含钼化合物及其配合物的抗癌抗肿瘤活性

钼是生命体所必需的微量元素。本文介绍了钼在人体中的作用，钼缺乏和钼过量对人体的影响，并介绍了含钼化合物以及配合物的抗癌抗肿瘤研究情况。     

乙醛酸化学镀铜的电化学研究

以乙醛酸作还原剂,Na2EDTA.2H2O为络合剂,亚铁氰化钾和2,2'-联吡啶为添加剂组成化学镀铜液体系,应用线性扫描伏安法研究分析了络合剂、添加剂对该镀铜体系电化学性能的影响.结果表明,络合剂Na2EDTA对乙醛酸的氧化和铜的还原有阻碍作用.亚铁氰化钾和过量(20 mg/L)的2,2'-联吡啶对乙醛酸的氧化起较明显的抑制作用.     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

Synthesis of Poly(styrene-co-divinylbenzene) supported Dichloro Cyanuric Acid

ＳｙｎｔｈｅｓｉｓｏｆＰｏｌｙ（ｓｔｙｒｅｎｅ┐ｃｏ┐ｄｉｖｉｎｙｌｂｅｎｚｅｎｅ）┐ｓｕｐｐｏｒｔｅｄＤｉｃｈｌｏｒｏＣｙａｎｕｒｉｃＡｃｉｄＺＨＯＮＧＪｉｎｇ－ｆａｎｇ＊,ＬＩＣｈｅｎ－ｘｉ,ＨＥＢｉｎｇ－ｌｉｎａｎｄＷＵＺｈｉ－ｚｈｏｎｇ（Ｓｔ...     

致孔剂对HP（MA—VAc—MMA）载体孔结构的影响

以二乙烯苯和双丙烯酸多缩乙二醇酯为交联剂、聚醋酸乙烯酯（ＰＶＡｃ）或它与醋酸丁酯（ＢＡＣ）的混合物为致孔剂、ＢＰＯ为引发剂，用悬浮聚合随后水解的方法制得了部分水解聚（丙烯酸甲酯－醋酸乙烯酯－甲基丙烯酸甲酯）［ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）］多孔载体，研究了ＰＶＡｃ及（ＰＶＡｃ＋ＢＡＣ）用量、分子量及混合比对ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）孔结构的影响。结果表明，当ＰＶＡｃ的Ｍ＞２．５×１０５，ＰＶＡｃ／ＢＡＣ为２．３，用量为１０～２０％时，可制得孔隙率较高，孔径分布较窄，孔表面积较大的多孔载体。这种载体适用于微生物固定化。     

Zum chemischen Transport von Molybdän mit SbBr3 – Experimente und Modellrechnungen

On the Chemical Transport of Molybdenum using SbBr₃ – Experiments and Thermochemical Calculations Mo migrates in a temperature gradient from the region of higher temperature to the lower temperature using SbBr₃ as transport agent. For various mean transport temperatures (750 ? T ? 1000°C; T = 0,5 (T₁ + T₂); T₂ ? T₁ = 100°C) we observed small transport rates (? ? 0,6 mg/h) which rise up to 16 mg/h for higher transport agent concentrations. Small amounts of MoO₂ and Sb were detected beside Mo in the sink. The observed solid phases in the sink are in agreement with thermodynamical calculations by CVTrans which also demonstrate that the formation of MoO₂ and Sb as well as the transport effect of SbBr₃ are caused by traces of H₂O from the quartz glass wall. The sequence of deposition of Mo, MoO₂ and Sb in the examined temperature range can be calculated (CVTrans) and measured with the transport balance.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

升华剂2,4,6-三异丙基-1,3,5-三氧六环的晶体结构及其热力性质研究

以升华剂2,4,6-三异丙基-1,3,5-三氧六环为溶质,无水乙醇为溶剂,采用溶液挥发法培养了2,4,6-三异丙基-1,3,5-三氧六环的单晶.利用X-射线单晶衍射法测定其单晶结构,并通过紫外光谱、热重和X-射线粉末衍射等手段对其进行了表征.结果表明,标题化合物属于正交晶系,Pnma空间群,晶胞参数:a=0.827 7(3)nm,b=1.024 4(3)nm,c=1.683 1(5)nm,α=β=γ=90°,V=1.427 1(8)nm~3,Z=42,Mr=216.81,Dc=1.007g/cm~3,μ=0.070mm~(-1),F(000)=480.0,T=293(2)K,最终偏差因子(对I2σ(I)的衍射点)R1=0.083 7,wR2=0.264 8.化合物分子中的六元环呈椅式构型,分子间存在的弱氢键作用使得其沿c轴方向形成了一维无限链状结构.通过测量其饱和蒸气压随温度变化,按Clausius-ClaPeyron方程计算得出其升华焓为15.82kJ/mol,再结合热重TGA-DTA曲线、DSC曲线和焓变分析,可以判定升华剂在80℃之前没有发生分解产生新的物质.     

模板法制备无机纳米材料的研究进展

模板法在无机纳米材料的制备过程中能够有效地控制形貌、粒径和结构,已成为合成无机纳米材料的前沿方法。综述了模板法制备无机纳米材料的研究进展,主要介绍了硬模板剂(多孔阳极氧化铝、介孔碳)和软模板剂(高分子聚合物、生物高分子)的制备及其应用,结合模板法的作用机制,重点论述了不同种类的模板剂在无机纳米材料制备过程中对于形貌的影响。并对模板法制备无机纳米材料的前景和现存问题进行了总结。参考文献35篇。     

弱凝胶钻井液成胶剂AM/AMPS/OA_8的合成与表征

针对水平井、大斜度井钻井过程中井眼润滑性、岩屑携带以及钻井速度的影响等问题,通过合理的分子设计,以丙烯酰胺(AM)、2-丙烯酰胺-2-甲基丙磺酸(AMPS)和实验室自制疏水单体丙烯酸正辛醇OA_8为原料,利用胶束聚合法,制备了一种弱凝胶成胶剂AMAMPSOA_8,其结构经1H NMR和IR表征。以AMAMPSOA_8在低剪切速率下的表观粘度为指标设计正交试验,确定最优反应条件为:AM与AMPS摩尔配比为4.8∶1,引发剂用量为单体总质量的0.04%,疏水单体浓度为0.75%,于70℃反应9 h。该条件下,0.5%AMAMPS0A_8聚合物溶液在低剪切速率3 r·min~(-1)下表观粘度可达23 680 mPa·s。利用热分析仪、高温滚子炉、高温高压流变仪对产物性能进行了研究。研究表明:AMAMPSOA_8的抗温性能可达160℃;聚合物溶液体系有明显的触变性,在40 min后溶液切力增加幅度变缓。