退火温度对a-Se0.70Ge0.15Sb0.15薄膜的结构和光学性质的影响

研究了退火温度对Se0.70Ge0.15Sb0.15薄膜的影响.通过热蒸发技术,在300K温度下将大块无定形Se0.70Ge0.15Sb0.1s沉积在石英和玻璃衬底上.研究发现,未经过退火处理的薄膜结构和在300K,1.33×10-5Pa下退火1小时后的薄膜结构都是无定形结构,而在同样气压470K温度下退火1小时的薄膜有结晶现象.通过在300 2 500nm范围内垂直入射光方向上透射率和反射率的测试,研究了薄膜的一些光学参数,如消光系数(k),折射系数(n)和吸收系数(a).研究发现,n和k同热处理温度有关.通过光学数据的分析,得到了不同条件下薄膜的间接带隙宽度(Enong),未经过热处理薄膜的Enong是1.715±0.021eV,300K下退火薄膜的Enong是1.643±0.021eV,470K下退火的Enong是1.527±0.021eV.退火温度降低了带隙宽度Enong,但增加了带尾eo这种效应可以根据Mott和Davis提出的多晶体系中态密度来解释.     

Determination of traces of Sb(III) using ASV in Sb-rich water samples affected by mining

Chemical speciation [Sb(V) and Sb(III)] affects the mobility, bioavailability and toxicity of antimony. In oxygenated environments Sb(V) dominates whereas thermodynamically unstable Sb(III) may occur. In this study, a simple method for the determination of Sb(III) in non acidic, oxygenated water contaminated with antimony is proposed. The determination of Sb(III) was performed by anodic stripping voltammetry (ASV, 1–20 μg L⁻¹ working range), the total antimony, Sb(tot), was determined either by inductively coupled plasma mass spectrometry (ICP-MS, 1–100 μg L⁻¹ working range) or inductively coupled plasma optical emission spectrometry (ICP-OES, 100–10,000 μg L⁻¹ working range) depending on concentration. Water samples were filtered on site through 0.45 μm pore size filters. The aliquot for determination of Sb(tot) was acidified with 1% (v/v) HNO₃. Different preservatives, namely HCl, L(+) ascorbic acid or L(+) tartaric acid plus HNO₃, were used to assess the stability of Sb(III) in synthetic solutions.The method was tested on groundwater and surface water draining the abandoned mine of Su Suergiu (Sardinia, Italy), an area heavily contaminated with Sb. The waters interacting with Sb-rich mining residues were non acidic, oxygenated, and showed extreme concentrations of Sb(tot) (up to 13,000 μg L⁻¹), with Sb(III) <10% of total antimony. The stabilization with L(+) tartaric acid plus HNO₃ appears useful for the determination of Sb(III) in oxygenated, Sb-rich waters. Due to the instability of Sb(III), analyses should be carried out within 7 days upon the water collection. The main advantage of the proposed method is that it does not require time-consuming preparation steps prior to analysis of Sb(III).     

Lactic acid bacteria in dairy food: Surface characterization and interactions with food matrix components

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.     

Comparative phytotoxicity of methylated and inorganic arsenic- and antimony species to Lemna minor, Wolffia arrhiza and Selenastrum capricornutum

The alkylation of metalloids through the transfer of methyl groups is an important factor in the biogeochemical cycling of elements like arsenic and antimony. In the environment, many different organic and inorganic forms of these elements can therefore be found in soils, sediments or organisms. Studies that compare the ecotoxicity of these different chemical species however are rare. Therefore, this study aimed to generate toxicity data on two scarcely studied organic compounds of arsenic and antimony, as well as to compare their toxicity to the inorganic species, which are studied so far to a higher extent, in order to improve the environmental effect assessment of these elements. To this purpose, bioassays were performed in which three different aquatic organisms (the floating water plants Lemna minor and Wolffia arrhiza and the green alga Selenastrum capricornutum) were exposed to a concentration series of 3 different arsenic species (sodium arsenite — As(III), sodium arsenate — As(V), and monomethylarsonous diiodide — MMAs(III)) and three different antimony species (antimony potassium tartrate hydrate — Sb(III), potassium hexahydroxoantimonate — Sb(V), trimethylantimony(V) bromide — TMSb(V). The observed effect concentrations demonstrated that the inorganic (III)- and (V)-valent species of arsenic were clearly more toxic than the corresponding antimony species. The highest overall toxicity has been shown by MMAs(III) followed by the inorganic As(III). The highest toxicity of the three tested antimony species has been observed for TMSb(V). The observed differences in effect levels stress the importance once more that speciation must not be ignored in toxicity studies.     

