Isolation and Structure Elucidation of Nortriterpenoids from Schisandra rubriflora

Seven new highly oxygenated nortriterpenoids, rubriflorins D–J ( 1 – 7 ), were isolated from the leaves and stems of Schisandra rubriflora, and their structures were elucidated on the basis of extensive analysis of spectroscopic data. These new compounds feature the opening of ring A compared with related known nortriterpenoids isolated from the genus Schisandra and showed weak activity against HIV‐1.     

Catalytic Activity of Nickel Alloys in Anodic Oxidation of the Hypophosphite Ion as a Function of Their Composition

The rate of anodic oxidation of the hypophosphite ion on alloys Ni-P, Ni-B, and Ni-Mo-P is studied as a function of their composition and structure. The organic compounds that are customarily used to stabilize electrolytes of electroless nickel plating are shown to come useful when controlling composition of the Ni-P coatings at the expense of their different influence on the rates of partial processes of deposition of the alloy components. The formation of catalytic activity of such coatings is affected mostly by a structural factor. With alloys Ni-P, Ni-B, and Ni-Mo-P, whose composition was varied by altering the concentration of the source of the alloying component, dependence of catalytic activity of the surface on the composition is defined mainly by an electronic factor.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 972–980.Original Russian Text Copyright © 2005 by Sotskaya, Dolgikh, Ryabinina.     

Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

Structure–activity studies on the fungitoxicity of some triorganotin(IV) compounds

Seventeen triorganotin(IV) compounds, with the general formula R₃SnX, containing symmetrical and unsymmetrical combinations of alkyl and aryl groups on tin and with a wide variation in the non-carbon-bonded anionic (X) residues, were examined along with three formally pentacoordinated adducts of triaryltin chlorides with triphenylphosphine oxide for their antifungal activity against nine plant pathogenic and saprophytic fungi. The in vitro tests included inhibitory studies on radial growth, mycelial growth, spore germination, and germ tube elongation. A significant finding was the dependence of fungitoxicity on the nature of the X group in both the tributyltin and triaryltin series, in contrast to earlier published reports on the negligible influence of the X groups on overall toxicity relative to the R group. This suggests that the X group is significantly involved in transporting the biocide to the reactive sites, and that the X group which tends to confer increased solubility to the triorganotin compound gives rise to increased activity. In studies of R group variations, tri-iso-butyltin bromide was found to be much less fungitoxic than tri-n-butyltin compounds, a result which is reconcilable in terms of increased steric encumbrance at the tin site in the former case. The steric factor is also implicated in the reduced activities observed for tris(p-tolyl)tin and tris(p-chlorophenyl)tin compounds relative to (Ph₃SnX) towards most of the fungi screened in this study. In general, it was also noted that the triaryltins were more selective in their antifungal action than the trialkyltins, which exhibited broad spectral activity when applied at the concentration level of 10 μg cm^?3.     

Azurocidin induces elastinolytic activity of medullasin

Addition of azurocidin, a protein in granulocytes similar to serine proteases but has no protease activity because of replacement of the active serine residue by glycine, to the incubation mixture containing medullasin induced elastinolytic activity of medullasin. Both medullasin and human leukocyte elastase were already shown to have negligible elastinolytic activity (Aoki, Y. et al. J. Biochem. 114, 122, 1993). Elastinolytic activity of medullasin was induced dose-dependently by the addition of azurocidin. Medullasin activity determined by using apo-ornithine transaminase or casein as substrates or that by N-methoxy-succinyl-(Ala)₂-Pro-Val-p-nitroanilide as substrate remained unchanged when azurocidin was added to the tube containing medullasin. Therefore, azurocidin is considered to cause an appearance of elastinolytic activity of medullasin without affecting the protease activity of it.     

双折射双频激光器偏振特性的分析

用激光原理和晶体光学原理分析了腔内加旋光晶体的激光器输出光的偏振特性，实验和分析表明，激光器输出两束不同频率的垂直线偏振光，激光器两端输出光的偏振面有一夹角ａ，且此夹角与晶轴和传光方向的夹角θ有关。理论计算结果在双折射双频激光器的实验结果符合很好。     

Polyethylene compounds with antimicrobial surface properties

The present study aims at antimicrobial polyethylene surfaces. To achieve this, LLDPE was compounded with the polymeric biocide poly(2-tert-butylaminoethyl) methacrylate TBAM (bulk modification with 1.5-5.0 wt.% of TBAM). Surfaces of these polymer compounds were then subjected to microbial assays. Using standard methods the colony forming units (CFU) for Escherichia coli and Staphylococcus aureus were determined on these surfaces. In all cases, polyethylene surfaces with highly antimicrobial properties were achieved. An average reduction of 10⁴ CFU ml⁻¹ compared to neat LLDPE was achieved. The surfaces of these LLDPE/TBAM compounds were assessed by electrokinetic (zeta potential) measurements. The results indicate a relation between the antimicrobial activity and the zeta-potential of the polymer compounds. Moreover, the antimicrobial compounds were investigated towards biofilm formation. Compared to pristine LLDPE, the surfaces of the polymer compounds showed less adhering biofilm after a testing period of 16 weeks.     

混合含氟对甲苄醇类菊酯的合成及其杀虫活性

报道了4种混合含氟对甲苄醇类拟除虫菊酯的新化合物,即三氟甲基氯菊酸、(±)-cis-二氯菊酸、(±)-trans-二氯菊酸、( )-trans-第一菊酸的含氟对甲苄酯的合成.生物活性测试的结果表明这些化合物对淡色库蚊四龄孑孓显示出较高的杀虫活性.     

丙环唑配合物的合成、缓释性能及生物活性研究

Five propiconazole(L) complexes (ML₂Cl₂, M=Zn(Ⅱ), Cu(Ⅱ), Co(Ⅱ); ML₄Cl₂, M=Ni(Ⅱ), Mn(Ⅱ)) were prepared and characterized by elemental analysis and IR. These complexes exhibited favorable controlled release property, it took 40 to 120 hours to release 85% amount of ligand in the water. The toxicity determination to Botrytis cinera, Rhizoctonia cerealis, Gibberella zeae, Fussrium moniliforme and Colletotrichum orbiculare indicated that the fungicidal activities of the complexes were better than that of the ligand except Mn-complex to Rhizoctonia cereali. The EC50 of Zn-propiconazole were 0.045 2～0.144 1 μg·mL^-1, Co- and Ni-propiconazole were 0.066 3～0.210 4 μg·mL^-1 and 0.183 9～0.340 7 μg·mL^-1, respectively, and Mn-propiconazole were only 0.353 6～0.538 0 μg·mL^-1. The growth regulation experiment to wheat seeding by dressing treating indicated that inhibiting activities of the complexes to root length and stem height were weaker than that of the ligand.