聚醚酰亚胺耐热大分子偶联剂增强增韧石英纤维/含硅芳炔复合材料

设计并制备了一种新型乙炔基封端聚醚酰亚胺大分子偶联剂(BDA-K),探究了其对石英纤维(QF)/含硅芳炔(PSA)复合材料界面增强增韧的效果.在常温下,加入大分子偶联剂的复合材料层间剪切强度、弯曲强度和缺口冲击强度分别提高了54.1%,59.0%和23.8%;在250℃时,层间剪切强度和弯曲强度保留率分别达到89.0%和89.6%,500℃时保留率分别达到63.3%和67.9%.傅里叶变换红外光谱和X光电子能谱分析结果表明,BDA-K参与PSA的交联固化,与QF发生有效化学键合;热重分析(TGA)结果表明,由于BDA-K的分子结构中引入耐热官能团酰亚胺环等,使其大分子偶联剂的T_(d5)达到489℃;扫描电子显微镜(SEM)结果表明,柔软的大分子层提供了适中的界面结合,使强度和韧性都得到提高.     

配合物的配位基团性质对CoMo/γ-Al_2O_3催化剂加氢脱硫性能的影响

选择四种不同配位基团的双齿配位分子乙二胺(EN)、乙醇胺(EA)、乙二醇(EG)和丙二酸(MA)对CoMo/γ-Al_2O_3催化剂改性,比较了它们对二苯并噻吩HDS性能的影响。结果表明,其活性顺序为CoMo(EN)CoMo(EA)CoMo(EG)≈CoMo(MA)CoMo,反应以直接脱硫路径为主,随反应温度升高,加氢路径的占比增加,加入配合物后可以促进加氢路径脱硫,CoMo(EN)催化剂具有最高的加氢活性。采用UV-vis、EA、XPS和HRTEM等手段对催化剂进行表征,结果表明,-NH_2与Co~(2+)有强络合作用,-COOH主要是静电作用,而-OH与钴离子没有相互作用。配位基团和Co~(2+)的相互作用,与HDS活性直接相关。配合物与Co~(2+)的结合可以有效生成Co-Mo-S活性相,且配合物碳化减弱载体与活性相的相互作用,有利于生成有更高本征活性的II型活性相。     

Potential use of NR and wood/NR composites as thermal neutron shielding materials

This work investigated thermal neutron shielding, cure characteristics and mechanical properties of natural rubber (NR) and wood/NR composites with addition of either boron oxide (B₂O₃) or boric acid (H₃BO₃) for potential use as flexible shielding materials. The results showed that increase in the B₂O₃ or H₃BO₃ content from 0 to 80 phr and 0–50 phr in 10-phr increments, respectively, could improve thermal neutron shielding properties but reduced overall tensile properties, while the addition of 20-phr wood particles in wood/NR composites improved surface hardness and dimensional stability. Furthermore, the values of the Half Value Layer (HVL), which represent the required thickness of material to attenuate half of the incoming neutrons, were evaluated at a content of 80-phr B₂O₃ by varying thickness of both NR and wood/NR composites from 2.5 mm to 20.0 mm in 2.5-mm increments. The results indicated that the HVL values were approximately the same at 3.5 mm. Hence, the overall properties investigated in this work suggested great potential of these composites to be used as effective thermal neutron shielding materials.     

Micromechanical assessment of PMMA microcapsules containing epoxy and mercaptan as self-healing agents

Mechanical properties of microcapsule shell have great influence on microcapsule suitability as a mechanical trigger in a self-healing composite. The elastic modulus and hardness of polymethyl methacrylate (PMMA) microcapsules containing epoxy prepolymer (EC 157) and pentaerythritol tetrakis (3-mercaptopropionate) (PETMP) as healing agents were investigated using nanoindentation technique. The influence of the PMMA average molecular weight (M_W), the kind of core material, and the mechanical mixing rate on the mechanical properties of the microcapsule shell were studied using the Taguchi experimental design approach. The results indicated that the most important factors which affect the elastic modulus and the hardness of microcapsules shell are the Mw of PMMA and the kind of core material. The average elastic modulus of PMMA shell of epoxy and mercaptan-loaded microcapsules was found between 2.386 and 3.495 GPa. The hardness of PMMA shell of healing agent microcapsules was obtained in the range of 0.064–0.219 GPa. This constitutes essential knowledge in order to design capsules with tailored properties for self-healing materials.     

Heterofunctional RAFT‐derived PNIPAM via cascade trithiocarbonate removal and thiol‐yne coupling click reaction

An efficient one‐pot process to functionalize the α‐ and ω‐positions of RAFT‐derived poly(N‐isopropylacrylamide) (PNIPAM) by two inherently different mechanistic pathways is reported. The method relies on the RAFT polymerization of NIPAM using a new alkyne‐based RAFT agent, namely 2‐cyano‐5‐oxo‐5‐(prop‐2‐yn‐1‐ylamino)pentan‐2‐yl dodecyltrithiocarbonate (COPYDC) and the combination of thiol‐yne click chemistry and thiocarbonylthio chain‐end removal reactions. COPYDC was prepared in good yield and used as an efficient chain transfer agent during the RAFT polymerization of NIPAM. Well‐defined polymers with controlled molar masses ( = 7500–14,700 g.mol^?1) and narrow dispersities (? = 1.18–1.26) are thus obtained. Cascade thiol‐yne click reaction at the alkyne α‐chain end and trithiocarbonate removal at the ω‐chain end are successfully achieved using benzyl mercaptan and excess AIBN. The reported method provides a facile and mild route to heterofunctional telechelic RAFT polymers with predictable molar masses and low dispersities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3597–3606     

