Mg-Nd-Zr-Zn合金的制备及钕对合金组织性能的影响

在RJ-2溶剂和Be的联合保护下制备了Mg-Nd-Zr-Zn系合金. 通过对合金组织的分析, 以及Nd对组织性能影响的研究, 试制出了Nd添加量合理的Mg-Nd-Zr-Zn合金. 经过测试, 认为Nd添加量的增加提高了合金的250 ℃高温抗拉强度, 当Nd添加量超过2.8%时, 合金的高温强化作用不十分显著. Mg-Nd-Zr-Zn合金在250 ℃时的拉伸断裂方式主要是韧性断裂.     

镧对含锡、锑残余元素的34CrNi3Mo钢热塑性的改善作用

采用Gleeble-1500热模拟机测定了不同含量的残余元素锡、锑及稀土镧对低氧、低硫的34CrNi3Mo钢热塑性的影响;采用SEM及EDS手段研究了稀土镧对不同锡、锑含量的钢断裂方式的影响及在其中形成夹杂物的情况。结果表明,用稀土金属可以改善低氧、低硫钢中残余元素对钢性能的危害;镧可以和钢中较低含量的锑作用生成镧锑金属间化合物,并且发现了少量的镧锡金属间化合物。     

Synthesis of novel mesoporous silica spheres with starburst pore canal structure

Novel spherical mesoporous silica materials with uniform diameters and starburst mesopore structures were synthesized by a simple one-step procedure with ethanol as the co-solvent in dilute aqueous solution and their formation mechanism was proposed. The arrangement of the pore canal and the diameter of the sphere could be tailored by altering the concentration of ethanol.     

Synthesis, X-ray crystal structures, and gas sorption properties of pillared square grid nets based on paddle-wheel motifs: implications for hydrogen storage in porous materials

A systematic modulation of organic ligands connecting dinuclear paddle-wheel motifs leads to a series of isomorphous metal-organic porous materials that have a three-dimensional connectivity and interconnected pores. Aromatic dicarboxylates such as 1,4-benzenedicarboxylate (1,4-bdc), tetramethylterephthalate (tmbdc), 1,4-naphthalenedicarboxylate (1,4-ndc), tetrafluoroterephthalate (tfbdc), or 2,6-naphthalenedicarboxylate (2,6-ndc) are linear linkers that form two-dimensional layers, and diamine ligands, 4-diazabicyclo[2.2.2]octane (dabco) or 4,4'-dipyridyl (bpy), coordinate at both sides of Zn(2) paddle-wheel units to bridge the layers vertically. The resulting open frameworks [Zn(2)(1,4-bdc)(2)(dabco)] (1), [Zn(2)(1,4-bdc)(tmbdc)(dabco)] (2), [Zn(2)(tmbdc)(2)(dabco)] (3), [Zn(2)(1,4-ndc)(2)(dabco)] (4), [Zn(2)(tfbdc)(2)(dabco)] (5), and [Zn(2)(tmbdc)(2)(bpy)] (8) possess varying size of pores and free apertures originating from the side groups of the 1,4-bdc derivatives. [Zn(2)(1,4-bdc)(2)(bpy)] (6) and [Zn(2)(2,6-ndc)(2)(bpy)] (7) have two- and threefold interpenetrating structures, respectively. The non-interpenetrating frameworks (1-5 and 8) possess surface areas in the range of 1450-2090 m(2)g(-1) and hydrogen sorption capacities of 1.7-2.1 wt % at 78 K and 1 atm. A detailed analysis of the sorption data in conjunction with structural similarities and differences concludes that porous materials with straight channels and large openings do not perform better than those with wavy channels and small openings in terms of hydrogen storage through physisorption.     

贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

无机层状复合氢氧化物中顺铂-DNA模型分子的选择性插入

药物分子的选择性包裹和控制释放是药物研究领域中具有挑战性的研究方向。本文研究表明:顺铂-DNA模型分子cis-[Pt(NH₃)₂(5′-GMP)₂](5′-GMP 5′-单磷酸鸟苷)可插入无机层状复合氢氧化物[Zn_0.68Al_0.32(OH)₂](NO₃)_0.32·mH₂O。但另一种层状复合氢氧化物[LiAl₂(OH)₆]Cl·H₂O由于其阳离子层中正电荷密度较高、阳离子层与层间阴离子之间静电作用较强,因而顺铂-DNA模型分子不能通过离子交换方式插入其层间。光谱数据证实插入层间的顺铂-DNA模型分子结构不变。这可能为铂-DNA分子的传递提供新的方法。     

聚氯乙烯接枝丙烯酸稀土的研究

将无机稀土有机化后与聚氯乙烯(PVC)进行接枝共聚。探讨了氧化稀土与丙烯酸反应、PVC接枝丙烯酸稀土的原理和方法，并通过红外光谱、扫描电镜对接枝共聚物进行定性表征，用微量热天平对接枝共聚物的热性能进行测定。实验结果表明，经丙烯酸稀土接枝共聚后的PVC，其耐热分解性能和韧性有了明显的提高。     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Characterisation of raw materials for production of ceramics

The aim of this paper is to characterize some raw materials used for ceramics material production. Five samples of clay have been analyzed. It has been carried out a patterned sampling in a quarry in Rosarno (South Italy). Chemical-physical properties on clay samples are determined. Test pieces have been prepared and physical properties after firing are determined by DSC thermal analysis, XRD analysis and X-ray fluorescence. It is important to note the high amount of Fe₂O₃. The mixture principally contains quartz, illite and oligoclase. It has been observed the colour and the shape after firing: predominant colour is red. In this case the clay has been used in mixtures covered with glazes. The colour of internal clay is hidden by opaque of glazes. The analysed raw materials can be used in a slip for single fired red tiles. The A2sp clay produces best ceramics at 1000°C.