Characteristics of Ti0.97Co0.03O2:Sb0.01 dilute magnetic semiconducting thin films deposited at 500 °C by pulsed laser deposition

Epitaxial Ti_0.97Co_0.03O₂:Sb_0.01(TCO:Sb) films were deposited on R-Al₂O₃ (1 1 0 2) substrates at 500 °C in various deposition pressures by pulsed laser deposition. The solubility of cobalt within the films increases with decreasing deposition pressure at a deposition temperature of 500 °C. The TCO:Sb films deposited at 5×10⁻⁶ Torr exhibit a p-type anomalous Hall effect having a hole concentration of 6.1×10²²/cm³ at 300 K. On the other hand, films deposited at 4×10⁻⁴ Torr exhibits an n-type anomalous Hall effect having an electron concentration of about 1.1×10²¹/cm³. p- or n-type DMS characteristics depends on the change of the structure of TCO:Sb films and the solubility of Co is possible by controlling the deposition pressure.     

A Highly Sensitive Spectrophotometric Assay of Bleomycins Based on the Fading Reaction of Some Halofluorescein Dyes

In weak acidic medium, anticancer antibiotics bleomycin A5 （BLMA5） and bleomycin A2 （BLMA2） can react with halofluorescein dyes such as erythrosin （Ery）, eosin Y （EY）, eosin B （EB） and rose bengal （RB） by virtue of electrostatic attraction and hydrophobic force to form the ion-association complexes, which can result in the fading reactions of four halofluorescein dyes. The maximum fading wavelengths of these four dyes were located at 527 nm for Ery, 515 nm for EY, 517 nm for EB and 546 nm for RB, respectively. The decrements of absorbance （AA） were directly proportional to the concentrations of bleomycin in a certain range. A new method for the determination of bleomycins anticancer drugs based on fading reactions of halofluorescein dyes has been developed. The method was not only highly sensitive but also simple and rapid. The molar absorptivities （ε） ranged from 1.5 × 10^5 to 7.5 × 10^5 L·mol^-1·cm^-1. It was applied to determination of the bleomycins in human serum, urine and rabbit serum samples. In this work, the spectral properties and the optimum reaction conditions were investigated. The structure of ion-association complexes and the reaction mechanism were discussed.     

氢化物－气相色谱的元素光度检测器

研究开发的一种新型的元素光度检测器主要用于锗、砷、锡和锑的氢化物气相色谱检测，具有高灵敏，高选择性。它是在普通火焰光度检测器的基础上加装了特制的滤光片改制而成的。对锗、砷、锡和锑的检测限分别为３．０×１０￣（－１１）ｇ、７．０×１０￣（－１１）ｇ、７．０×１０￣（－１０）ｇ和１．１×１０￣（－８）ｇ，相对标准偏差分别为１．８％、２．４％、２．６％和３．０％。     

Millimeter and submillimeter detection using Ga1?xAlxAs/GaAs heterostructures

We have shown that a Ga_1–xAl_xAs/GaAs heterostructure can be used as a sensitive tunable detector of mm-wave/sub-mm-wave radiation. The mechanism for detection requires the application of a magnetic field varying from approximately 0.2T at 94GHz (3.2mm wavelength) to 6.2T at 2500GHz (119m wavelength). The responsivity and N.E.P. at 3.2mm have been roughly estimated at 200V/W and 5×10^–11W/Hz respectively. The speed of such a detector could be several orders of magnitude greater than comparable InSb detectors.     

Photolytic oxidation of As species for determination of total As (including the ‘hidden’ As fraction) in coastal seawater by hydride generation-atomic fluorescence spectrometry

Ultraviolet irradiation (photolysis) in alkaline medium was applied for pretreatment of seawater samples so as to accurately determine total As by continuous-flow hydride generation-atomic fluorescence spectrometry. This sample pretreatment is meant to convert non-reducible As forms into inorganic As, which easily forms arsine. The optimised parameters were the treatment time and the pH of the medium. The behaviour of four hydride-reactive As species [As(III), As(V), MMA, DMA], and AsB, i.e. a typical non-hydride-reactive As species, when subjected to UV irradiation was studied. UV irradiation at pH 1 lead to conversion of all species into As(V) with the exception of AsB and DMA. Conversions of DMA and AsB into As(V) at pH 11 in less than 30 min were observed under UV irradiation. The limit of detection of As (measured as As(V)) by hydride generation-atomic fluorescence spectrometry was 0.1 μg/L and the repeatability of the oxidation procedure was about 10%. The method was applied to determination of total and directly reducible As at 11 sampling points of the Galician Coast (Atlantic Ocean, Spain). Total As concentrations were in the range 1.4-4.8 μg/L. A significant As fraction, between 20 and 44%, depending on the sampling point, corresponded to non-reducible As which was converted by UV irradiation into hydride-reactive As. This fraction should represent the sum of DMA, which yields a low sensitivity in the continuous flow-AFS system, and the hidden As fraction.     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