第二结构导向剂诱导形成的二维有机模板稀土硫酸盐

水热条件下合成了具有超大孔道和层状结构的有机模板稀土硫酸盐。超大孔道的稀土硫酸盐（1）的分子式为[（CH₃）₂NH₂]₉[Pr₅（SO₄）₁₂]·2H₂O,它展现出有趣的交叉二十元环孔道结构。层状的稀土硫酸盐的分子式为[H₃O]₃[（CH₃）₂NH₂]₃[Ln₂（SO₄）₆]（Ln=Pr,2;Nd,3）,它可以被看作是由双链和八元环结合而成。这3种化合物的合成揭示了大的有机胺（三聚氰胺）可能用作为第二结构导向剂,阻止形成高维数的无机骨架,从而诱导了二维层状结构稀土硫酸盐晶体的生长。对化合物1和3的磁性进行了研究,测试的温度范围在2~300 K。     

环氧氯丙烷修饰的对位和间位芳纶涂覆剂研究

制备了具有环氧丙基侧链的对位芳纶(PPTA-ECH)和间位芳纶(PMIA-ECH),并将其用做对位芳纶(PPTA)织物/环氧树脂复合材料中PPTA织物的涂覆剂。采用场发射扫描电子显微镜(FE-SEM)及XPS等方法对PPTA织物表面的PPTA-ECH涂层结构进行了表征。考察了PPTA-ECH和PMIA-ECH涂覆的PPTA织物/环氧树脂复合材料的层间剪切强度和面内剪切强度,并与未经涂覆的PPTA织物复合材料的性能作比较。结果表明,PPTA-ECH和PMIA-ECH可显著改善PPTA织物和环氧树脂之间的界面性能。涂覆了PPTA-ECH及PMIA-ECH的PPTA织物/环氧树脂复合材料的层间剪切强度(ILSS)比未经涂覆的复合材料分别提高了26.20%和14.76%,面内剪切强度(ISS)分别提高了26.98%和11.86%。由于PPTA-ECH对PPTA纤维具有更强的亲和能力,因此PPTA-ECH在层间剪切强度和面内剪切强度方面的增强效果均优于PMIA-ECH。对PPTA-ECH在PPTA纤维表面铺展与吸附及对复合材料的增强机理也进行了初步探讨。作为新型涂覆剂,PPTA-ECH在对位芳纶复合材料的开发应用方面具有潜在的应用前景。     

Seed‐Assisted Synthesis of MWW‐Type Zeolite with Organic Structure‐Directing Agent‐Free Na‐Aluminosilicate Gel System

The seed‐assisted synthesis of zeolites without using organic structure‐directing agents (OSDAs) has enabled alternative routes to the simple, environmentally friendly and low‐cost production of industrially important zeolites. In this study, the successful seed‐assisted synthesis of MCM‐22 (MWW‐type) zeolite with an OSDA‐free gel is reported for the first time. MWW‐type zeolites are obtained by the addition of as‐synthesized MCM‐22 seeds prepared with hexamethyleneimine (HMI) into OSDA‐free Na‐aluminosilicate gels. Based on the results of XRD, ICP‐AES, NMR, N₂ physisorption and NH₃‐TPD, the product exhibited different features compared to those of the seeds. The H‐form product can serve as a catalyst in Friedel–Crafts alkylation reaction of anisole with 1‐phenylethanol, and its catalytic activity is comparable to the seeds. Furthermore, XRD, FE‐SEM, TG‐DTA, CHN, FT‐IR and NMR analyses of products and intermediates provide insights into the role of seeds and occluded HMI, the crystallization process, and key factors for achieving seed‐assisted synthesis of MWW‐type zeolites with an OSDA‐free gel system. The present results provide a new perspective for the economical and environmentally friendly production of MWW‐type zeolites.     

Synthesis of Hydrazones from Amino Acids and their Antimicrobial and Cytotoxic Activities

Hydrazones 6a–6n were synthesized from different amino acids with various aldehydes under reflux in methanol/ethanol. The structures of synthesized compounds were ascertained by elemental analysis and spectroscopic techniques. A comparative study of the antimicrobial activity and cytotoxicity was carried out of the N‐protected amino acids, their esters, hydrazides, and the respective hydrazones, providing good results in cytotoxicity studies.     

O‐Glycosylation/Alkylation and Antimicrobial Activity of 4,6‐Diaryl‐2‐Oxonicotinonitrile Derivatives

A series of glycosylation and alkylation reactions of 6‐phenanthernyl‐2‐pyridone derivatives 1a , 1b containing electron withdrawing and electron donating substituents at 4‐position is reported. Regioselective 2‐O‐ alkylated/glycosylated products were obtained exclusively, irrespective of the electronic nature of alkylating or the glycosyling agent. Glycosylation of 1a , 1b with glucosyl/galactosyl and lactosyl bromides afforded 2a , 2b ; 4a , 4b ; and 6a , respectively. Alkylation of 1a , 1b with epichlorohydrin, propargyl, allyl bromides, and 3‐chloropropanol resulted in compounds 8 , 9 , 10 and 13 , respectively. Deprotection of O‐glycosylated products under conventional conditions provided the free glycosides 3a , 3b ; 5a , 5b ; 7a , 12 ; and 13 , respectively. The minimal inhibitory concentration for some of the newly synthesized compounds showed high significant activity against Gram (+ve) and Gram (−ve) and antifungal activities. Among the screened compounds, the 4‐trifluromethyl phenyl derivatives 2a , 3a , 4a , 8a , and 11a exhibited strong antimicrobial activity.