Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

四磺酸基酞菁锌在水和非水溶剂中的电化学性质研究

在非水溶剂（二甲基亚砜（ＤＭＳＯ）及Ｎ,Ｎ＿二甲基甲酰胺（ＤＭＦ））中的伏安曲线．呈现三对电流峰,表明存在三个可逆或准可逆酞菁配体的单电子转移过程,而在水溶液中则不呈现准可逆行为,且波形改变很大．此外,还比较了四磺酸基酞菁锌的水溶液在自然光和红光（６００～７００ｎｍ）照射下的循环伏安曲线,其氧化还原峰的数目和峰电位基本不变,但在红光照射下比自然光照射下的峰电流明显增大．     

Synthesis and characterization of Cu,Ni and Zn binding capability of some amino- and imidazole hydroxamic acids: Effects of substitution of side chain amino-N for imidazole-N or hydroxamic-N-H for -N-CH3 on metal complexation

Solution equilibrium studies on Cu(II)-, Ni(II)- and Zn(II)-N-Me-β-Alaninehydroxamic acid (N-Me-β-Alaha), -N-Me-α-alaninehydroxamic acid (N-Me-α-Alaha), -Imidazole-4-carbohydroxamic acid (Im-4-Cha), -N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha) and -Imidazole-4-acetohydroxamic acid (Im-4-Aha) systems have been performed by pH-potentiometry, UV–Vis spectrophotometry, EPR, CD, ESI-MS and ¹H NMR methods. According to the results: (i) the amino-N atoms are more basic in N-Me-α-Alaha and N-Me-β-Alaha than the hydroxamate function, but the trend is just the opposite between the imidazole-N(3) and hydroxamate. (ii) The metal ion anchor is always the hydroxamate part in the amino acid derivatives, while it is always the imidazole-N(3) in the studied imidazolehydroxamic acids. (iii) The three studied N-Me derivatives do not form metallacrowns. Only hydroxamate type chelate is formed with N-Me-β-Alaha, but with N-Me-α-Alaha a new type of coordination mode (via amino-N and hydroxamate-O) also exists. N-Me-Im-4-Cha also forms a dinuclear complex, [M₂L₃], with Cu(II) and Ni(II) (but not with Zn(II)). In this complex, one of the three ligands might bridge the two metal ions (five-membered hydroxamate-(O,O) plus five-membered (N_im, O_carb) bridging bis-chelating mode), while each of the additional two ligands binds to one metal. (iv) The two studied N–H derivatives, having dissociable proton on the hydroxamic-N, are able to form metallacrown species. A pentanuclear complex, [M₅L₄H₋₄], is exclusively formed above pH 4 between Cu(II) and Im-4-Aha. Interestingly, this 12-metallacrown-4 type complex, although together with various mononuclear binding isomers, appears also with Ni(II) and Zn(II). Unfortunately, the complexes of Im-4-Cha are not soluble in water at physiological pH at all.     

ICP-AES法测定锌阳极中的铝、镉、铁、铜、铅

通过分析高频功率、雾化压力、辅助气流量和泵速等试验条件，建立了ICP-AES法测定锌阳极中铝、镉、铁、铜、铅的方法。用该方法测定锌阳极中的铝、镉、铁、铜、铅，其RSD分别为0.17%、0.63%、2.7%、5.2%、2.5%，回收率分别为99.3%-101.2%，99.3%-100.3%、97.1%-102.2%、97.8%-102.9%。对锌阳极试样进行测定，该方法的测定结果与GB4951-85方法的测定结果基本一致。     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

Acceleration of the Passerini reaction in the presence of nucleophilic additives

An accelerating effect of nucleophilic additives was revealed for the Passerini multi-component reaction. The influence of aqueous solutions on the reaction rate was studied in detail and the direct involvement of water in the bond-making step was attributed as the basis of an accelerating effect. Other nucleophiles were tested as alternatives to water; as a result N-hydroxysuccinimide is proposed as an accelerant of the Passerini reaction.     

Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.     

Quantification of volatile PAHs present at trace levels in air flow by aqueous trapping—SPE and HPLC analysis with fluorimetric detection

In the context of a European project, a new approach of sampling of volatile polycyclic aromatic hydrocarbons (PAHs) from air was developed. In fact, the aim of this project was to test the efficiency of an air cleansing prototype reactor, which was operating by non-thermal plasmolysis. With an eye to model the atmosphere ejected by the prototype, we needed to vaporise the volatile PAHs in an air stream at concentrations as low as those recommended by European Directives (96/62/CE) for PAHs in ambient air (i.e. 1 ng m⁻³). Our strategy was based on the analysis of PAHs trapped in an aqueous medium, in order to avoid important losses of volatile compounds observed during the delicate desorption-concentration step when classical solid supports are used. Then a study was carried out to determine: the design of the collecting part, the flow-rate of the air sampling, the nature and concentration of chemical additives used to enhance PAH solubility in water. The very highly diluted aqueous media obtained after the bubbling step were concentrated by solid-phase extraction (SPE) on hydrophobic cartridges and analysed on-line by reversed-phase HPLC with UV and fluorimetric detections. Lastly, the sampling technique was directly applied to the outlet of the air cleansing prototype and the analysis after 3-6 h of non-thermal plasmolysis showed that the target volatile PAHs were not present in an air stream initially polluted by volatile organic compounds.     

预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明，丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性，而且芳构化主要转化为苯；载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度，从而表现出最佳的芳构化性能；随着锌含量的增加，Zn/Al-CLM催化剂的酸量增大，从而使丙烷转化率增大，而选择性则是锌含量质量分数为5．8％时具有极大值；400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用，从而使得Zn/Al-CLM具有较高的芳烃收率。