FTIR studies of polyimides. II. Factors affecting quantitative measurement

Measurement of imidization by IR spectroscopy has frequently been reported to give results that are either insensitive to changes in the latter part of the cure or in conflict with observations by other methods. However, an analysis of imide formation using the 1370 cm^?1 band (C? N stretch) in conjunction with the 1500 cm^?1 aromatic band as an internal standard appears capable of giving precise, internally consistent measurements for the most commonly used polyimide structures, for samples that are measured in transmission. Measurements of imide content in ultrathin films by grazing incidence reflection spectroscopy appear to be at least semiquantitative. © 1993 John Wiley & Sons, Inc.     

Quantitative analysis of photoelectron angular distribution of single-domain organic monolayer film: NTCDA on GeS(0 0 1)

Angle-resolved photoelectron spectra were measured for a single-domain monolayer film of naphthalene-1,4,5,8-tetracarboxylic dianhydride (NTCDA) prepared on a cleaved GeS(0 0 1) surface using synchrotron radiation. The observed photoelectron angular distributions were analyzed by a calculation using the single-scattering approximation combined with molecular orbital calculation. With the help of the low-energy electron diffraction pattern, the structure of the NTCDA monolayer on GeS(0 0 1) was estimated quantitatively.     

An approach to sequence-specific antibody proteases

We describe here a novel strategy for the isolation of antibodies with sequence-specific protease activity: the synthesis of dipeptide haptens in which the targeted peptide bond has been replaced by a ring-strained or torsionally strained hydroxyethylene transition-state analog. Thus, the analogs mimic both a peptide bond in a distorted, reactive conformation and the transition state for peptide bond hydrolysis. In order to obtain sequence-specific antibody proteases, these analogs have been flanked with additional amino acid residues in preparation for immunization. In particular, we have synthesized peptides containing analogs such as 2-cis-amino-3-cis-hydroxycyclobutane carboxylic acid andendo-(3-amino-2-hydroxy)bicyclo[2.2.1]heptane-7-anti-carboxylic acid. We have also prepared a series of peptide derivatives containing analogs, such as 2-[3-amino-2-oxo-1-azetidinyl]-3-methylbutanoic acid, in which the targeted peptide bond has been incorporated into a β-lactam ring. Since the “peptide bond” has been left intact, these species mimic only a distorted ground state. At present, antibodies are being elicited against a number of the above peptide derivatives.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Immunosensors Based on Layer‐by‐Layer Self‐Assembled Au Colloidal Electrode for the Electrochemical Detection of Antigen

Colloidal Au particles have been deposited on the gold electrode through layer‐by‐layer self‐assembly using cysteamine as cross‐linkers. Self‐assembly of colloidal Au on the gold electrode resulted in an easier attachment of antibody, larger electrode surface and ideal electrode behavior. The redox reactions of [Fe(CN)₆]^4?/[Fe(CN)₆]^3? on the gold surface were blocked due to antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.0 with various concentrations of antigen at 37 °C for 30 min. Further, an amplification strategy to use biotin conjugated antibody was introduced for improving the sensitivity of impedance measurements. Thus, the sensor based on this immobilization method exhibits a large linear dynamic range, from 5–400 μg/L for detection of Human IgG. The detection limit is about 0.5 μg/L.     

末端碳链长度对偶氮苯自组装膜结构的影响

The end-group dominated molecular orientation in the azobenzene self-assembled monolayers (SAMs), CnAzoC2SH (n=1-4), on gold was evaluated for the first time by grazing incidence reflection absorption FTIR spectroscopy (RA-FTIR). All these azobenzene SAMs have highly-organized and closely-parked structures, with the molecule tilting away gradually from surface normal direction with the increase of end group alkyl length.     

聚(ε-己内酯)薄膜结晶形貌及分子取向研究

用匀胶机通过溶液铸膜方法在硅片和铝箔基板上分别制备具有不同厚度的聚(ε-己内酯)(PCL)薄膜. 通过原子力显微镜(AFM)和偏光衰减全反射傅里叶红外光谱(ATR-FTIR)对薄膜中PCL的结晶形貌、 片晶生长方式及分子链取向进行了研究. AFM结果表明, 在200 nm或更厚的薄膜中, PCL主要以侧立(edge-on)片晶的方式生长; 对于厚度小于200 nm的薄膜, PCL片晶更倾向于以平躺(flat-on)的方式生长. 这种片晶生长方式的改变在硅片和铝箔基板上都表现出同样的倾向. 此外, 在15 nm或更薄的薄膜中, PCL结晶由通常的球晶结构变为树枝状晶体. 偏光ATR-FTIR结果表明, 当膜厚小于200 nm时, 薄膜结晶中PCL分子链沿垂直于基板表面方向取向, 并且膜越薄, 取向程度越高, 与AFM的观测结果一致.     

Preferential Uniplanar Orientation of Cellulose Microfibrils Reinvestigated by the FTIR Technique

A simple detection method to observe the uniplanar orientation behavior of native cellulose microfibrils to the cell wall surface by using Fourier transform infrared (FTIR) spectroscopy in the transmission mode is reported. Four bands at 1372, 1355, 1337, and 1317 cm⁻¹ (the latter two have been mentioned previously by Liang and Marchessault (1960, J. Polym. Sci. 43: 85–100)) were found to be sensitive to such orientation: the two middle bands at 1355 and 1337 cm⁻¹ increase remarkably when the 0.60–61 nm lattice planes lie parallel to the cell wall surfaces. The reverse was true when the 0.53–54 nm lattice planes oriented preferentially. Polarization of the two bands at 1372 and 1355 cm⁻¹ was parallel, while that of the other two bands at lower wavenumbers, i.e., at 1337 and 1317 cm⁻¹, was perpendicular to the molecular axis of cellulose. These bands were assigned to OH-related motion, probably to in-plane OH bending, as reported by Maréchal and Chanzy (2000, J. Mol. Spectrosc. 523: 183–196).