green) film electrode in analytical estimation of ascorbic acid was demonstrated in flow injection analysis.     

伏安型植物组织生物微电极的研究：混合不同植物组织碳糊微电极的研究

由于香蕉组织中含有的氧化酶能够生物催化氧化多巴胺，去甲肾上腺素，Ｌ－多巴等，大大地提高了植物组织电极的灵敏度；又由于茄子组织中所含有的氧化酶在催化氧化儿茶酚的同时，能有效地抑制抗坏血酸在电极上的反应，将上述两种植物组织混合制成电极，使其更适于神经递质的测定，线性范围：２．４×１０＾－６－－９．８×１０＾－４ｍｏｌ／Ｌ；检出下限３．２×１０＾－７ｍｏｌ／Ｌ。     

平行双铂丝微电极用于铁氰化钾电流滴定法测定抗坏血酸的研究

平行双柱微电极是一种基于可逆氧化还原物质在电极间反馈扩散使得信噪比进一步增大的新型微电极,作者首次将这种电极应用于电流滴定分析中。结果显示,电极间距很小时,终点突跃变敏锐,使灵敏度进一步提高。该方法不需搅拌溶液,单次测量样品量只需约3μ1,是一种有实用价值的新方法。     

双波长薄层紫外可见光谱电化学测定多巴胺

多巴胺 (DA)和抗坏血酸 (AA)的吸收光谱在 2 0 0～ 30 0nm内重叠严重 ,但在电化学氧化状态下 ,DA的氧化产物在 2 10 ,30 0和 4 80nm有强吸收峰 ,AA的氧化产物在 2 0 0～ 4 0 0nm范围内吸收较弱且呈光滑平缓的斜坡。在此基础上 ,利用自行设计的长光程薄层光谱电化学池建立了一种双波长光谱电化学法测定DA。测定条件为 pH 6 .2的磷酸盐缓冲液 (PBS) ,0 .6V (vs.Ag/AgCl)电极电位 ,双波长 318/ 2 93nm ,线性范围为 4 .0× 10 - 6 ～ 2 .0× 10 - 4mol·L- 1,检出限为 2 .0×10 - 6 mol·L- 1。对 6 .2 0× 10 - 5mol·L- 1DA进行 11次平行测定 ,平均相对偏差为 2 .6 %。与文献报道的吸光光度法相比 ,该法具有较高的灵敏度和选择性 ,较为有效地消除了AA的干扰 ,回收率在 91.8%～ 10 0 .8%之间 ,结果满意     

Solvent dependent dimercaptothiadiazole monolayers on gold electrode for the simultaneous determination of uric acid and ascorbic acid

Dimercaptothiadiazole compound, 2,5-dimercapto-1,3,4-thiadiazole (DMcT) forms ‘thin’ monolayers on Au electrode when it was adsorbed from methanol, ethanol or DMSO solutions while it forms ‘thick’ layers on Au electrode from an aqueous solution under identical experimental conditions. Thick DMcT layers formed from aqueous solution effectively blocks the redox reaction of couple in contrast to thin DMcT monolayers. The monolayer thickness did not vary when structurally related DMcT compounds, 5-methyl-1,3,4-thiadiazole-2-thiol or 5-amino-1,3,4-thiadiazole-2-thiol was adsorbed from aqueous and non-aqueous solutions. This indicates that the presence of two thiol groups in DMcT plays a crucial role in the formation of thick and thin DMcT layers on Au electrode when it was adsorbed from aqueous and non-aqueous solutions. Methanol, ethanol, or DMSO solution of DMcT is considered as strong acid because these solvents are able to deprotonate DMcT into DMcT⁻ and thus thin monolayers formed on Au electrode. The deprotonating ability of these solvents was further verified from the observed absorption spectrum characteristic of DMcT⁻ species. On the other hand, an aqueous solution of DMcT is less acidic due to weak deprotonation of DMcT by water and thus DMcT forms thick layer on Au electrode. Interestingly, thin DMcT monolayers formed from non-aqueous solvents separates the voltammetric signals of uric acid and ascorbic acid while thick DMcT layers formed from aqueous solution fails to separate them.     

Evaluation of a PVC‐Based Thionine‐Zeolite and Zeolite Free Membranes as Sensing Elements in Ion Selective Electrode

The construction and performance characteristics of thionine electrodes based on the ion‐pair complex thionine‐tungstophosphate and thionine‐mordenite zeolite embedded in a polyvinyl chloride (PVC) matrix is described. Thionine electrode based on the ion‐pair is used for the indirect determination of ascorbic acid by standard addition method.     

Electrocatalytic Properties of a Novel Poly‐1‐Naphthylamine‐Modified Electrode Using Ascorbic Acid as Molecule Probe

A glassy carbon electrode was modified with an electropolymerized film of 1‐naphthylamine in aqueous solution. The electrocatalytic properties of this modified electrode (ME) were investigated using ascorbic acid (AA) as probe molecule. The electrochemical behavior of AA in buffer solution was examined by voltammetry and amperometry. The results showed that the ME exhibited good electrocatalytic activity towards the oxidation of AA, as a consequence, it can be used as amperometric sensor of this analyte in a flow injection system with good sensitivity. Calibration curves were linear over the concentration range 0.05–1.50 mM with a phosphate buffer solution pH 3 as the carrier, the detection limit was 1 ppm (S/N=3). The methods were applied to the determination of AA in beverages and pharmaceutical products. A good correlation with a reference method was attained.