泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

Synthesis and crystal structure of 4-acetoxy-5,6-dihydro-5,5-dinitro-2H-1,3-oxazineN-oxide

A novel heterocyclic compound, 4-acetoxy-5,6-dihydro-5,5-dinitro-2H-1,3-oxazineN-oxide, has been synthesized by the reaction of the dipotassium salt of 1,1,5,5-tetranitro-3-oxapentane with aqueous acetic acid. The synthesized compound has been studied by X-ray diffraction analysis.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2207–2210, December, 1994.We would like to thank G. V. Lagodzinskaya (Institute of Chemical Physics in Chernogolovka, Russian Academy of Sciences) for recording and interpreting¹H NMR spectra, A. M. Korolev (Institute of Chemical Physics in Chernogolovka, Russian Academy of Sciences) for helpful discussion, and V. I. Fetisov (Institute of Physiologically Active Compounds, Russian Academy of Sciences) for performing quantum-chemical calculations by the AM1 SCF MO LCAO method.     

杂多酸的固载化─关于制备负载型酸催化剂的一般原理

杂多酸同时具有酸和氧化－还原的催化特性，有着很广泛的应用前景．这类化合物在一系列精细合成中取代硫酸作为催化剂以满足环保的要求，显示出了很大的潜力．杂多酸固载化后，不仅能在液相氧化和酸催化反应中把催化剂从反应介质中很方便地分离出来，而且还为这类均相催化反应的多相化，甚至利用催化蒸馏新工艺等创造了应有的条件，可以使生产工艺大大简化，获得更广泛的应用．本文以很好表征过的多种孔性材料，包括氧化物，如Ａｌ_２Ｏ_３、ＳｉＯ_２、ＴｉＯ_２、硅藻土、膨润土和来源不同的活性炭为载体，考察了负载杂多酸催化剂的催化活性．在大量前期工作的基础上，通过总结载体对固载杂多酸催化活性的影响等，探讨载体的内在性质在杂多酸固载、吸附和催化反应中的作用本质，为由吸附法制备各种负载型固体酸催化剂在液相中的应用提供可资参考的模型．     

关于meso—四苯基卟啉在冰醋酸中的存在形式

前言卟啉在生物化学、分析化学、药物化学等领域有着广泛研究和重要应用［１～３］。近年来虽然对卟啉类化合物的研究报道很多［４～６］，但对卟啉在酸性介质中的研究很少。较早期的研究工作认为卟啉类化合物在酸性介质中仅以其二酸形式存在［７］。本文实验结果显示ｍｅ...     

1''-苯基-3''-甲基-5''-氧代吡唑-4''-基乙醛酸希土配合物的合成及性质研究

本文采用电导、pH滴定法研究了乙醇-水溶液中希土与1′-苯基-3′-甲基-5′-氧代吡唑-4′-基乙醛酸(简称H₂A)的配位反应.合成了15种新的希土固态配合物.通过元素分析、化学分析、水份分析确定了配合物的化学组成为RE(HA)₃·nH₂O(RE=Ce、Pr、Sm、Tm、Lu、n=1;RE=La、Nd、Eu、Gd、Tb、Dy、Ho、Er、Yb、Y,n=1-2).并对配合物的红外光谱、核磁共振谱、热稳定性、紫外光谱、溶解性及摩尔电导进行了测定.     

Some Conversions of Thiazoline Carboxylic Acid Esters

We have carried out solvolysis of the previously described ethyl esters of 3-methyl(aryl)-4-methyl-2-thioxothiazoline-5-carboxylic acids, leading to the corresponding acids without breaking down the heterocycle. We synthesized a series of novel esters from the latter by treatment with dimethyl sulfate or reactive halides. Of these, only in the case of the ethyl ester of 3,4-dimethyl-2-thioxothiazoline-5-carboxylic acid did we obtain the hydrazinolysis product (the hydrazide), from which we synthesized novel hydrazones by treatment with aldehydes and ketones.     

Dynamic Interfacial Tension Behavior of Water/Oil Systems Containing In situ-Formed Surfactants

Time-dependent interfacial tension (IFT) has been investigated for an interfacially reactive immiscible system composed of model-acidified oil and alkaline water. The acidified oil was composed of either lauric acid or linoleic acid dissolved in n-dodecane. Drop volume tensiometry was employed to measure the interfacial tension between the two phases. In the case of lauric acid, the IFT value was found to decrease sharply with increasing alkali concentration, even at low drop formation times. In the case of linoleic acid, the IFT decrease with the drop formation time was more gradual, especially at low alkali concentration. The rate of formation of the interfacial area was also found to be dependent on alkali concentration.     

Reaction of 3-Benzoyl-2,3-dibromopropionic Acid with Substituted ortho-Phenylenediamines

3-Benzoyl-2,3-dibromopropionic acid reacts with 4-substituted o-phenylenediamines to give 3-aryl-2-carboxymethylene-1,2-dihydroquinoxalines.