土壤砷含量高光谱估算模型研究

以实验室内测取的土壤反射光谱为研究对象,利用PLSR方法建立反射光谱与土壤As含量之间的模型,通过交叉验证、估算检验建模精度,探讨利用反射光谱估算士壤As含量的可行性.通过比较不同光谱预处理方法、不同光谱分辨率和不同OM含量条件下建模、验证和估算结果.表明,MSC方法可以有效去除散射的影响而取得较好的结果(估算R2=0...     

(In, Mn)As nanowires with ultrahigh Mn concentration: Growth, morphology and magnetic anisotropy

(In,Mn)As nanowires with ultrahigh Mn concentration have been successfully grown on GaAs(001) substrates by molecular beam epitaxy. The morphology dependences on Mn concentration and growth temperature are investigated. High Mn concentration and high growth temperature are both necessary for the growth of nanowires. All the (In,Mn)As nanowires are self-aligned along [−110]GaAs, and therefore have the shape magnetic anisotropy with the easy axis along the alignment orientation of the nanowires.     

Influence of thermal annealing duration of buffer layer on the crystalline quality of In0.82Ga0.18As grown on InP substrate by LP-MOCVD

In_0.82Ga_0.18As epilayers were grown on InP substrates using a two-step growth technique by LP-MOCVD. A homogeneous low-temperature (450 °C) In_0.82Ga_0.18As buffer layer was introduced to improve the crystalline quality of epilayers. The influence of low-temperature buffer layer deposition condition, such as thermal annealing duration, on the crystalline quality of the In_0.82Ga_0.18As epilayer was investigated. Double-crystal X-ray diffraction measurement, Hall measurement, and Raman scattering spectrum were used to evaluate the In_0.82Ga_0.18As epilayers. Atomic force microscope was used to study the surface morphology. It is found that the In_0.82Ga_0.18As epilayer, with buffer layer thermal annealing for 5 min, exhibits the best crystalline quality. The change of the surface morphology of the buffer layer after thermal annealing treatment was suggested to explain the phenomenon.     

Nuclear data for the cyclotron production of ~（117）Sb and ~（90）Nb

This presented study is to make comparison of cross sections to produce ¹¹⁷Sb and ⁹⁰Nb via different reactions with particle incident energy up to 70 MeV as a part of systematic studies on particle-induced activations on enriched Sn, Y₂O₃ and ZrO₂ targets, theoretical calculation of production yield, calculation of required thickness of target and suggestion of optimum reaction to produce Antimony-117 and Niobium-90.     

提高PbWO4晶体光学性能的研究

钨酸铅（ＰｂＷＯ４）晶体在生长过程中由于缺氧产生了氧空位缺陷和Ｆｅ＾２＋杂质缺陷，使晶体着色，光学性能下降，在晶体生长过程中掺进Ｓｂ２Ｏ３，能消除氧空位，将Ｆｅ＾２＋氧化为无色的Ｆｅ＾３＋，较大幅度地提高ＰｂＷＯ４晶体的光学性能和闪烁性能。     

Optical properties of amorphous films

We have analyzed the optical properties of a-Ge_30-xSb_xS₇₀ chalcogenide glass films (x=0,10,20 and 30 at%); the chalcogenide films were prepared by vacuum thermal evaporation. The optical-absorption data indicate that the absorption mechanism is non-direct transition. We found that the optical band gap, E_opt, decreases from 2.04±0.01 to 1.74±0.01 eV, whereas the refractive index increases with increasing Sb content. Data are analyzed by the Wemple equation, which is based on the single-oscillator model.     

