Salt-induced aggregation in cationic liposome aqueous suspensions resulting in multi-step self-assembling complexes

The interaction of uni-univalent salt with cationic liposomes in aqueous suspension has been investigated by means of dynamic light scattering measurements and the hydrodynamic radius of the resulting aggregates has been evaluated for different ionic strengths. We observe the simultaneous presence of two different steady-state structures, in the 100–500 nm and 5 μm range, respectively, whose relative concentrations depend on the salt content. This behavior differs from that observed in usual charge stabilized colloidal suspensions and that giving rise to lipoplex formation in presence of polynucleotides. This peculiar behavior is briefly discussed in the light of Derjaguin–Landau–Verwey–Overbeek (DLVO) colloidal stability theory.     

Cd(II) determination in the presence of aqueous micellar solutions

The equilibrium constants and molar absorptivities for the fast formation of a 1:3 complex between cadmium(II) (Cd(II)) and dithizonate anion, in the presence of cationic and non-ionic surfactants, allowed a simple and fast spectrophotometric determination of total cadmium. Indeed, the molar absorptivities of the Cd(II)-dithizone (Dz) complex formed in the presence of the neutral Triton X-100 and cationic cetyltrimethylammonium bromide (CTAB) surfactants are almost twice the value observed in the standard method and the maxima of absorption are shifted by about 40 nm when compared with the standard method. Clearly, the use of neutral and cationic surfactants promotes a higher value of the molar absorptivities of the complex, resulting in an increase in the sensitivity of the method. Application of the method to the desorption of Cd(II) ions from clays is illustrated.     

Zn(II)-selective membrane electrode based on tetra(2-aminophenyl) porphyrin

A new PVC membrane electrode for Zn²⁺ ions based on tetra(2-aminophenyl) porphyrin (TAPP) as membrane carrier is prepared. The sensor exhibits a linear stable response over a wide concentration range (5.0×10⁻⁵ to 1.0×10⁻¹ M) with a slope of 26.5 mV/decade and a limit of detection 3.0×10⁻⁵ M (1.96 ppm). It has a response time of about l0 s and can be used for at least 8 months without any divergence in potential. The propose membrane sensor revealed good selectivities for Zn²⁺ over a wide variety of other metal ions and can be used in pH range of 3.0–6.0. It was successfully applied to the direct determination of zinc in a pharmaceutical sample and also as an indicator electrode in potentiometric titration of Zn²⁺ ions.     

Structural investigation of dibromobis(benzimidazole)Zn(II) complex

The molecular structure of the title complex [ZnBr₂(C₇H₆N₂)₂] was investigated by X-ray diffraction and IR spectroscopy methods. Molecules of zinc(II) complex crystallize in the triclinic crystal system with cell constants a=7.526(2) Å, b=7.8971(8) Å, c=13.431(1) Å, Z=2 and V=791.3(2) Å³. In the molecular structure, the Zn atom is coordinated tetrahedrally by two Br⁻ anions and two benzimidazole ligands. Intramolecular steric repulsions between Br⁻ anions and benzimidazole groups have been caused to cis configuration around the central metal atom.     

电沉积条件对锌镀层织构的影响

采用ＸＲＤ方法研究添加剂，络合剂，以及电流密度对锌酸盐镀锌层的织构和晶粒尺寸的影响，结果表明，添加剂ＡＡ－１的存在有利于（１０１）晶面取向；而ＤＩＥ则使镀层转变为１１０择优；两种添加剂同时存在下，可在一定的电流密度范围内获得高择优取向的锌镀层，而当又有络合剂ＴＥＡ和ＥＤＴＡ同时存在时，则可在更宽广的电流密度范围内制得日 粒细密、表面光亮、择优系数ＴＣ（１１０）在９８５以上的高择优取向锌沉积层。     

外加盐作用形成的正负离子表面活性剂双水相

癸基三乙基溴化铵-癸基磺酸钠（C10NE-C10SO3）等摩尔混合均相体系（即使在表面活性剂总浓度高达0.2 mol•L－1时仍然可形成稳定的均相溶液）在外加盐NaF、Na2SO4和Na3PO4的作用下可自发分离成两个水相（双水相）.研究了该类双水相体系的形成、相行为及其对牛血清蛋白（BSA）的分配，并与普通的正负离子表面活性剂混合双水相体系进行了比较.结果表明，该类双水相体系克服了普通的正负离子表面活性剂混合双水相体系的一些不足，具有一些独特的优点.该类双水相体系的相行为可以通过外加盐进行调控,通过外加盐的种类来调控和优化BSA的分配行为.图1表2参8     

Highly efficient water promoted allylation and propargylation of arylepoxides via rearrangement-carbonyl addition

A simple and highly efficient one-pot procedure for allylation and propargylation of arylepoxides has been developed. A combination of SnCl₂ and catalytic Pd(0) or Pd(II) promotes the reaction of organic halides and epoxides in DMSO with controlled water addition, leading to the regioselective formation of the corresponding homoallyl and homopropargyl alcohols in good yields.     

A Clean Synthesis of 1,4‐Diarylquinoline Derivatives Catalyzed by TEBAC in Aqueous Media

A series of 1,4‐diarylquinoline derivatives were synthesized by the reaction of arylmethylidenemalononitriles or 2‐cyano‐3‐aryl‐1‐acrylate and 3‐arylamino‐5,5‐dimethylcyclohex‐2‐enone in aqueous media at 100 °C catalyzed by TEBAC. Meanwhile, the water medium was chosen as green solvent.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.