苯丙烯类葡萄糖氧苷的合成及其抗缺氧活性

以取代苯甲醛(1a~1t)为原料,通过Knoevenagel缩合、酯化和LiAlH₄还原等反应制得苯丙烯醇衍生物(3a~3t);以取代肉桂醛(1u~1x)为原料,经NaBH₄还原制得苯丙烯醇衍生物(3u~3x); 3a~3x与全乙酰化溴代葡萄糖经Koenigs-Knorr偶联反应及MeONa/MeOH体系脱除乙酰保护基反应,合成了24个苯丙烯类葡萄糖氧苷(5a~5x),其中5c,5f ~ 5x为新化合物,其结构经¹H NMR和ESI-MS表征。采用MTT法测定了5对缺氧损伤的内皮细胞(EA.hy926)的抗缺氧活性。实验结果表明： 5b, 5e, 5g, 5p, 5q, 5s, 5t和5y对EA.hy926的抗缺氧活性均高于经景天苷。     

高分散Fe-N-C氧还原反应电催化剂及其在直接甲醇燃料电池中的应用

氧还原反应(ORR)是燃料电池和金属空气电池等洁净发电装置中阴极的主要反应,该反应动力学过程慢,电化学极化严重. Pt基电催化剂具有较好的ORR活性,然而Pt资源有限、价格昂贵,研制高活性、低成本的代Pt电催化剂意义重大.经过几十年的探索,研究者发现将含有C, N和Fe等元素的前体进行高温热处理得到的Fe-N-C电催化剂对ORR具有良好的活性,然而在高温热解过程中Fe容易发生聚集而形成大块颗粒,导致Fe的利用率不高,影响了电催化剂的ORR活性.
　　本文分别以聚吡咯和乙二胺四乙酸二钠(EDTA-2Na)为C和N的前驱体,利用高温热解形成的富含微孔的碳材料对铁前体的吸附及锚定作用,获得了一种Fe高度分散的Fe-N-C电催化剂.采用物理吸脱附技术、高分辨透射电镜(HRTEM)和扫描电镜对Fe-N-C及其制备过程中相关电催化剂的孔结构及表面形貌进行了表征.结果表明,在第一步热解过程中, EDTA-2Na的Na对碳材料起到了活化作用,形成富含微孔的N掺杂碳材料(N-C-1),其BET比表面积达到1227 m2/g,孔径约1.1 nm.在第二步热解过程中, N-C-1有效地抑制了Fe的聚集,产物Fe-N-C中的Fe元素均匀地分布在碳材料中,其比表面积高达1501 m2/g.
　　电化学测试结果表明,在碱性介质(0.1 mol/L NaOH)中, Fe-N-C电催化剂对ORR具有良好的催化活性, ORR起始电位(Eo)为1.08 V (vs. RHE),半波电位(E1/2)0.88 V,电子转移数n接近4, H2O2产率<3%,与商品20%Pt/C(Johnson Matthey)接近.电化学加速老化测试结果表明, Fe-N-C的E1/2未发生明显变化,而Pt的负移45 mV,表明Fe-N-C具有很好的稳定性;在酸性介质(0.1 mol/L HClO4)中, Fe-N-C的Eo为0.85 V, E1/2为0.75 V,其E1/2比Pt/C负移约0.15 V,表明在酸性介质中Fe-N-C对ORR的催化活性还有待提高.采用TEM、X射线衍射、X射线光电子能谱以及穆斯堡尔谱等方法研究了电催化剂构效关系.结果表明, Fe-N-C较好的ORR活性主要来自于高分散的Fe-N4结构,此外, N(吡啶N和石墨N)掺杂的C也对反应具有一定的催化活性.
　　与Pt/C相比, Fe-N-C电催化剂具有很好的耐甲醇性能.本文对比了Fe-N-C和Pt/C作为阴极催化剂的直接醇类燃料电池(DMFC)性能,采用质子交换膜的DMFC最大功率密度分别为47(Fe-N-C)和79 mW/cm2(Pt/C),而采用碱性电解质膜的则分别为33(Fe-N-C)和8 mW/cm2(Pt/C).结合半电池结果表明, Fe-N-C电催化剂在碱性介质中具有比Pt更为优秀的催化活性和稳定性,有望用作DMFC阴极代Pt催化剂.     

One-step synthesis of porous PtNiCu trimetallic nanoalloy with enhanced electrocatalytic performance toward methanol oxidation

Pt-based alloy nanoporous structures have attracted a lot of attention because of their high activity and stability toward alcohol oxidation reactions. Especially, Pt alloying with Earth-abundant metal can lower the cost of catalyst. Here, we introduce a one-pot approach to synthesize bimetallic PtCu and Ni-doped PtCu nanoalloy with porous structure. The as-synthesized Ni-doped Pt₆₀Ni₃Cu₃₇ nanoalloys exhibit excellent electrocatalytic properties toward methanol oxidation in acidic medium. The mass activity of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys is 3.6 times and 5.3 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black for methanol oxidation in 0.2?M methanol solution. Besides, the stability of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys was much better than Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. After 3600?s chronoamperometry test, the remaining values of the Pt₆₀Ni₃Cu₃₇ nanoalloys are 3.7 times and 11.0 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. And it is the first time to report that small amount of Ni dopants can boost the activity and stability of PtNiCu alloys toward methanol oxidation.     