退火温度对a-Se0.70Ge0.15Sb0.15薄膜的结构和光学性质的影响

研究了退火温度对Se0.70Ge0.15Sb0.15薄膜的影响.通过热蒸发技术,在300K温度下将大块无定形Se0.70Ge0.15Sb0.1s沉积在石英和玻璃衬底上.研究发现,未经过退火处理的薄膜结构和在300K,1.33×10-5Pa下退火1小时后的薄膜结构都是无定形结构,而在同样气压470K温度下退火1小时的薄膜有结晶现象.通过在300 2 500nm范围内垂直入射光方向上透射率和反射率的测试,研究了薄膜的一些光学参数,如消光系数(k),折射系数(n)和吸收系数(a).研究发现,n和k同热处理温度有关.通过光学数据的分析,得到了不同条件下薄膜的间接带隙宽度(Enong),未经过热处理薄膜的Enong是1.715±0.021eV,300K下退火薄膜的Enong是1.643±0.021eV,470K下退火的Enong是1.527±0.021eV.退火温度降低了带隙宽度Enong,但增加了带尾eo这种效应可以根据Mott和Davis提出的多晶体系中态密度来解释.     

Determination of traces of Sb(III) using ASV in Sb-rich water samples affected by mining

Chemical speciation [Sb(V) and Sb(III)] affects the mobility, bioavailability and toxicity of antimony. In oxygenated environments Sb(V) dominates whereas thermodynamically unstable Sb(III) may occur. In this study, a simple method for the determination of Sb(III) in non acidic, oxygenated water contaminated with antimony is proposed. The determination of Sb(III) was performed by anodic stripping voltammetry (ASV, 1–20 μg L⁻¹ working range), the total antimony, Sb(tot), was determined either by inductively coupled plasma mass spectrometry (ICP-MS, 1–100 μg L⁻¹ working range) or inductively coupled plasma optical emission spectrometry (ICP-OES, 100–10,000 μg L⁻¹ working range) depending on concentration. Water samples were filtered on site through 0.45 μm pore size filters. The aliquot for determination of Sb(tot) was acidified with 1% (v/v) HNO₃. Different preservatives, namely HCl, L(+) ascorbic acid or L(+) tartaric acid plus HNO₃, were used to assess the stability of Sb(III) in synthetic solutions.The method was tested on groundwater and surface water draining the abandoned mine of Su Suergiu (Sardinia, Italy), an area heavily contaminated with Sb. The waters interacting with Sb-rich mining residues were non acidic, oxygenated, and showed extreme concentrations of Sb(tot) (up to 13,000 μg L⁻¹), with Sb(III) <10% of total antimony. The stabilization with L(+) tartaric acid plus HNO₃ appears useful for the determination of Sb(III) in oxygenated, Sb-rich waters. Due to the instability of Sb(III), analyses should be carried out within 7 days upon the water collection. The main advantage of the proposed method is that it does not require time-consuming preparation steps prior to analysis of Sb(III).     

Lactic acid bacteria in dairy food: Surface characterization and interactions with food matrix components

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.     

Comparative phytotoxicity of methylated and inorganic arsenic- and antimony species to Lemna minor, Wolffia arrhiza and Selenastrum capricornutum

The alkylation of metalloids through the transfer of methyl groups is an important factor in the biogeochemical cycling of elements like arsenic and antimony. In the environment, many different organic and inorganic forms of these elements can therefore be found in soils, sediments or organisms. Studies that compare the ecotoxicity of these different chemical species however are rare. Therefore, this study aimed to generate toxicity data on two scarcely studied organic compounds of arsenic and antimony, as well as to compare their toxicity to the inorganic species, which are studied so far to a higher extent, in order to improve the environmental effect assessment of these elements. To this purpose, bioassays were performed in which three different aquatic organisms (the floating water plants Lemna minor and Wolffia arrhiza and the green alga Selenastrum capricornutum) were exposed to a concentration series of 3 different arsenic species (sodium arsenite — As(III), sodium arsenate — As(V), and monomethylarsonous diiodide — MMAs(III)) and three different antimony species (antimony potassium tartrate hydrate — Sb(III), potassium hexahydroxoantimonate — Sb(V), trimethylantimony(V) bromide — TMSb(V). The observed effect concentrations demonstrated that the inorganic (III)- and (V)-valent species of arsenic were clearly more toxic than the corresponding antimony species. The highest overall toxicity has been shown by MMAs(III) followed by the inorganic As(III). The highest toxicity of the three tested antimony species has been observed for TMSb(V). The observed differences in effect levels stress the importance once more that speciation must not be ignored in toxicity studies.