A new study of the enzymatic hydrolysis of carboxymethyl cellulose with a bulk acoustic wave sensor

A new bulk acoustic wave (BAW) cellulase sensing technique, which is based on the enzymatic hydrolysis process of sodium carboxymethylcellulose (CMC) by cellulase, was established. The frequency shift curves of BAW sensor indicated that the viscosity of the tested solutions decreased during the hydrolysis process. The hydrolysis rate of CMC by cellulase was calculated from the frequency shift curves. The hydrolysis rate of CMC under different pH conditions at 30°C showed that cellulase had high hydrolysis ability approximately at pH 5.0. Kinetic parameters (the Michaelis constant K_m and the maximum rate V_max) of the process were estimated by using a linear method of Lineweaver–Burk plot. K_m is 1.95±0.25 mg ml⁻¹ and V_max is −(4.25±0.58)×10⁻³ g^1/2 cm^−3/2 cP^1/2 min⁻¹. Also the activation energy (E_a) of the enzymatic hydrolysis, with a value of 51.99±1.26 kJ mol⁻¹, was estimated in this work.     

传感器测温实验装置的研制

本文介绍了一个新型物理实验装置,把传感器引入了实验教学。此项实验物理方法丰富且具有设计性质。     

苦味酸荧光光化学传感器在药物分析中的应用

苦味酸水浴液对固定在增塑的聚氯乙烯（ＰＶＣ）膜中的蒽有可逆荧光熄灭作用，据此研制了测定苦味酸的荧光光化学传感器。该传感器的敏感膜的最佳组成为６～８ｍｇ蒽、５０ｍｇＰｖＣ粉、１００ｍｇ邻苯二甲酸二异辛酯。测定苦味酸的浓度范围为３．０４×１０￣（－６）～６．１６×１０￣（－３）ｍｏｌ／Ｌ，重现性良好，响应时间为５～４０秒，该传感器选择性好，许多常见亲脂明离子不干扰测定，可用于药物奎宁及辛可宁的间接测定。     

A Novel Proton Sensor with Luminescence and Color Signaling Based on Platinum(II) Terpyridyl Acetylide Complex

Molecular switches that are controllable, reversible and readable at molecular level are an essential compo-nent of molecular electronics1 and chemical sensors.2-6 Of particular interest are the molecules which show dramatic and reversible changes in color and/or lumi-nescence in visible spectral region upon exposure to specific substrates. A number of chromophore- spacer-receptor systems that can selectively recognize specific guest molecules at their receptor site and pro-duce measurable col…     

Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.     

In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

检测易爆气体的催化发光传感器研究

报道了一种用于定量分析易爆气体混合物丙烷和异丁烷的基于碳酸锶纳米材料的催化发光传感器。基于该传感器在不同温度下对两种气体的灵敏度不同，在320℃和342℃两个工作温度下，两种气体的浓度范围均为1000mL／m^3～10000mL／m^3时，分别建立了混合组分浓度相对催化发光强度的两个线性回归方程。在342℃时，丙烷和异丁烷的检出限（3σ）分别为50mL／m^3和20mL/m^3。可通过解上述两个联立方程式求得未知混合物中两组分的浓度。外来物质甲烷、乙烷、CO、氨气通过传感器时，甲烷和乙烷分别引起5．6％和17．2％的干扰，其它气体不干扰测定。20000mL／m^3的水蒸气不干扰2000mL／m^3丙烷和异丁烷气体的测定。用该法分析了人工合成样品中两种气体的浓度。     

Membrane-oxide semiconductor field-effect transistor (MOSFET) sensors

MOSFET-sensors can be considered as membrane-oxide-semiconductor field-effect transistors. MOSFETs can be divided into ISFETs, GasFETs, BioFETs, these sensors being sensitive to ion, gas, biomolecules respectively and there is also a possibility to fabricate MOSFET reference electrode (RefFET). The development and theoretical treatment of various type of MOSFET-sensors are presented in this paper.     

Chemical diffusion of oxygen in tin dioxide: Effects of dopants and oxygen partial pressure

Tin dioxide SnO_2−δ is a pronounced n-type electron conductor due to its oxygen deficiency. This study investigates the rate of chemical diffusion of oxygen in SnO_2−δ single crystals, which is a crucial step in the overall stoichiometry change of the material. The chemical diffusion coefficient D^δ was determined from conductivity- and EPR-relaxation methods. The temperature dependence was found to be . The dependence on crystal orientation, dopant content and oxygen partial pressure was below experimental error. The latter observation leads to the conclusion that the chemical diffusion coefficient is close to the diffusion coefficient of oxygen vacancies. Along with the relaxation process resulting from the chemical diffusion of oxygen, additional processes were observed. One of these was attributed to complications in the defect chemistry of the material. The relevance of the results for the kinetics of drift processes of Taguchi sensors is discussed.     

Detection of Tumor Necrosis Factor Gene by Piezoelectric Nucleic Acid Senosr

A piezoelectric nucleic acid sensor was constructed ofr detection of tumor necrosis factor gene.Two methods were employed for immobilization of nucleic acid probe on gold electrode of piezoelectric crystal.The results show that polyethyleneimine adbesion and glutaraldehyde cross-linking method has higher sensitivity,stability and selectivity than protein A method.The solid-phase nucleic acid hybridization of oligo unclecotides and tumor necrosis factor target gene sequence were monitorde using this sensor.Tumor necrosis factor gene sequence(580bp) was detected by this nucleic acid sensor for the first time.