钙钛矿材料组分调控策略及其光电器件性能研究进展

近年来，钙钛矿太阳电池的光电转换效率取得了爆发式增长，这与电池中钙钛矿薄膜的制备工艺和材料组分密切相关.关于钙钛矿薄膜的制备方法，相关的研究报道及综述较多，然而钙钛矿材料组分调控方面的研究梳理工作相对缺乏.本综述总结了近年来不同组分体系钙钛矿材料的研究进展，包括有机无机铅卤钙钛矿、全无机铅卤钙钛矿、少铅钙钛矿以及无铅钙钛矿.重点介绍了不同体系中具有代表性的材料组分及其对器件性能的影响，旨在梳理通过组分调控提高钙钛矿电池的效率及稳定性的研究思路，最终实现商业化应用.     

Controlled Logic Gates—Switch Gate and Fredkin Gate Based on Enzyme‐Biocatalyzed Reactions Realized in Flow Cells

Controlled logic gates, where the logic operations on the Data inputs are performed in the way determined by the Control signal, were designed in a chemical fashion. Specifically, the systems where the Data output signals directed to various output channels depending on the logic value of the Control input signal have been designed based on enzyme biocatalyzed reactions performed in a multi‐cell flow system. In the Switch gate one Data signal was directed to one of two possible output channels depending on the logic value of the Control input signal. In the reversible Fredkin gate the routing of two Data signals between two output channels is controlled by the third Control signal. The flow devices were created using a network of flow cells, each modified with one enzyme that biocatalyzed one chemical reaction. The enzymatic cascade was realized by moving the solution from one reacting cell to another which were organized in a specific network. The modular design of the enzyme‐based systems realized in the flow device allowed easy reconfiguration of the logic system, thus allowing simple extension of the logic operation from the 2‐input/3‐output channels in the Switch gate to the 3‐input/3‐output channels in the Fredkin gate. Further increase of the system complexity for realization of various logic processes is feasible with the use of the flow cell modular design.     

TiO2修饰La0.6Sr0.4Co0.2Fe0.8O3-δ用于中温固体氧化物燃料电池的阴极

纳米TiO2修饰的La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极被直接应用于YSZ电解质电池上. TiO2可阻止LSCF和YSZ间的化学反应,抑制SrZrO3的形成. LSCF-0.25 wt% TiO2阴极电池在0.7 V和600°C下的电流密度是LSCF阴极电池的1.6倍.电化学阻抗谱结果表明, TiO2修饰显著加快了氧离子注入电解质的过程,这可能与TiO2抑制了阴极/电解质界面处高电阻SrZrO3层的形成有关.本文为在ZrO2基电解质上使用高性能的(La,Sr)(Co,Fe)O3阴极材料提供了一种简单有效的方法.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

ABX3型钙钛矿光伏材料的结构与性质调控

近年来,钙钛矿太阳能电池由于其效率高、制造成本低、工艺简单等特点受到广泛关注,成为目前太阳能电池领域的研究热点。在钙钛矿太阳能电池中,无机-有机杂化ABX₃材料非常重要。它既作为光吸收材料,同时又作为载流子传输材料,因此它的光电性质直接影响到太阳能电池的效率。本文综述了调控无机有机金属卤化物ABX₃型钙钛矿光伏材料结构和性质的几种途径。     

NiY分子筛的合成及在微生物电解池阴极的析氢性能研究

在Na₂O-Al₂O₃-SiO₂-H₂O体系中添加硝酸镍,采用导向剂法合成了NiY分子筛。利用XRD、SEM、TEM、N₂吸附-脱附等手段对合成的NiY分子筛进行了表征。结果表明,随着镍添加量的增加,结晶度和zeta电位呈先增大后减小的趋势。当Si/Ni （mol ratio）大于5时,硝酸镍对分子筛的形成具有促进作用,当Si/Ni （mol ratio）小于5时,则具有抑制作用。晶粒粒径为1.5-3 μm,形貌为凹槽结构的六方或四方柱型,且具有微孔-介孔多级孔道结构特征。通过循环伏安曲线和极化曲线测试,在Si/Ni （mol ratio）=5时,样品的氧化还原性能最强,过电势最小,电催化活性最高。在12 h内,每4 mg的Si/Ni （mol ratio）=5样品,产气总量为10.1 mL,氢气纯度达81.69%,与Pt电极相比其氢气产量提高了28%。NiY分子筛表现出良好的析氢催化活性,有望取代Pt成为MEC新型阴极材料。     

以多聚甲醛为还原剂制备新型阳极Pt/CMK-3催化剂

 以多聚甲醛为还原剂,采用液相还原法制备了Pt/CMK-3直接甲醇燃料电池(DMFC)阳极催化剂,并采用透射电镜和X射线衍射技术对其进行了表征. 结果表明,有序介孔碳CMK-3具有规整的二维有序孔道结构,为DMFC中电子和燃料的传输提供了方便的路径,同时它较大的比表面积使得Pt纳米粒子很好地分散在其表面; Pt/CMK-3催化剂中Pt粒子的平均粒径为2.8 nm, 小于E-TEK公司的商品化Pt/XC-72和以甲醇为还原剂制备的Pt/C-M催化剂,并且粒径分布范围窄,结晶度低. 察了Pt/CMK-3催化剂对甲醇的电催化氧化性能,发现Pt/CMK-3催化剂对甲醇氧化的电催化性能优于Pt/XC-72和Pt/C-M催化剂.