Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

Standard enthalpy of formation of 3,4,5-trimethoxybenzoic acid

The energy of combustion of crystalline 3,4,5-trimethoxybenzoic acid in oxygen at T=298.15 K was determined to be -4795.9±1.3 kJ mol^-1 using combustion calorimetry. The derived standard molar enthalpies of formation of 3,4,5-trimethoxybenzoic acid in crystalline and gaseous states at T=298.15 K, Δ_fH_m ^Θ (cr) and Δ_fH_m ^Θ (g), were -852.9±1.9 and -721.7±2.0 kJ mol^-1, respectively. The reliability of the results obtained was commented upon and compared with literature values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cross-linking epoxide resins with hydrolysates of chrome-tanned leather waste

Differential scanning calorimetry was employed to investigate the reaction of diglycidyl ethers of bisphenol A (DGEBA) of mean molecular mass 348–480 Da, with collagen hydrolysate of chrome-tanned leather waste in a solvent-free environment. The reaction leads to biodegradable polymers that might facilitate recycling of plastic parts in products of the automotive and/or aeronautics industry provided with protective films on this basis. The reaction proceeds in a temperature interval of 205–220°C, at temperatures approx. 30–40°C below temperature of thermal degradation of collagen hydrolysate. The found value of reaction enthalpy, 519.19 J g⁻¹ (= 101.24 kJ mol⁻¹ of epoxide groups) corresponds with currently found enthalpy values of the reaction of oxirane ring with amino groups. Reaction heat depends on the composition of reaction mixture (or on mass fraction of diglycidyl ethers in the reaction mixture); proving the dependence of kinetic parameters of the reaction (Arrhenius pre-exponential factor A (min⁻¹) and activation energy E _a (kJ mol⁻¹)) did not succeed. Obtained values of kinetic parameters are on a level corresponding to the assumption that reaction kinetics is determined by diffusion.     

Some thermodynamic aspects of nitrides in materials science

The energies of combustion in fluorine of gallium nitride and indium nitride in wurzite crystalline structure have been measured in a two-compartment calorimetric bomb, and new standard molar enthalpies of formation have been calculated: Δ_fH_m⁰(GaN(cr) 298.15 K)= –(163.7±4.2) kJ mol^–1 and Δ_fH_m⁰(InN(cr) 298.15 K)= –(146.5±4.6) kJ mol^–1 . Comparison with the recommended values of the Δ_fH_m⁰ nitrides from the literature is also presented.     

Chemical studies on the anobiidae: Sex pheromone of the drugstore beetle, stegobium paniceum (L.) (coleoptera)

Chemical an spectroscopic evidence is presented to show that 2,3-dihydro-2,3,5-trimethyl-6-(1-methyl-2-oxobutyl)-4H-pyran-4-one (10) is the sex pheromone produced by the female drugstore beetle, Stegobium paniceum L.     

Thermal analysis study of the effect of molecular weight on constrained amorphous phase in poly(phenylene sulfide)

We report a thermal analysis study of the effect of molecular weight on the amorphous phase structure of poly(phenylene sulfide), PPS, crystallized at temperatures just above the glass transition temperature. Thermal properties of Fortron PPS, having viscosity average molecular weights of 30000 to 91000, were characterized using temperature modulated differential scanning calorimetry (MDSC). We find that while crystallinity varies little with molecular weight, the heat capacity increment at the glass transition decreases as molecular weight decreases. This leads to a smaller liquid-like amorphous phase, and a larger rigid amorphous fraction, in the lower molecular weight PPS. For all molecular weights, constrained fraction decreases as the scan rate decreases.This research is supported by the U. S. Army Research Office through contract DAAH04-96-1-0009. The authors thank Hoechst Celanese for providing different molecular weight Fortron samples and Dr. George Collins for providing sample information. The authors acknowledge the assistance of Elizabeth Oyebode and Leonardo Grimaldi with sample preparation and MDSC work.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Multiple glass transitions and local composition effects on polymer solvent mixtures

Recent differential scanning calorimetry (DSC) results on polystyrene–solvent mixtures show two distinct glass transitions whose positions and widths vary with composition. Parallel work on the dynamic response in polymer blends has focused on how segmental mobilities are controlled by local composition variations within a “cooperative volume” containing the segment. Such variations arise from both chain connectivity and composition fluctuations. We account for both using a lattice model for polymer–solvent mixtures that yields the composition distribution around polymer and solvent segments. Insights from our lattice model lead us to simplified calculations of the mean and variance of local composition, both in good agreement with lattice results. Applying our model to compute DSC traces leads to an estimate of the cooperative volume, since a larger cooperative volume both reduces the biasing effect of connectivity, and narrows the composition distribution. Comparing our results to data, we are able to account for the composition-dependent broadening with a cooperative length scale of about 2.5 nm. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3528–3545, 2006     

Solute-solvent interactions in water-tert-butyl alcohol mixtures. VI. Enthalpies of solution for halo-para-substituted benzoates

Enthalpies of solution of sodium benzoate, potassium benzoate, and potassium halo-substituted benzoates are reported at 298.15°K in water and in nine water-tert-butyl alchol mixtures. Transfer enthalpies from water to the mixed solvent go through a maximum for about 0.055 mole fraction of alcohol. Additivity of ionic contributions in the enthalpies of transfer is verified. Substituent effects on the transfer enthalpies of benzoates are discussed in terms of size of the solutes and cohesion of the solvent mixtures. For Part V, see ref. 1.     

Temperature-controlled combustion and kinetics of different rank coal samples

Differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG) has been used to obtain information on the temperature-controlled combustion characteristics of seventeen coals of different origin from Thrace basin of Turkey. Experiments were performed in air atmosphere up to 600°C at a heating rate of 10°C min^-1. The DSC/TG curves clearly demonstrate distinct transitional stages in the entire coal samples studied. Reaction intervals, peak and burn-out temperatures of the coal samples are also determined. Two different kinetic methods known as, Arrhenius and Coats-Redfern, were used to analyze the kinetic data and the results are discussed.