热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

高分子钯络合物催化的亚胺化合物的加氢反应

制备了一系列以二氧化硅为载体的侧链上含有各种氮配位基团的聚硅氧烷-钯络合物,这些高分子钯络合物能够在常温常压下催化亚胺化合物的加氢反应并表现出不同程度的催化活性.对其中聚-(N,N-二乙酰基)-γ-氨丙基硅氧烷-钯络合物催化的亚苄基苯胺的加氢反应做了比较深入的研究,发现该催化剂在反应中是稳定的并给出唯一的加氢产物,络合物中的N/Pd原子比、反应温度以及不同底物对反应速度的影响也被报道.     

含柔性间隔基的热致液晶性共聚酯的结晶形态

采用偏光显微镜、扫描和透射电镜从不同层次的结构水平上研究了含柔性间隔基热致液晶性共聚酯的结晶形态。在偏光显微镜下观察到典型的负光性球晶形态,透射电镜揭示了球晶是由厚度为10nm并沿着径向生长的片晶结构所组成,分子链沿晶片厚度方向取向排列。并研究了分子链的刚性程度对热致聚芳酯结晶性质的影响。结果表明,分子链刚性越大其结晶性和球晶的完善性越高。     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

微波干法催化芳香醛与绕丹宁及N-苯基绕丹宁的缩合反应

利用微波辐射和固体碱性载体试剂催化绕丹宁及N-苯基绕丹宁和芳香醛的缩合反应合成了14个绕丹宁衍生物并研究了影响反应的因素。     

Reaction of salicyl phosphites with hexafluoroacetone imine

Benzo-1,3,2,dioxaphosphorin-4-ones react with hexafluoroacetone imine to form 2-R-2,5-dioxo-3,3-bis(trifluoromethyl)-6,7-benzo,1,4,2-oxozaphosphepanes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No, 12, pp. 3008–3010, December, 1996.     

主链含硅聚芳酯的合成及气体透过性能的研究

以双［对－酰氯苯基］二甲基硅烷和酚酞、四溴酚酞以及双酚Ａ为原料，合成了三种主链含硅聚芳酯，并对聚合物相关的物理性质进行了表征，制成了均质透明的薄膜．采用低真空法测定这些聚合物对Ｈ２、Ｏ２、Ｎ２、ＣＯ２、ＣＨ４的气体透过速率，并计算出气体透过系数、扩散系数、溶解系数、分离系数．从气体透过性能与聚合物分子结构关系的角度，按照气体透过的溶解－扩散机制，对聚合物的气体透过性能进行了研究，而且着重讨论了聚合物的堆积密度对气体扩散系数的影响，以及聚合物主链中极性链段的百分含量对气体溶解系数和溶解选择性的影响。     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅦ. THE POLYMERIZATION KINETICS OF CYANOPYRIDINES AND CHARACTERIZATION OF THE FORMED POLYMER*

The polymerization rates of three cyanopyridines catalyzed by cuprous chloride-zinc system are measured, and the structure of the formed polymer is also determined. Compared with aromatic nitrile, cyanopyridines polymerize faster and form polyconjugated polymer with skeleton—(C=N)—_n instead of triazine structure. This chain-polymer possesses semiconductive property, and can be converted into conductive material by thermal treatment. In addition, the polymerization kinetics of 3-cyanopyridine catalyzed by 3-cyanopyridinium perchlorate is investigated. It is found that the polymerization rate is directly proportional to the concentrations of monomer and catalyst, and the activation energy of the polymerization is 103.1 KJ/mol.     

Reactions of isomeric 3,6- and 3,5-di-tert-butyl-ortho-benzoquinones with NH3

The interaction of 3,6-di-tert-butyl-ortho-benzoquinone (1) and 3,5-di-tert-butyl-ortho-benzoquinone (2) with NH₃ in water—alcohol medium and with (NH₄)₂CO₃ in a solid phase has been studied. Redox processes with participation of a nucleophile of the medium take place for1, while2 reacts with NH₃ at the carbonyl group with transformation of the quinone imide. The mechanism of redox transformation of1 has been proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1789–1793, September, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No. 94-03-08653).     

含二苯甲烷结构四元共缩聚杂萘聚芳酰胺的合成与性能

采用自制二胺1,2-二氢-2-(4-氨基苯基)-4-[4-(4-氨基苯氧基)-苯基]-二氮杂萘-1-酮、商品二胺4,4′-二氨基二苯甲烷和对苯二胺与对苯二甲酰氯进行低温溶液缩聚反应,改变三种二胺的比例,得到了一系列共聚酰胺树脂,其特性粘数为1·24~2·32dL/g,用FT-IR、1H-NMR手段研究了聚合物的结构;利用DSC和TGA研究了聚合物的耐热性能,结果表明,该类聚合物具有较高玻璃转化温度(301℃以上);氮气气氛中5%热失重温度在438℃以上;用一定比例的二胺制得的聚合物分别能溶于N-甲基吡咯烷酮、N,N-二甲基乙酰胺等非质子极性溶剂中并浇注得到韧性薄膜.