Zur Struktur zweier Arsen- und Antimontricarboxylate

Zusammenfassung Arsen-tris(2,2-dimethylpropionat) (1) kristallisiert monoklin in der Raumgruppe P2₁/n mita=926.2,b=2158.6,c=983.7 pm, =94.92° undZ=4. As hat gegenüber O die Koordinationszahl 3+3. Antimontripropionat (2) kristallisiert monoklin in der Raumgruppe P2₁/c mita=930.2,b=863.0,c=1575.2 pm, =90.27 undZ=4. Die Moleküle sind intermolekular zu Ketten verknüpft, wodurch Sb die Koordinationszahl 3+3 (+3) erreicht.

---

Structure of arsen(III) and antimony(III) carboxylates

Summary Arsen-tris(2,2-dimethylpropionate) (1) crystallizes monoclinic in the space group P2₁/n witha=926.2,b=2158.6,c=983.7 pm, =94.92°, andZ=4. As has a coordination number of 3+3. Antimony tripropionate (2) crystallizes monoclinic in the space group P2₁/c witha=930.2,b=863.0,c=1575.2 pm, =90.27, andZ=4. The molecules are bridged to chains; therefore, Sb reaches the coordination number 3+3 (+3).

     

Alkaline Earth Transition Metal Antimonides AT4Sb12 (A = Ca,Sr, Ba; T = Fe,Ru, Os) with LaFe4P12-Structure

The title compounds were prepared by reaction of CaSb₂, SrSb₂, or BaSb₃ with the transition metals and antimony in sealed silica tubes. They crystallize with the cubic LaFe₄P₁₂-structure, which was refined from single-crystal X-ray data of CaFe₄Sb₁₂, SrRu₄Sb₁₂, and BaRu₄Sb₁₂ to residuals of R = 0.014, 0.016, and 0.014, respectively. The thermal parameters of the alkaline earth ions increase with decreasing ionic size. The Sb? Sb distances are greater in the iron compound than they are in the two ruthenium compounds. This is rationalized to be due to a larger portion of electrons in antibonding Sb? Sb states in the iron compound.     

Antimontribenzoat

Zusammenfassung Das -Isomer des Antimontribenzoats kristallisiert rhomboedrisch (hexagonale Aufstellung) in der Raumgruppe R3 mita=1944.0 pm,c=422.3 pm undZ=3. Die Moleküle sind parallel zu 001 gestapelt. Sb hat gegenüber O die Koordinationszahl 3+3 (Sb-O: 208 bzw. 256 pm).

---

Antimonytribenzoate

Summary The isomer of (C₆H₅CO₂)₃Sb crystallizes rhombohedrally (hexagonal axes) in the space group R3 witha=1944.0 pm,c=422.3 pm, andZ=3. The molecules are stacked parallel to 001; Sb has a coordination number of 3+3 (Sb-O: 208 and 256 pm, resp.).

     

Photoelectron core levels for enargite,Cu3AsS4

The mineral chemistry of enargite surfaces and near‐surfaces prepared by fracture within an ultrahigh vacuum are investigated using XPS and synchrotron radiation XPS (SRXPS). The purpose of the study is to identify surface core‐level line positions in high‐resolution photoelectron spectra. The XPS spectra obtained using monochromatic Al Kα radiation show that there are near‐identical monosulphide line positions in S 2p spectra for the As–S and Cu–S bonds in enargite. The SRXPS spectra for sulphur are remarkably similar to the XPS spectra for sulphur, showing that there is minimal difference in the chemical environment between sulphur atoms at the surface and in the mineral matrix. The Cu 2p XPS data have only cuprous contributions and a minor surface contribution. The surface Cu contribution is observed as a high‐binding‐energy tail in the Cu 2p_3/2 spectrum. The As 3d data for both XPS and SRXPS show contributions from arsenic atoms at the surface and in the bulk mineral matrix. The surface contribution is distinct and is found 1 eV below the bulk contribution. The results of the study suggest that, following fracture, the enargite surface is reorganized in such a manner that the surface is characterized by protrusions of individual arsenic atoms. Copyright © 2004 John Wiley & Sons, Ltd.