Counterion-accelerated diffusion of aqueous serum albumin

A modified Harned conductimetric procedure has been used to measure binary diffusion coefficients at 25°C for aqueous sodium and potassium salts of the protein bovine serum albumin (M _n BSA; M=Na⁺ or K⁺; n=2 to 23). The condition of electroneutrality requires that the BSA ions diffuse at the same speed as the relatively mobile sodium or potassium counterions. Consequently, the protein ions diffuse 3 to 8 times more rapidly than the isoionic protein diffuses. An approximate analysis of counterion-accelerated diffusion of high molecular weight solutes is presented which shows that the increase in diffusivity with the number of counterions is a thermodynamic effect brought about by an increase in the free energy gradient of the solutes.     

Mössbauer Investigation of Electrodeposited Sn–Zn,Sn–Cr,Sn–Cr–Zn and Fe–Ni–Cr Coatings

⁵⁷Fe and ¹¹⁹Sn CEMS, XRD and electrochemical measurements were used to investigate the effect of the preparation parameters and the components on the structure and phase composition of electrodeposited Fe-Ni-Cr alloys in connection with their corrosion behavior. XRD of the electrodeposits reflect an amorphous-like character. ⁵⁷Fe CEM spectra of Fe-Ni-Cr electrodeposited samples, prepared in a continuous flow plating plastic circulation cell with variation of current density, electrolyte velocity and temperature, can be evaluated as a doublet associated with a highly disordered paramagnetic solid solution phase. This phase was identified earlier in Fe-Ni-Cr electrodeposits that were prepared by another plating method and contained both ferromagnetic and paramagnetic metastable phases [1]. This is the first time that we have succeeded to prepare Fe-Ni-Cr alloys containing only the metastable paramagnetic phase. The effect of the plating parameters on the structure is also analysed by the quadrupole splitting distribution method. ¹¹⁹Sn CEM spectra of all Sn-containing plated alloys show a broad line envelop which can be decomposed at least into two components. One can be associated with β-tin. The other one can be assigned to an alloy phase. The structure and distribution of microenvironments of these phases depends on the plating parameters especially on the parameters of the reverse pulse applied. This revised version was published online in August 2006 with corrections to the Cover Date.     

A comparative study of different concentrations of pure Zn powder effects on synthesis,structure, magnetic and microwave-absorbing properties in mechanically-alloyed Ni–Zn ferrite

In this study, a powder mixture of Zn, Fe₂O₃ and NiO was used to produce different compositions of Ni_1−xZn_xFe₂O₄ (x=0.36, 0.5 and 0.64) nanopowders. High-energy ball milling with a subsequent heat treatment method was carried out. The XRD results indicated that for the content of Zn, x=0.64 a single phase of Ni–Zn ferrite was produced after 30 h milling while for the contents of Zn, x=0.36 and 0.5, the desired ferrite was formed after sintering the 30 h-milled powders at 500 °C. The average crystallite size decreased with increase in the Zn content. A DC electrical resistivity of the Ni–Zn ferrite, however, decreased with increase in the Zn content, its value was much higher than those samples prepared by the conventional ceramic route by using ZnO instead of Zn. This is attributed to smaller grains size which were obtained by using Zn. The FT-IR results suggested two absorption bands for octahedral and tetrahedral sites in the range of 350–700 cm⁻¹. The VSM results revealed that by increasing the Zn content from 0.36 to 0.5, a saturation magnetization reached its maximum value; afterwards, a decrease was observed for Zn with x=0.64. Finally, magnetic permeability and dielectric permittivity were studied by using vector network analyzer to explore microwave-absorbing properties in X-band frequency. The minimum reflection loss value obtained for Ni_0.5Zn_0.5Fe₂O₄ samples, about −34 dB at 9.7 GHz, making them the best candidates for high frequency applications.     

Tetraalkylammonium Ions in Aqueous and Non-aqueous Solutions

Property data for tetraalkylammonium cations, [H(CH₂) _n ]₄N⁺, are reviewed. They pertain to the isolated cations and their transfer from the gas phase into aqueous solutions. Various properties of these cations in aqueous and non-aqueous solutions and data for their transfer between these are also reviewed. Emphasis is placed on the dependence of data on the length n of the alkyl chains rather than on the absolute values. Most of the data are available only for the first four members of the series. The properties of the isolated ions increase linearly with the chain length. Molar enthalpies of formation of the gaseous and aqueous cations, and absolute standard molar enthalpies of hydration, are derived. Standard molar entropies of dissolution of several salts in water are obtained from their solubilities and enthalpies of solution. The molar entropies of the crystalline iodides of the first four members of the series then give the standard partial molar entropies of the aqueous cations and their molar entropies of hydration. The standard partial molar volumes in aqueous and non-aqueous solutions are quite linear with n and in non-aqueous solutions the molar volume hardly depends on the nature of the solvent. On transfer from water to non-aqueous solvents the volume of Me₄N⁺ suffers some shrinkage, that of Et₄N⁺ appears to be unaffected, but from Pr₄N⁺ onwards an increasing expansion takes place. This unexpected result is tentatively explained by hydrophobic intra-molecular association of pairs of alkyl chains in aqueous solutions, resulting in a tightening of the structure. The transfer of the R₄N⁺ cations from water into non-aqueous solvents is governed by a large positive entropy change, outweighing the smaller positive enthalpy change. The transport properties of the aqueous R₄N⁺ cations are non-linear with n. A major impediment to movement is thus the sticking of the water molecules to the ice-like hydrophobic hydration sheaths of the larger cations. The number of water molecules affected by the hydrophobic cations is open to widely differing estimates resulting from various approaches, and constitute an open issue.     