复合塑料包装袋中重金属迁移量的测定

将复合塑料袋用4％乙酸浸泡,采用石墨炉原子吸收光谱仪对其中的铅、镉、铬、镍、铜、砷迁移量进行了测定.结果表明:各元素的吸光度与质量浓度呈良好的线性关系,相关系数为0.998 9～0.9999,元素Pb、Cd、Cr、Ni、Cu、As的检出限分别为1.04、0.05、0.98、1.00、0.97、0.96 μg/L,各元素...     

Synthesis of Iridium Oxide Nanotubes by Electrodeposition into Polycarbonate Template: Fabrication of Chromium(III) and Arsenic(III) Electrochemical Sensor

For the first time iridium oxide (IrO₂) nanotubes are synthesized by electrodeposition in a polycarbonate (PC) template. Potential cycling (90 cycles) between 0.0 and 0.9 V is used for the preparation of IrO_x nanotubes onto the PC template with a pore diameter of 100 nm. Field‐emission scanning electron microscopy (FESEM) images show, that IrO₂ nanotubes with uniform diameters of 110±10 nm and an estimated length of 1–3 µm are formed. The electrochemical properties and the electrocatalytic activity of a glassy carbon‐IrO_x nanotube modified electrode toward Cr³⁺ and As³⁺ oxidation are investigated. Finally, the modified electrode is used for micromolar detection of the proposed analytes using differential pulse voltammetry.     

α,α'-二氧代烯酮环二硫代缩醛的NMR研究

报道了7种新的α,α'-二氧代烯酮环二硫代缩醛化合物的NMR谱.应用¹H、¹³C NMR谱等确定了这7种新化合物的分子结构,并对全部谱峰进行了归属,初步探讨了分子结构对化学位移的影响.     

On the existence of ion-acoustic solitary waves in a gravitating dusty plasma having charge fluctuation

Theoretical investigation on the propagation of ion-acoustic waves in an unmagnetized self-gravitating plasma has been made for the existence of solitary waves using the reductive perturbation method. It is observed that nonlinear excitations follow a coupled third-order partial differential equation which is slightly different from the usual case of coupled Korteweg-de Vries (K-dV) system. It appears that the system so deduced is a two-component generalization of the previous one derived by Paul et al. (1999) in which it was shown that ion-acoustic solitary waves can not exist in such system.     

短波长相变光盘记录介质Ge2Sb2Te5薄膜的制备及静态性能研究

研究了６３２．８ｎｍ波长下适用的相变光盘介质Ｇｅ２Ｓｂ２Ｔｅ５薄膜的制备方法和静态光存诸记录特性，发现该薄膜可在１００ｎｓ条件下实现直接重写，在优化膜层结构后，写擦循环次数高达１０＾６，反射率对比度在１５％以上。     

In_(0.2)Ga_(0.8)As/GaAs单量子阱PL谱温度特性及其机制

测量了不同阱宽In0.2Ga0.8As/GaAs单量子阱的PL谱的峰值波长和荧光谱线半峰全宽随温度的变化。利用Varshni公式对实验峰值波长进行拟合,得到了新的参数。结果表明,无位错应变量子阱带隙仍具有其体材料的特性:荧光谱线半峰全宽随温度升高迅速展宽,这主要归因于声子关联作用增强和激子热离化为自由载流子所致;阱宽越窄荧光峰值能量越高,将其与量子尺寸效应的理论计算结果进行了比较。文中还考察了谱线半峰全宽和阱宽的关系,利用合金无序对这一现象进行了解释。