Hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s: swelling behavior and water states

Hemocompatibility is an essential aspect of blood contacting polymers. Knowledge of the relationship between polymer structure and hemocompatibility is important in designing such polymers. In this work, the effect of swelling behavior and states of water on the hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) (PANCNVP) films was studied. Platelet adhesion and plasma recalcification time tests were used to evaluate the hemocompatibility of the films. Considering the importance of surface properties on the hemocompatibility of polymers, static water contact angles were measured by both sessile drop and captive bubble methods. It was found that, on the film surface of PANCNVP with a higher NVP content, adhered platelets were remarkably suppressed and the recalcification time was longer. The total water content adsorbed on the PANCNVP film was determined through swelling experiments performed at temperatures of interest. Differential scanning calorimetry and thermogravimetric analysis were used to probe the states of water in the films. Based on the results from these experiments, it was hypothesized that the better hemocompatibility of PANCNVP films with higher NVP contents was due to their higher free water content, because water molecule exchange at the polymer/liquid interface, facilitated by a high free water content, is unfavorable for the formation of surface bound water, which causes poor hemocompatibility. [diagram in text].     

冻干保护剂溶液低温退火特性的研究

利用差示扫描量热仪(DSC)研究了10%叔丁醇/10%蔗糖/水溶液的冻结特性, 退火温度及退火时间, 分析了溶液的退火行为. 实验结果表明, 溶液降温时, 蔗糖的存在阻碍了叔丁醇析出, 最大冻结浓缩溶液玻璃化转变温度Tg′由－32.5 ℃降低到－42.0 ℃, 升温时在－30 ℃叔丁醇发生反玻璃化. 在反玻璃化峰附近的温度进行退火可使叔丁醇充分析出, Tg′由－42.0 ℃上升到－34.9 ℃. 所需的退火时间与退火温度有关, 退火温度越接近Tg′, 所需的退火时间越长. 在－37 ℃时, 退火20 min可完全消除反玻璃化.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

The energies of dissociation of the N—O bonds in pyridine 1-oxide derivatives

The enthalpies of combustion of some pyridine derivatives in the solid state have been measured by precision bomb calorimetry, and their enthalpies of formation have been calculated. The enthalpies of sublimation of these compounds have been determined from the experimental temperature dependences of saturated vapor pressure using the Clausius-Clapeyron equation. The enthalpies of combustion, formation, and sublimation are the following (kJ mol^–1): -3360.9±2.1, -0.5±2.1, and 79.1±1.3, respectively, for 4-methylpyridine 1-oxide; -2551.0±1.7, 11.7±1.7, and 89.1±2.5, respectively, for 4-nitropyridine 1-oxide;-2355.6±1.3, 102.1±1.3, and 106.3±2.9 for 2,4,6-trinitropyridine 1-oxide; and -2287.6±1.3, 34.3±1.3, and 101.7±2.9 for 2,4,6-trinitropyridine. The enthalpies of formation in the solid state and the enthalpies of sublimation of pyridine derivatives obtained together with the literature data allowed the energies of dissociation of the donor-acceptor N—O bonds in pyridine 1-oxides to be calculated.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 660–662, April, 1995.     

新工科视阈下石油化工类高校应用化学专业课程体系重构

Taking a typical local and industry-orientated applied chemistry major as an example with focusing on the major changes in the form and content of the petrochemical industry, the way to reform the core curriculum system and teaching contents is presented. Based on the changing tendency of refinement of the petrochemical industry, a complete curriculum system with distinctive industry characteristics is set up according to the principles of the emerging engineering education (3E) with several reasonable suggestions. A new model for the construction of a 3E major in chemistry-related majors is suggested. It is a good reference for the construction of curriculum systems for other local and industry-orientated colleges who want to make 3E reform.     

Poly(ethylene oxide) blends with crosslinking polyester resin

The miscibility of polyethylene oxide (PEO) with oligoester and polyester resin, the morphology of the blends and the kinetics of PEO crystallization in the blends were studied by optical microscopy and differential scanning calorimetry. The blends were found to be miscible with uncured resin at 60°C. After isothermal crystallization of PEO from liquid oligoester or UV cured polyester about 20% of the PEO material is still dissolved in the resin and it is incorporated between lamellae or in the interspherulitic regions. It was observed that the growth rate of PEO spherulites and the degree of crystallinity of PEO in the blends decreases very fast together with a decrease of the PEO content and the progress of the resin crosslinking.     

端羟基芳香酯二醇扩链的聚氨酯－酯的DSC研究

端羟基芳香酯二醇扩链的聚氨酯－酯的ＤＳＣ研究陈静，余学海，杨昌正（南京化工学院应化系南京２１０００９）（南京大学化学系南京２１００９３）关键词嵌段聚醚聚氨酯－酯，结晶性，微观相结构，差示扫描量热法，形态结构众所周知，聚氨酯嵌段共聚物是一类结构特殊、用...     

Photoinitiators with functional groups. V. New water‐soluble photoinitiators containing carbohydrate residues and copolymerizable derivatives thereof

The synthesis of new water‐soluble photoinitiators (PIs) based on hydroxyalkylphenones, benzophenones, and thioxanthones with carbohydrate residues such as glucose, cellobiose, and 1‐amino‐1‐deoxy‐D ‐glucitol (glucamine) is described. In addition, selected initiators were reacted with methacryloyl chloride to obtain copolymerizable initiators with improved migration stability. Results from photo differential scanning calorimetry and gel‐content measurements in commercially available water‐thinnable and emulsion‐type resins as well as 2‐hydroxyethyl acrylate are included. Glucose‐modified PIs gave the best results with respect to compatibility with the resin, reactivity, and gel content. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1504–1518, 2002     

Thermodynamic Study of the Three Isomers of Bromobenzoic Acid

The enthalpies of sublimation and fusion and triple-point temperatures of 2-bromo-. 3-bro-mo- and 4-bromobenzoic acids have been determined precisely by sublimation calorimetry, drop calorimetry and differential thermal analysis. The measurements of sublimation enthalpy of the three acids were made at 333, 348 and 363 K, respectively, using a Tian-Calvet microcalorimeter equipped with Knudsen effusion cells. The derived standard molar enthalpies of sublimation at 298.15 K are (95. 94±0. 41), (99. 20± 0.18), and (103. 08±0. 59) kJ · mol-1for the 2-bromo-, 3-bromo- and 4-bromobenzoic acids, respectively. In addition, the saturated vapour pressure of these compounds was also calculated on the basis of the sublimation experiments. The enthalpy of fusion, the triple-point temperatures and the mole fraction purities of the samples of the investigated substances were measured using the mean temperature version DTA apparatus developed by the CTM of the CNRS in Marseille. The triple-point temperature and the     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.