Solvation of small hydrophobic molecules in formamide: A calorimetric study

The solubility and enthalpy of solution of benzene, cyclohexane, hexane, and heptane in formanide have been determined from titration microcalorimetric experiments at 25°C. The solution enthalpies are significantly more endothermic than in water but still the solubility is much higher. The entropy changes in formamide are small and positive and do not vary significantly with size. The enthalpies of solution of some 1-alkanols, 1-chloro- and 1,5-dichloropentane and pentane-1,5-diol were measured as functions of concentration. The solution enthalpies for 1-alkanols from methanol to decanol increase linearly with chain length. The enthalpic interaction coefficients h_xx are small and negative in formamide while they are large and positive in water. The partial molar heat capacities C _p,2 ^o for 1-propanol, 1-pentanol, benzene and cyclohexane in formamide were determined at 25°C from drop heat capacity measurements. Values of C _p,2 ^o are only slightly larger than the molar heat capacities of the liquid solutes.     

Enhancement of the solubilities of polycyclic aromatic hydrocarbons by weak hydrogen bonds with water

Summary The thermodynamics of mobile order is applied to predict the aqueous solubility of liquid and solid aliphatic and polycyclic aromatic hydrocarbons. The solubility values are mainly determined by the magnitude of the hydrophobic effect. However, contrary to the solubilities of the alkanes, the solubilities of polycyclic aromatic hydrocarbons in water predicted in absence of solute-solvent hydrogen (H) bonds are systematically too low. This shows the contribution of weak specific interactions between the OH groups and the electrons of the aromatic substances. According to the theory, these interactions are characterized by a stability bility constant K_o which can be derived from solubility data. At 25°C, this constant amounts to 80 cm³/mol, the order of magnitude of which can be explained by the competition of these intermolecular bonds with the rather weak self-association bonds in the secondary chains of water.     

基于三维静电势参数研究C60溶解性的构效关系

在量子化学从头算基础上,对一系列溶剂化合物分子进行了结构优化和三维静电势参数计算,运用多元线性回归分析和神经网络方法对C60在121种不同溶剂的溶解性与计算的结构参数进行了构效关系研究.用建立起来的QSPR 关系式对15种不同结构类型溶剂进行了预测,并阐述了C60溶质与不同溶剂之间的相互作用,获得了满意的结果.     

Simultaneous determination of solubility, dissolution and dilution enthalpies of a substance from a single calorimetric experiment

The thermodynamics of dissolution in water of a set of substances has been studied calorimetrically. The examined substances were: potassium chloride, (glycyl-glycyl)diketopiperazine, (alanyl-alanyl)diketopiperazine, (leucyl-glycyl)diketopiperazine. They were chosen on the basis of their solubilities, going from a highly soluble electrolyte to the sparingly soluble diketopiperazines. It is shown that, using a commercially available calorimeter, it is possible to perform in a single calorimetric experiment the simultaneous determination of all thermodynamic parameters characterizing dissolution of a substance in a given solvent, i.e. solubility, dissolution enthalpy and dilution enthalpy. The solubility values in water obtained through the proposed method are in good agreement with those reported in the literature and obtained by other techniques.     

Solubility of 1-Butene in Water and in a Medium for Cultivation of a Bacterial Strain

Solubility measurements of 1-butene in water, from 20 to 50°C and at atmospheric pressure, were carried out using a Ben-Naim/Baer-type apparatus. The experimental results have a precision of about ±0.3%. Using accurate thermodynamic relations, the Ostwald coefficients at the experimental conditions and at infinite dilution, the mole fractions of the dissolved gas at the gas partial pressure of 101.325 kPa and the Henry coefficients at the water vapor pressure were calculated. The mole fraction of dissolved gas were fitted to the Clarke, Glew, and Weiss equation and thermodynamic quantities, standard molar Gibbs energy, entropy, and enthalpy changes, for the process of transferring the 1-butene molecules from the gaseous to the water phase, were computed. Moreover, solubility measurements of 1-butene in an aqueous medium for the cultivation of Xanthobacter Py2 in the same temperature range were also performed at atmospheric pressure. These solubility data are approximately 2.6% lower than those observed in pure water.     

Solubility of Solid 2-Methyl-1,3-butadiene (Isoprene) in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubility of solid 2-methyl-1,3-butadiene (isoprene) in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K has been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in the solute. The experimental value of the mole fraction solubility of solid isoprene in liquid argon at 87.3 K is (1.41 ± 0.27) × 10^–6 and (1.56 ± 0.36) × 10^–7 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for isoprene than is liquid nitrogen. The experimental values of the solubilities of isoprene in liquid argon and nitrogen were compared with results obtained for selected unsaturated and aromatic hydrocarbons.     

Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Selective and sensitive detection of organic contaminants in water samples by on-line trace enrichment–gas chromatography–mass spectrometry

Liquid chromatographic (LC) type trace enrichment is coupled online with capillary gas chromatography (GC) with mass spectrometric (MS) detection for the analysis of aqueous samples. A volume of 1–10 ml of an aqueous sample is preconcentrated on a trace-enrichment column packed with a polymeric stationary phase. After cleanup with HPLC-grade water the precolumn is dried with nitrogen and subsequently desorbed with ethyl acetate. A fraction of 60 μl is introduced on-line into a diphenyltetramethyldisilazane-deactivated retention gap under partially concurrent solvent evaporation conditions and using an early solvent vapor exit. The analytes are separated and detected by means of GC–MS. The potential of the LC–GC–MS system for monitoring organic pollutants in river and drinking water is studied. Target analysis is carried out with atrazine and simazine as model compounds; the detection limits achieved under full-scan and multiple ion detection conditions are 30 pg and 5 pg, respectively. Identification of unknown compounds (non-target analysis), is demonstrated using a river water sample spiked with 168 pollutants varying in polarity and volatility.     

Electrical Conductance and Volumetric Studies in Aqueous Solutions of DL-Pyroglutamic Acid

Conductivity measurements of DL-pyroglutamic acid and sodium pyroglutamate in dilute aqueous solutions were performed in the 288.15–323.15 K temperature range. The limiting molar conductances of pyroglutamate anion, λ^o(pGlu⁻, T) and the dissociation constants of pyroglutamic acid, K(T) were derived from the Onsager, and the Quint and Viallard conductivity equations. Densities of aqueous solutions with molalities lower than 0.5 mol-kg⁻¹ were determined at 5 K intervals from T = 288.15 K to 333.15 K. Densities served to evaluate the apparent molar volumes, V_2,φ(m, T), the cubic expansion coefficients, α (m,T) and the changes of the isobaric heat capacities with respect to pressure, (∂ C_P/∂ P)_T,m. They were correlated qualitatively with the changes in the structure of water when pyroglumatic acid is dissolved in it.     

Surface forces in wetting films

A short review of various components of surface forces acting in a non-symmetrical system such as wetting films is presented here. Experimental results are compared with modified DLVO theory, which includes, besides dispersion and electrostatic, structural (solvation) forces caused by a change in liquid structure in conditions of confined geometry. The peculiarities of disjoining pressure isotherms and conditions of the film stability of non-polar and polar simple liquids, as well as of aqueous solutions of electrolytes and surfactants, are systematically considered from a historical perspective.