Evidence of change in the molecular organization of 1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid solutions with the addition of water

Physico-chemical properties of ionic liquids like density, viscosity, conductivity, surface tension and excess molar volume are strongly dependent on their concentration in aqueous solutions. 1-n-Butyl-3-methylimidazolium tetrafluoroborate/water solutions, at 25 °C, shows two clearly distinguished behaviors, corresponding to a water-rich and a salt-rich region, with distinct physico-chemical properties. It is shown that [BMIm][BF₄] exhibits surfactant properties. The results obtained are discussed in terms of the interactions between cations and anions of the ionic liquid and the water molecule. IR studies show that the addition of water modifies the organization of the ionic liquid molecules. The data collection reported is helpful for a variety of different technological applications and in particular for electrochemical applications, as capacitors, batteries and fuel cells among others.     

A new simple sensitive differential pulse polarographic method for the determination of acrylamide in aqueous solution

A new simple sensitive differential pulse polarographic (DPP) method was investigated for the determination of acrylamide (AA) directly in a neutral aqueous solution. The AA showed a well-defined and well-resolved peak in pure aqueous LiCl at −1.84 V in the potential range from −1.6 V to −1.97 V at nitrogen pressure of 0.5 kg cm⁻². Among the various electrolytes studied, the AA showed good DPP response in the presence of LiCl and tetra methyl ammonium iodide, while it showed poor response in the presence of tetra butyl ammonium hydroxide and tetra butyl ammonium bromide due to their strong adsorption on the surface of electrode which hindered its reduction. The effect of LiCl concentration, the cyclic voltammetric response and the drop time study showed that AA exhibited an irreversible adsorptive electrochemical behavior. The good electrochemical response in pure aqueous medium suggested that hydrogen bonding might be involved which may favor the electrode reaction. Under optimized conditions, the peak current was linear in the entire concentration range from 0.2 mg L⁻¹ to 20 mg L⁻¹ with the correlation coefficient of R² = 0.9998. The method showed good reproducible results with R.S.D. of 0.3% (n = 16). The detection limit (LOD) was 27 μg L⁻¹. The influence of various interfering agents was also studied. The method was applied successfully for the quantification of AA in water samples without any interference effect from alkali metals.     

Total synthesis of (±)-camphorataimides and (±)-himanimides by NaBH4/Ni(OAc)2 or Zn/AcOH stereoselective reduction

Maleic anhydride 1 of Antrodia camphorate, which can be isolated from Chinese herbal medicine, is achieved in which the longest linear sequence is only five steps, in 40% overall yield from commercially available succinic anhydride. The crucial antrodimides 3 and 2 can be readily transformed by the chemoselective reduction with Zn/AcOH and NaBH₄/Ni(OAc)₂·4H₂O to afford the naturally occurring camphorataimides, 4 and 5, in high yields as well, respectively. This synthetic strategy can also be modified to give access to a variety of different maleic acid derivatives, himanimides 6-8.     

Synthesis of aryl-hydrazones via ultrasound irradiation in aqueous medium

The synthesis of aryl-hydrazones from aromatic aldehydes/ketones and hydrazides (semicarbazide, thiosemicarbazide and aminoguanidine) is described using aqueous medium (acid conditions) under ultrasound irradiation with short reaction times (20-30 min), the reactions occurring at room temperature and giving rise to good to excellent yields of the products, along with the diastereoselectivities. The procedure is also simple and clean.     

An extension of the Pitzer equation for the excess Gibbs energy of aqueous electrolyte systems to aqueous polyelectrolyte solutions

Pitzer's equation for the excess Gibbs energy of aqueous solutions of low-molecular electrolytes is extended to aqueous solutions of polyelectrolytes. The model retains the original form of Pitzer's model (combining a long-range term, based on the Debye–Hückel equation, with a short-range term similar to the virial equation where the second osmotic virial coefficient depends on the ionic strength). The extension consists of two parts: at first, it is assumed that a constant fraction of the monomer units of the polyelectrolyte is dissociated, i.e., that fraction does not depend on the concentration of the polyelectrolyte, and at second, a modified expression for the ionic strength (wherein each charged monomer group is taken into account individually) is introduced. This modification is to account for the presence of charged polyelectrolyte chains, which cannot be regarded as punctual charges. The resulting equation was used to correlate osmotic coefficient data of aqueous solutions of a single polyelectrolyte as well as of binary mixtures of a single polyelectrolyte and a salt with low-molecular weight. It was additionally applied to correlate liquid–liquid equilibrium data of some aqueous two-phase systems that might form when a polyelectrolyte and another hydrophilic but neutral polymer are simultaneously dissolved in water. A good agreement between the experimental data and the correlation result is observed for all investigated systems.